Joel Pilon wrote:
> Execute "tracelogger -s15" on the commandline. After the 15 seconds, the
> kev file /dev/shmem/tracebuffer.kev should be created with the captured
> events. You can then examine the events with traceprinter, or within the
> IDE by adding the .kev file to a project directory, then double clicking
> to open the kernel event file.
>   
In addition to what Joel said .. if you wanted to generate a log file 
for the first 15 seconds of your
system booting (vs the first 15 seconds from when you say ... GO!) then 
you will want to include
tracelogger (with the arguments Joel indicated and a '&' to background 
tracelogger) in your
startup script that is used to build your image and boot your system.

Hope this helps,
 Thomas

Hi,

  Thanks for reply.

Whether this option will consume some extra time to take a log, during
execution?




Best regards,
S.Pandian.

/*-------------------------------
A winner is not one who never fails,
     But one who NEVER QUITS!
----------------------------*/
-----Original Message-----
From: Joel Pilon [mailto:community-noreply@qnx.com] 
Sent: Tuesday, October 14, 2008 6:29 PM
To: general-community
Subject: Re: tracelogger kev file generation

Execute "tracelogger -s15" on the commandline. After the 15 seconds, the
kev file /dev/shmem/tracebuffer.kev should be created with the captured
events. You can then examine the events with traceprinter, or within the
IDE by adding the .kev file to a project directory, then double clicking
to open the kernel event file.

On Tue, 2008-10-14 at 05:47 -0400, pandian s wrote:
> hi,
>     what is the procedure to generate log file for first 15 seconds
> 
> thanks in advance.
> 
> Regards,
> SP.
> 
> _______________________________________________
> General
> http://community.qnx.com/sf/go/post14928
> 


_______________________________________________
General
http://community.qnx.com/sf/go/post14938