I had success with 0x1533
  ifconfig wm0 destroy
  io-pkt-v4 -d e1000 did=0x1533
I had no success with 0x15a3
  ifconfig wm0 destroy
  io-pkt-v4 -d e1000 did=0x1533

attached is the sloginfo. 
after a reboot I only have access to wm0 (0x10d3), no wm1, wm2.

Thanks, until tomorrow!

Corrected typing of last reply:
  ifconfig wm0 destroy
  io-pkt-v4 -d e1000 did=0x15a3

Please can you try the following and send me the sloginfo output:

slay io-pkt-v4
io-pkt-v4 -de1000 did=0x153a,verbose=2




On 2013/12/17, 10:40 AM, "Klaus Pantleon" <community-noreply@qnx.com>
wrote:

>I had success with 0x1533
>  ifconfig wm0 destroy
>  io-pkt-v4 -d e1000 did=0x1533
>I had no success with 0x15a3
>  ifconfig wm0 destroy
>  io-pkt-v4 -d e1000 did=0x1533
>
>attached is the sloginfo.
>after a reboot I only have access to wm0 (0x10d3), no wm1, wm2.
>
>Thanks, until tomorrow!
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post107606
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com

Sorry!!
It's very late and I should go home now :(
I made another typo in the call and therefore have to correct my statement:

All 3 network cards are sequentally usable with following:
  ifconfig wm0 destroy
  io-pkt-v4 -d e1000 did=0x10d3

  ifconfig wm0 destroy
  io-pkt-v4 -d e1000 did=0x1533

  ifconfig wm0 destroy
  io-pkt-v4 -d e1000 did=0x153a

What can I send you (tomorrow) to find the difference between QNX4 and QNX6 driver?

I¹m on vacation from tomorrow, so will only get to look at this in the New
Year.
At least I know that the driver works with 6.5.
Thanks for you help.



On 2013/12/17, 10:47 AM, "Klaus Pantleon" <community-noreply@qnx.com>
wrote:

>Sorry!!
>It's very late and I should go home now :(
>I made another typo in the call and therefore have to correct my
>statement:
>
>All 3 network cards are sequentally usable with following:
>  ifconfig wm0 destroy
>  io-pkt-v4 -d e1000 did=0x10d3
>
>  ifconfig wm0 destroy
>  io-pkt-v4 -d e1000 did=0x1533
>
>  ifconfig wm0 destroy
>  io-pkt-v4 -d e1000 did=0x153a
>
>What can I send you (tomorrow) to find the difference between QNX4 and
>QNX6 driver?
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post107609
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com

Hi Hugh,

attached you will find the sloginfo as text file.
Have a nice christmas and a happy new year!
I will be back in office at 9th of January.

Happy New Year!

Please try the attached driver - it should work now.



On 2013/12/19, 10:21 AM, "Klaus Pantleon" <community-noreply@qnx.com>
wrote:

>Hi Hugh,
>
>attached you will find the sloginfo as text file.
>Have a nice christmas and a happy new year!
>I will be back in office at 9th of January.
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post107664
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com

Hi Hugh and also a Happy New Year!

The driver is not starting up properly. Attached you will see the output on con1:

(root)//185/root>sin -P Net format a
ARGUMENTS
Net -b 300 -d 4 -T
/root/Net.e1000 -d1533 -l1
(root)//185/root> /root/Net.e1000 -d153a -l2 -vv

Net.e1000: proc_fun = e0:0a69
Net.e1000: vidbuf_inuse = e8:4bf0
Device 153a - Revision 4
reading PHY page 0 (or 0x0 shifted) reg 0x2
reading PHY page 0 (or 0x0 shifted) reg 0x3
EEPROM not present

PHY Initialization Error

setup_init_funcs failed
Net.e1000: INITIALIZATION ERROR 4
net_reg failed
(root)//185/root>

Happy New Year to you as well

I though that I had fixed the problem with the PHY Initialization error,
but it doesn¹t look like it. I have some urgent work right now, but will
have another look at the driver as soon as I get a chance. The problem
that I have is that I don¹t have the hardware to test the driver, so
please bear with me!

Thanks, Hugh.




On 2014/1/9, 9:00 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

>Hi Hugh and also a Happy New Year!
>
>The driver is not starting up properly. Attached you will see the output
>on con1:
>
>(root)//185/root>sin -P Net format a
>ARGUMENTS
>Net -b 300 -d 4 -T
>/root/Net.e1000 -d1533 -l1
>(root)//185/root> /root/Net.e1000 -d153a -l2 -vv
>
>Net.e1000: proc_fun = e0:0a69
>Net.e1000: vidbuf_inuse = e8:4bf0
>Device 153a - Revision 4
>reading PHY page 0 (or 0x0 shifted) reg 0x2
>reading PHY page 0 (or 0x0 shifted) reg 0x3
>EEPROM not present
>
>PHY Initialization Error
>
>setup_init_funcs failed
>Net.e1000: INITIALIZATION ERROR 4
>net_reg failed
>(root)//185/root>
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post107824
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com

Just to let you know that I haven¹t forgotten about you! I am having
trouble trying to get the 0x153a device working under QNX4, but will let
you know when I have some success.

Hugh.


On 2014/1/9, 9:00 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

>Hi Hugh and also a Happy New Year!
>
>The driver is not starting up properly. Attached you will see the output
>on con1:
>
>(root)//185/root>sin -P Net format a
>ARGUMENTS
>Net -b 300 -d 4 -T
>/root/Net.e1000 -d1533 -l1
>(root)//185/root> /root/Net.e1000 -d153a -l2 -vv
>
>Net.e1000: proc_fun = e0:0a69
>Net.e1000: vidbuf_inuse = e8:4bf0
>Device 153a - Revision 4
>reading PHY page 0 (or 0x0 shifted) reg 0x2
>reading PHY page 0 (or 0x0 shifted) reg 0x3
>EEPROM not present
>
>PHY Initialization Error
>
>setup_init_funcs failed
>Net.e1000: INITIALIZATION ERROR 4
>net_reg failed
>(root)//185/root>
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post107824
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com

Here¹s a working driver for you to try. I have run it with the 0x153a
device and it works fine.




On 2014/1/9, 9:00 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

>Hi Hugh and also a Happy New Year!
>
>The driver is not starting up properly. Attached you will see the output
>on con1:
>
>(root)//185/root>sin -P Net format a
>ARGUMENTS
>Net -b 300 -d 4 -T
>/root/Net.e1000 -d1533 -l1
>(root)//185/root> /root/Net.e1000 -d153a -l2 -vv
>
>Net.e1000: proc_fun = e0:0a69
>Net.e1000: vidbuf_inuse = e8:4bf0
>Device 153a - Revision 4
>reading PHY page 0 (or 0x0 shifted) reg 0x2
>reading PHY page 0 (or 0x0 shifted) reg 0x3
>EEPROM not present
>
>PHY Initialization Error
>
>setup_init_funcs failed
>Net.e1000: INITIALIZATION ERROR 4
>net_reg failed
>(root)//185/root>
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post107824
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com

Yes, you got it!!
Thanks a lot!
Now the new SIEMENS IPCs (647D, ...) are supported :)

Good news! Thanks for your patience.

Hugh.



On 2014/1/20, 11:07 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:

>Yes, you got it!!
>Thanks a lot!
>Now the new SIEMENS IPCs (647D, ...) are supported :)
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post108039
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com

Hello!

The updated driver is available on the Latest Software Updates page:

http://community.qnx.com/sf/wiki/do/viewPage/projects.qnx4/wiki/LatestSoftwareUpdates

Respectfully,
Oleg

20.01.2014, в 21:12:42, Hugh Brown написал:

> Good news! Thanks for your patience.
> 
> Hugh.
> 
> 
> 
> On 2014/1/20, 11:07 AM, "Klaus Pantleon" <community-noreply@qnx.com> wrote:
> 
>> Yes, you got it!!
>> Thanks a lot!
>> Now the new SIEMENS IPCs (647D, ...) are supported :)
>> 
>> 
>> 
>> _______________________________________________
>> 
>> General
>> http://community.qnx.com/sf/go/post108039
>> To cancel your subscription to this discussion, please e-mail
>> general-qnx4-unsubscribe@community.qnx.com
> 
> 
> 
> 
> 
> _______________________________________________
> 
> General
> http://community.qnx.com/sf/go/post108042
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com

Sorry, the command was:
io-pkt-v4 -d e1000 did=0x1533