Xilinx Zynq7000 ZC702 EVM Board Support Package#

This BSP supports the Xilinx Zync7000 All Programmable SoC, on the Xilinx ZC702 Evaluation Kit.

Releases#

Updated! QNX Neutrino 6.6.0 BSP#

Features#

QNX Neutrino SDP 6.6 Change History#

January 11, 2018#

• SDMMC: updated driver to new devb-sdmmc framework
• Networking: added getmac-i2c utility to read Ethernet MAC from I2C EEPROM. Removed MAC address spoofing when EEPROM read fails.
• QSPI-Flash: Errata AR# 47575 fix. Support for 4-byte addressing
• UART: support for multiple interfaces
• I2C: fixed i2c send issue, fixed clock issue
• SPI: fixed Chip Select behavior
• GPIO Lib: various bug fixes

August 20, 2014#

• initial post

QNX Neutrino 6.5.0 Service Pack 1 BSP#

Features#

QNX Neutrino 6.5.0 SP1 Change History#

August 18, 2014#

• updated GIC interrupt callout included in BSP, to reduce potential interrupt latency

January 24, 2014#

• include prebult boot.bif and fsbl.elf in BSP
• documentation updates to clarify process for building IPL binary with different versions of Xilinx tools
• minor fix for an incorrect #define in the startup code

June 14, 2013#

• add QSPI NOR flash driver source and DMA Library source
• fix for ClockPeriod() issue (use global timer)
• fix for ClockCycles() issue
• update to enable FPGA access after FPGA is programmed

May 15, 2013#

• update to address minor issues:
  • don't start watchdog timer by default in build file
  • include pre-built DMA library
  • remove duplicate wdtkick utility

May 14, 2013#

Release 1.00#

• Initial post