Installing the DSPlink archive#

Requirements

1. QNX SDP 6.4.0
2. Jacinto BSP 1.0.0 for 6.4.0
3. Updated startup-jacinto

To install the updated startup files

1. Contact your Support or Sales representitive to retrieve the updated startup files.
2. The following files have been updated: 'build', 'init_intrinfo.c', and 'main.c'
3. Copy the updated files to the startup folder of the BSP directory (<install_dir>/src/hardware/startup/boards/jacinto/)
4. Rebuild startup

To install the DSPlink archive:

1. Install the 6.4.0 Jacinto BSP by extracting to the directory of your choice
2. Extract the Dsplink archive into the root of where the BSP is installed or a directory of your choice
3. Navigate to the installation directory
4. Run the setenv.sh script to set up the installation directory for the Dsplink components without affecting the BSP

	. ./setenv.sh

1. Run make install to compile the DSPlink and the BSP.