Installing the DSPlink 1.6.1 archive#

Requirements

1. QNX SDP 6.4.0
2. Jacinto BSP 1.0.0 for 6.4.0
3. Updated startup-jacinto
4. Dsplink 1.6.1 archive

To install the updated startup files

1. Contact your Support or Sales representitive to retrieve the updated startup files.
2. The following files have been updated: 'build', 'init_intrinfo.c', and 'main.c'
3. Copy the updated files to the startup folder of the BSP directory (<install_dir>/src/hardware/startup/boards/jacinto/)
4. Rebuild startup

To install the DSPlink archive:

1. Install the 6.4.0 Jacinto BSP by extracting to the directory of your choice
2. Extract the Dsplink archive into the root of where the BSP is installed or a directory of your choice
3. Navigate to the installation directory
4. Run the setenv.sh script to set up the installation directory for the Dsplink components without affecting the BSP

	. ./setenv.sh

1. Run make install to compile the DSPlink and the BSP.