Project Home
Project Home
Project Information
Project Info
wiki2877: TiDsplinkInstallnotes (Version 4)

Installing the DSPlink 1.6.1 archive#


  1. QNX SDP 6.4.0
  2. Jacinto BSP 1.0.0 for 6.4.0
  3. Updated startup-jacinto
  4. Dsplink 1.6.1 archive

To install the updated startup files

  1. Contact your Support or Sales representitive to retrieve the updated startup files.
  2. The following files have been updated: 'build', 'init_intrinfo.c', and 'main.c'
  3. Copy the updated files to the startup folder of the BSP directory (<install_dir>/src/hardware/startup/boards/jacinto/)
  4. Rebuild startup

To install the DSPlink archive:

  1. Install the 6.4.0 Jacinto BSP by extracting to the directory of your choice
  2. Extract the Dsplink archive into the root of where the BSP is installed or a directory of your choice
  3. Navigate to the installation directory
  4. Run the script to set up the installation directory for the Dsplink components without affecting the BSP
	. ./
  1. Run make install to compile the DSPlink and the BSP.

Active Tab Versions Inactive Tab - left sideAssociations Inactive Tab - left sideAttachments Inactive Tab - left sideBack LinksInactive Tab - right side  
    Version From To Version Comment Created By
    Version 7 Add notes for configuring Dsplink Kevin Mar(deleted)  -  07/28/2009
    Version 6 Kevin Mar(deleted)  -  07/15/2009
    Version 5 Revert changes for Dsplink 1.40.05 Kevin Mar(deleted)  -  03/03/2009
    Version 4 Kevin Mar(deleted)  -  03/03/2009
    Version 3 Kevin Mar(deleted)  -  03/02/2009
    Version 2 Corrected the case in "DSPlink". Steve Reid  -  11/07/2008
    Version 1 Added instructions for installing the Dsplink archive. Steve Reid  -  11/07/2008