Texas Instruments DM355 EVM Board Support Package#
This BSP supports the Texas Instruments DM355 EVM board.
Releases#
QNX Neutrino Trunk#
QNX Neutrino 6.4.0#
QNX Neutrino 6.3.2#
Features#
| Feature | Planned Availability | Format | Notes |
|---|
| Audio | Completed | SRC | AIC33 audio codec |
| Ethernet | Completed | SRC | Ethernet_Davicom DM9000A |
| I2C | Completed | SRC | |
| Graphic | Completed | SRC | Mistral Quarter VGA LCD Module |
| NAND | Completed | SRC | MT29F16G08FA NAND Flash |
| Serial | Completed | SRC | 16550 UART |
| Startup | Completed | SRC | . |
| SD/MMC | Completed | SRC | DM355 MMC/SD Card Controller |
| SPI | Completed | SRC | . |
| lcdctl | Completed | SRC | LCD SPI control tool |
| USB 2.0 Device Controller | Completed | BIN | . |
| USB Mass Storage Device | Completed | BIN | . |
| USB Communication Device | Completed | BIN | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Texas Instruments DM355 EVM Trunk
QNX Neutrino 6.4.0 Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Texas Instruments DM355 EVM 1.0.0
1.0.0#
- Built using the latest 6.4.0 toolchain
QNX Neutrino 6.3.2 Change History#
1.0.0#
- Built using the QNX Neutrino 6.3.2 toolchain
- Support of all listed feature.
Search Keywords: dm, dm355, evm, ti, Texas Instruments, DM, DM355, EVM, TI
Show Details