Project Home
Project Home
Wiki
Wiki
Project Information
Project Info
wiki3951: TiAm3517EvmNto641ReleaseNotes


Release Notes for the QNX Neutrino 6.4.1 BSP for Texas Instruments AM3517 EVM Board#

Refer to the 1.0.0 release notes here




Active Tab Versions Inactive Tab - left sideAssociations Inactive Tab - left sideAttachments Inactive Tab - left sideBack LinksInactive Tab - right side  
    Version From To Version Comment Created By
    Version 23 move to 1.0.0 Bert Gemin  -  05/26/2010
    Version 22 Add USB OTG to driver commands summary. In known issues: change UI board to Application Board and remove USB OTG from unsupported ports. John McCarthy  -  05/07/2010
    Version 21 John McCarthy  -  05/07/2010
    Version 20 Reference new am/omap boot resource page instead of duplicating all info here. Andre Paquette(deleted)  -  04/22/2010
    Version 19 Ref 76310: Add note about failure to find ethernet PHY. Andre Paquette(deleted)  -  04/22/2010
    Version 18 Ref 76047 and 76107: Add notes about device problems on USB-OTG. Andre Paquette(deleted)  -  04/20/2010
    Version 17 Change instructions for installing IFS to NAND Flash. Use u-boot instead of serial loader. Andre Paquette(deleted)  -  04/08/2010
    Version 16 Ref # 75999: ethernet driver is now am35xx, not omap35xx and registers as am*, not omap*. Andre Paquette(deleted)  -  04/08/2010
    Version 15 Ref # 75250: Add more updates for ethernet, graphics. Andre Paquette(deleted)  -  04/07/2010
    Version 14 update Ethernet info Zhen Wang  -  04/07/2010
    Version 13 Ref #75292 -- add known issue regarding bogus log from mentor graphics driver. Andre Paquette(deleted)  -  03/26/2010
    Version 12 ditto Bert Gemin  -  03/22/2010
    Version 11 updated mmcinit line Bert Gemin  -  03/22/2010
    Version 10 changed mmc init to mmcinit. Bert Gemin  -  03/22/2010
    Version 9 Ref # 75252: Add notes about warnings from ethernet driver. Andre Paquette(deleted)  -  03/19/2010
    Version 8 Ref #75227: Add comment regarding MMC2 interface not supporting some SD cards. Andre Paquette(deleted)  -  03/10/2010
    Version 7 REF 74458 Change release notes to match processor name correction in BSP. Andre Paquette(deleted)  -  02/23/2010
    Version 6 Ref #74460: Add a section describing how to install the IPL for the 3517. Andre Paquette(deleted)  -  02/18/2010
    Version 5 Reference # 74459: Change board version name and raw file name from 3530 to 3517. Andre Paquette(deleted)  -  02/16/2010
    Version 4 Zhen Wang  -  12/03/2009
    Version 3 Zhen Wang  -  12/03/2009
    Version 2 Add CAN, NAND, RTC and DMA support Zhen Wang  -  12/03/2009
    Version 1 create Bert Gemin  -  10/22/2009