BSPs and Drivers
/
Wiki
/
TiAm3517EvmNto641ReleaseNotes
/
View Wiki Page
Search Wiki Pages
wiki3951: TiAm3517EvmNto641ReleaseNotes
This page does not exist. Why don’t you go and
create it
?
View HTML
View PDF
Hide Details
Versions
Associations
Attachments
Back Links
Version
From To
Version Comment
Created By
Version 23
move to 1.0.0
Bert Gemin(deleted)
- 05/26/2010
Version 22
Add USB OTG to driver commands summary. In known issues: change UI board to Application Board and remove USB OTG from unsupported ports.
John McCarthy
- 05/07/2010
Version 21
John McCarthy
- 05/07/2010
Version 20
Reference new am/omap boot resource page instead of duplicating all info here.
Andre Paquette(deleted)
- 04/22/2010
Version 19
Ref 76310: Add note about failure to find ethernet PHY.
Andre Paquette(deleted)
- 04/22/2010
Version 18
Ref 76047 and 76107: Add notes about device problems on USB-OTG.
Andre Paquette(deleted)
- 04/20/2010
Version 17
Change instructions for installing IFS to NAND Flash. Use u-boot instead of serial loader.
Andre Paquette(deleted)
- 04/08/2010
Version 16
Ref # 75999: ethernet driver is now am35xx, not omap35xx and registers as am*, not omap*.
Andre Paquette(deleted)
- 04/08/2010
Version 15
Ref # 75250: Add more updates for ethernet, graphics.
Andre Paquette(deleted)
- 04/07/2010
Version 14
update Ethernet info
Zhen Wang
- 04/07/2010
Version 13
Ref #75292 -- add known issue regarding bogus log from mentor graphics driver.
Andre Paquette(deleted)
- 03/26/2010
Version 12
ditto
Bert Gemin(deleted)
- 03/22/2010
Version 11
updated mmcinit line
Bert Gemin(deleted)
- 03/22/2010
Version 10
changed mmc init to mmcinit.
Bert Gemin(deleted)
- 03/22/2010
Version 9
Ref # 75252: Add notes about warnings from ethernet driver.
Andre Paquette(deleted)
- 03/19/2010
Version 8
Ref #75227: Add comment regarding MMC2 interface not supporting some SD cards.
Andre Paquette(deleted)
- 03/10/2010
Version 7
REF 74458 Change release notes to match processor name correction in BSP.
Andre Paquette(deleted)
- 02/23/2010
Version 6
Ref #74460: Add a section describing how to install the IPL for the 3517.
Andre Paquette(deleted)
- 02/18/2010
Version 5
Reference # 74459: Change board version name and raw file name from 3530 to 3517.
Andre Paquette(deleted)
- 02/16/2010
Version 4
Zhen Wang
- 12/03/2009
Version 3
Zhen Wang
- 12/03/2009
Version 2
Add CAN, NAND, RTC and DMA support
Zhen Wang
- 12/03/2009
Version 1
create
Bert Gemin(deleted)
- 10/22/2009
Compare