wiki3951: TiAm3517EvmNto641ReleaseNotes

Release Notes for the QNX Neutrino 6.4.1 BSP for Texas Instruments AM3517 EVM Board# Refer to the 1.0.0 release notes here

View HTML View PDF

	Versions		Associations		Attachments		Back Links

Version	From To	Version Comment	Created By
Version 23		move to 1.0.0	Bert Gemin(deleted)  -  05/26/2010
Version 22		Add USB OTG to driver commands summary. In known issues: change UI board to Application Board and remove USB OTG from unsupported ports.	John McCarthy  -  05/07/2010
Version 21			John McCarthy  -  05/07/2010
Version 20		Reference new am/omap boot resource page instead of duplicating all info here.	Andre Paquette(deleted)  -  04/22/2010
Version 19		Ref 76310: Add note about failure to find ethernet PHY.	Andre Paquette(deleted)  -  04/22/2010
Version 18		Ref 76047 and 76107: Add notes about device problems on USB-OTG.	Andre Paquette(deleted)  -  04/20/2010
Version 17		Change instructions for installing IFS to NAND Flash. Use u-boot instead of serial loader.	Andre Paquette(deleted)  -  04/08/2010
Version 16		Ref # 75999: ethernet driver is now am35xx, not omap35xx and registers as am*, not omap*.	Andre Paquette(deleted)  -  04/08/2010
Version 15		Ref # 75250: Add more updates for ethernet, graphics.	Andre Paquette(deleted)  -  04/07/2010
Version 14		update Ethernet info	Zhen Wang  -  04/07/2010
Version 13		Ref #75292 -- add known issue regarding bogus log from mentor graphics driver.	Andre Paquette(deleted)  -  03/26/2010
Version 12		ditto	Bert Gemin(deleted)  -  03/22/2010
Version 11		updated mmcinit line	Bert Gemin(deleted)  -  03/22/2010
Version 10		changed mmc init to mmcinit.	Bert Gemin(deleted)  -  03/22/2010
Version 9		Ref # 75252: Add notes about warnings from ethernet driver.	Andre Paquette(deleted)  -  03/19/2010
Version 8		Ref #75227: Add comment regarding MMC2 interface not supporting some SD cards.	Andre Paquette(deleted)  -  03/10/2010
Version 7		REF 74458 Change release notes to match processor name correction in BSP.	Andre Paquette(deleted)  -  02/23/2010
Version 6		Ref #74460: Add a section describing how to install the IPL for the 3517.	Andre Paquette(deleted)  -  02/18/2010
Version 5		Reference # 74459: Change board version name and raw file name from 3530 to 3517.	Andre Paquette(deleted)  -  02/16/2010
Version 4			Zhen Wang  -  12/03/2009
Version 3			Zhen Wang  -  12/03/2009
Version 2		Add CAN, NAND, RTC and DMA support	Zhen Wang  -  12/03/2009
Version 1		create	Bert Gemin(deleted)  -  10/22/2009
Compare