Project Home
Project Home
Project Information
Project Info
wiki4358: SDP_6.5.0_BSP_Info (Version 1)

SDP 6.5.0 BSP Information#

This page contains important information required to compile and package BSPs with the QNX Software Development Platform 6.5.0.

The 6.4.x information page can be found here.

6.5.0 Installation Notes

6.5.0 Interoperability #

Building 6.4.x BSPs with QNX SDP 6.5.0#

6.4.x BSPs should compile and work with QNX SDP 6.5.0

NOTE: 6.4.0 BSPs for e500-based boards cannot be used with SPE turned ON; you must use 6.4.1 versions of these BSPs instead

Building 6.4.1 BSPs with QNX SDP 6.4.0#

This is not supported, and upgrading to SDP 6.4.1 is required. NOTE: New BSPs will be delivered under 6.4.0 unless 6.4.1 is strictly required e.g. PPC-SPE.

Building 6.5.0 BSPs with QNX SDP 6.4.x#

This is not supported, and upgrading to SDP 6.5.0 is required.

Available BSPs#

A complete list of BSPs can be found here.

Compressed file [SDP_6.5.0_BSP_Info/]