Freescale MPC8572 DS Board Support Package#
This BSP supports the Freescale MPC8572 DS board.
Releases#
QNX Neutrino Trunk with SPE support#
QNX Neutrino Trunk without SPE support#
QNX Neutrino 6.4.0#
QNX Neutrino 6.3.2#
Features#
| Feature | Planned Availability | Format | Notes |
|---|
| Ethernet | Completed | BIN | eTSEC Ethernet controller in TSEC compatibility mode. Source can be downloaded from Networking project. |
| I2C | Completed | SRC | I2C controller |
| NAND | Completed | SRC | K9NBG08U5A-P (4G x 8 Bit) NAND Flash |
| PCI | 10/08 | SRC | . |
| PCIe | Completed | SRC | PCI Express controller |
| Serial | Completed | SRC | UART devices on RS-232 port 0-1 |
| SMP | 10/08 | . | . |
| Startup | Completed | SRC | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
- Built using the latest 6.4.1 toolchain
- Added:
- SPE (Signal Processing Engine) support
QNX Neutrino 6.4.0 Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale MPC8572 DS Trunk
1.0.0#
- Created from QNX Neutrino 6.3.2 BSP for Freescale MPC8572 DS 1.0.0
- Built using the latest 6.4.0 toolchain
- Added:
- Startup issue fix
- Added the TSEC Ethernet driver and HW accelerated crypto driver
QNX Neutrino 6.3.2 Change History#
1.0.0#
- Initial release under Apache II
- Includes:
- Ethernet
- I2C
- NAND
- PCIe
- Serial
- Startup
Search Keywords: 8572, mpc8572, ds, Freescale, MPC8572, DS
Show Details