Project Home
Project Home
Project Information
Project Info
wiki2974: FreescaleMpc5200bLite

Freescale Lite5200B and Media5200 Board Support Package#

This BSP supports the Freescale Lite5200B and Media5200 boards.


QNX Neutrino 6.4.0#

Date Version Prerequisites Installation Notes Release Notes License(s) Support Provider Download Source Tag
Latest trunk QNX Momentics 6.4.0 6.4.0 Generic Notes here QDL and Apache II Experimental QNX Project Downloads Coming Soon!
2009-11-20 1.0.0 QNX Momentics 6.4.0 6.4.0 Generic Notes here QDL and Apache II QNX QNX Project Downloads Coming Soon!

QNX Neutrino 6.3.0#

Date Version Prerequisites Installation Notes Release Notes License(s) Support Provider Download Source Tag
2007-09-12 1.0.4 QNX Momentics 6.3.x SP2 or later 6.3.2 Generic Notes here MEULA and Apache II QNX QNX QNX Download Center none


Feature Planned Availability Format Notes
Audio (Media5200 Only) Completed SRC Realtek ALC658
DMA Completed BIN Bestcomm5200 utility and library
EIDE Completed BIN On-board ATA controller
Ethernet Completed SRC On-board 10/100 BaseT Ethernet controller
I2C Completed SRC mpc5200 I2C manager
Flash Completed SRC AMD Flash: 32 MB (Lite5200b), 64 MB (Media5200)
PCI Completed SRC On-board PCI controller
Serial Completed SRC On-board UART: serpsc UART
SPI Completed SRC On-board SPI controller
Startup Completed SRC .
USB Host Completed BIN OHCI

Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board. The default buildfile starts the serial driver for the Media5200 board, if you have a Lite board, you'll need to comment the Media5200 serial driver section and uncomment the Lite serial driver section.

QNX Neutrino 6.4.0 Change History#


  • Created from QNX Neutrino 6.4.0 BSP for Freescale MPC5200 Lite 1.0.4
  • Built using the latest 6.4.0 toolchain

QNX Neutrino 6.3.0 Change History#


  • The ROM monitor flashed in the Media5200 board currently initializes the extended BAT registers. The startup code clears them now so the OS doesn't become unstable when booting from the ROM monitor.
  • The default buildfile provided with this BSP starts the flash driver and the touchscreen driver properly in the script section and it does now include the devf-mgt5200 driver or the calib utility in the OS image.
  • The default buildfile provided with this BSP now contains the full Photon environment. Uncommenting the Photon sections in the buildfile will create a fully functional Photon image for the Media5200 board.
  • Hardware flow control works for the PSC serial driver.
  • PCI devices behind a PCI-to-PCI bridge can now be enumerated and the PCI-to-PCI bridge can now be configured properly for these PCI devices.
  • Flash driver update for misaligned accesses on the Lite5200B or Media5200 boards.
  • Flash driver update for probing the hardware properly. It isn't necessary any more to run one instance of the flash driver per flash bank. We've also fixed the documentation accordingly.
  • IPL fix for the Lite5200B board. When swapping the two flash banks, their addresses were mirrored instead of swapped.
  • Added RTC utility for the Freescale MPC 5200 boards.
  • Fixed the use message for the devb-eide-mpc5200 driver.

Search Keywords: 5200, mpc5200, mgt5200, lite, media5200, Freescale, MPC5200, MGT5200, Lite

Active Tab Versions Inactive Tab - left sideAssociations Inactive Tab - left sideAttachments Inactive Tab - left sideBack LinksInactive Tab - right side  
    Version From To Version Comment Created By
    Version 15 clean up Bert Gemin(deleted)  -  04/08/2010
    Version 14 added in 6.4.0 1.0.0 Bert Gemin(deleted)  -  11/20/2009
    Version 13 Add a link to the 6.4.0 project download Ben Biron  -  12/11/2008
    Version 12 Removing test keyword Frederic Plante(deleted)  -  11/28/2008
    Version 11 Ben Biron  -  11/28/2008
    Version 10 Ben Biron  -  11/28/2008
    Version 9 Ben Biron  -  11/28/2008
    Version 8 Change the trunk download link to point directly to the package Ben Biron  -  11/28/2008
    Version 7 Ben Biron  -  11/26/2008
    Version 6 Ben Biron  -  11/26/2008
    Version 5 Ben Biron  -  11/26/2008
    Version 4 Ben Biron  -  11/26/2008
    Version 3 Ben Biron  -  11/26/2008
    Version 2 Remove invalid 6.3.0 BSP entry Ben Biron  -  11/26/2008
    Version 1 Initial version Ben Biron  -  11/26/2008