Freescale MPC5121e ADS Board Support Package#
This BSP supports the Freescale MPC5121e ADS board.
Releases#
QNX Neutrino Trunk#
QNX Neutrino 6.4.0#
QNX Neutrino 6.3.2#
Features#
| Feature | Planned Availability | Format | Notes |
|---|
| Audio | Completed | SRC | AC97 |
| CAN | Completed | SRC | . |
| DMA | Completed | SRC | . |
| EIDE | Completed | BIN | . |
| Ethernet | Completed | SRC | . |
| Graphics | Completed | BIN | . |
| I2C | Completed | SRC | . |
| IPL | Oct/08 | SRC | . |
| NAND | Completed | SRC | . |
| NOR | Completed | SRC | . |
| EIDE | Completed (PIO) Oct/08 (DMA) | SRC | . |
| PCI | Completed | SRC | . |
| PCIe | Completed | SRC | . |
| Serial | Completed | SRC | . |
| SPI | Completed | SRC | . |
| Startup | Completed | SRC | . |
| RTC | Completed | SRC | . |
| USB | Completed | BIN | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale MPC 5121e ADS Trunk
QNX Neutrino 6.4.0 Change History#
Trunk#
- Same as QNX Neutrino 6.4.0 BSP for Freescale MPC 5121e ADS 1.0.0
1.0.0#
- Created from QNX Neutrino 6.3.2 BSP for Freescale MPC 5121e ADS 1.0.0
QNX Neutrino 6.3.2 Change History#
1.0.0#
- Bug fixes
- Fixes major issues with USB
1.0.0 (20080917)#
- Release for silicon rev.2, board rev.3.5@rev.4
- Bug fixes
- Updated for silicon rev.2 - not compatible with previous silicon revisions
- Audio
- EIDE (PIO mode)
- Graphics
- I2S
- USB (EHCI)
1.0.0 (20080630)#
- Initial release under Apache II and QDL for silicon rev.1, board rev.2c @ rev.3.2
- Includes:
- Audio
- CAN driver
- DMA
- I2C driver
- I2S audio driver
- NAND flash driver
- Network driver
- NOR flash driver
- PCI driver
- RTC utility
- Serial driver
- SPI driver
- Startup
Show Details