Project Home
Project Home
Project Information
Project Info
wiki2943: Dell840

Dell PowerEdge 840 BASE Desktop/server#

The officially supported Dell PowerEdge 840 configuration is as follows. Note that you should always test your indivdual hardware configuraiton as delivered by the vendor as chipsets and configuration options change and support cannot be guaranteed. For specific details pertaining to any of the individual interfaces, see the QNX driver documentation.

Model Number 840 N/A
Base Unit Dual-Core Intel PentiumD Y
Bridge Chip Intel 3000 (consists of Intel E7230 Memory Controller Hub, with Intel 82801G (ICH7) I/O Controller) Y
Display External Analog 1280x1024 Y
Memory 1GB DDR2 Y
Keyboard Dell USB keyboard and Microsoft optical USB wheel mouse Y
Video Card ATI ES1000 (PCI Vendor ID 0x1002, PCI Device ID 0x515E) Y
Networking on-board single Gigabit Network Adapter - Broadcom NetXtreme BCM5721 Gigabit Ethernet PCI express (PCI Vendor ID 0x14E4, PCI Device ID 0x1659) Y
Wireless N/A N/A
Hard Drive 80 GB SATA 3.5-inch, 7200 RPM hard drive on-board SATA Y (no RAID support)
Touchpad N/A Y
USB I/O Ports 4 USB 2.0 Y
Firewire 1x IEEE 1394 Firewire N
Serial port 1 9-pin RS232 port Y
Floppy Disk Drive No Floppy Drive N/A
CD / DVD-ROM Drive N/A N/A
Audio Not tested N/A


QNX Neutrino 6.4#

The binaries are included in QNX Momentics 6.4.0 distribution.

QNX Neutrino 6.3.2/6.3.0 SP3#

Date Version Prerequisites Installation Notes Release Notes License(s) Support Provider Download Source Tag
2007-09-26 Patch ID 730 QNX Momentics 6.3.2/6.3.0 SP3 here hereMEULA QNX QNX QNX Download Center N/A


Feature Planned Availability Format Notes
Graphics Completed BIN .

QNX Neutrino 6.3.2/6.3.0 SP3 Change History#

Patch ID 730#

  • Support for graphics devices

Search Keywords: 86, x86, power, edge, 840, desktop, server, Dell, X86, Power, Edge, DESKTOP, SERVER