This BSP supports the LiPPERT CoreExpress board.
Releases#
QNX Neutrino Trunk#
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
Latest | trunk | QNX Momentics Trunk | Trunk Generic Notes | here | Apache II and QDL | Experimental | QNX | Coming Soon! | Coming Soon! |
QNX Neutrino 6.4.0#
Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
Latest | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | Apache II and QDL | Experimental | QNX | Coming Soon! | Coming Soon! |
Features#
Feature | Planned Availability | Format | Notes |
High Definition Audio | Completed | BIN | . |
IPL | Completed | BIN | “Cold Start” IPL, programmed to EEPROM. |
Startup | Completed | SRC | . |
Serial | Completed | SRC | . |
Ethernet | Completed | SRC | Intel 82551QM Ethernet Controller. |
EIDE | Completed | BIN | . |
SMbus Resource Manager | Completed | SRC | . |
USB | Completed | BIN | EHCI and UHCI. |
Graphics | Completed | BIN | . |
MMC / SD | Completed | BIN | . |
PCI / PCIe | Completed | SRC | PCIe devices are supported only in PCI legacy mode. |
Touchscreen | Completed | BIN | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.
QNX Neutrino Trunk Change History#
Trunk#
QNX Neutrino 6.4.0 Change History#
Trunk#
- Created from QNX Neutrino 6.3.2 BSP
- Built using the latest 6.4.0 toolchain