Quick Links
Downloads - BSP and Driver Downloads | Forum

---

Project overview#

The BSP project manages the development of BSPs and device drivers.

A BSP, or board support package, is the name given to the software responsible for hardware specific operations required to get an RTOs up and running. This typically consists of the following components:

• An optional IPL. This program is what is run from the reset and is responsible for some minimal hardware initialization, such as memory controller, serial port and possibly even Ethernet. This program then loads the next program, typically called the startup. The startup is usually loaded from flash, but can also be downloaded over the serial or network connections, depending on the capabilities of the IPL. U-boot usually provides the ability to load from the network, which is considerably faster than over serial. If a BSP does not provide an IPL, then this function will be performed by an on board ROM monitor or u-boot, provided by the board manufacturer.
• The startup program is responsible for completing the hardware initialization, binding in interrupt callouts and initializing hardware specific information which is passed to the operating system, and then transferring control to the kernel.
• Device drivers for all the peripherals on the chip and/or the board, which need to be supported. In addition to serial and network drivers, these typically include block, I2C, I2S, USB , graphics, sound as well as other possibly proprietary devices drivers.

What's in it for developers?#

The BSP project is intended to give developers access to all the resources required to write and modify BSPs for new hardware platforms. This includes:

• Access to all the packaged and tested BSP supporting QNX Neutrino for wide variety of reference platforms
• Access to the source for BSPs which can be used to develop support for custom HW platforms
• Driver development kits and driver source
• Documentation and training material to help get you get familiar and be able to modify Neutrino BSPs
• Test programs which can be used to validate the BSP
• Share your BSPs and drivers with the community by listing them in the directory
  • Contact us through the discussion forum or through the QNX Community Management Group

BSP developed by the community can be posted back to the QNX BSP project and shared with the rest of the community.

Downloads - BSP and Drivers Directory#

The BSPs and Drivers project manages the development of Board Support Packages (BSPs) and drivers for the QNX platform. It includes a directory of BSP and Drivers, some of which are developed transparently within the project.

Licenses#

QNX Development Suite licensees (see http://licensing.qnx.com/developer-licenses/) are entitled to download QNX Board Support Packages (“BSPs”) for use in association with the QNX Neutrino RTOS. These BSPs were originally packaged and released under various versions of the former Momentics End User License Agreement (“MEULA”) and their associated License Guides. As new versions of these software packages are released, they will be integrated into the current QNX Development Licenses. Until then, please refer to the appropriate MEULA, as indicated in the current version of the QNX Development Suite License Guide (see http://licensing.qnx.com/license-guide/).

• Apache II
• MEULA

Resources#

Resources that help the user work with, modify, and write BSPs are on the BSP project WIKI page.