Dell PowerEdge 840 BASE Desktop/server#

The officially supported Dell PowerEdge 840 configuration is as follows. Note that you should always test your indivdual hardware configuraiton as delivered by the vendor as chipsets and configuration options change and support cannot be guaranteed. For specific details pertaining to any of the individual interfaces, see the QNX driver documentation.

Model Number840N/A
Base UnitDual-Core Intel PentiumDY
Bridge ChipIntel 3000 (consists of Intel E7230 Memory Controller Hub, with Intel 82801G (ICH7) I/O Controller)Y
DisplayExternal Analog 1280x1024Y
Memory1GB DDR2Y
KeyboardDell USB keyboard and Microsoft optical USB wheel mouseY
Video CardATI ES1000 (PCI Vendor ID 0x1002, PCI Device ID 0x515E)Y
Networkingon-board single Gigabit Network Adapter - Broadcom NetXtreme BCM5721 Gigabit Ethernet PCI express (PCI Vendor ID 0x14E4, PCI Device ID 0x1659)Y
Hard Drive80 GB SATA 3.5-inch, 7200 RPM hard drive on-board SATAY (no RAID support)
USBI/O Ports 4 USB 2.0Y
Firewire1x IEEE 1394 FirewireN
Serial port1 9-pin RS232 portY
Floppy Disk DriveNo Floppy DriveN/A
AudioNot testedN/A


QNX Neutrino 6.4#

The binaries are included in QNX Momentics 6.4.0 distribution.

QNX Neutrino 6.3.2/6.3.0 SP3#

Date Version Prerequisites Installation NotesRelease NotesLicense(s) Support Provider Download Source Tag
2007-09-26Patch ID 730QNX Momentics 6.3.2/6.3.0 SP3here hereMEULAQNXQNXQNX Download Center N/A


Feature Planned Availability Format Notes

QNX Neutrino 6.3.2/6.3.0 SP3 Change History#

Patch ID 730#

Search Keywords: 86, x86, power, edge, 840, desktop, server, Dell, X86, Power, Edge, DESKTOP, SERVER