This BSP supports the Atmel At91sam9263 EK Board.
Note: A newer version of this BSP is found at http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/AT91SAM9263EKEvaluationBoard _
| Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
|---|---|---|---|---|---|---|---|---|---|
| Latest | trunk | QNX Momentics Trunk | Trunk Generic Notes | here | Restricted Apache II | Experimental | QNX | Project Downloads | Coming Soon! |
| Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
|---|---|---|---|---|---|---|---|---|---|
| Latest | trunk | QNX Momentics 6.4.0 | 6.4.0 Generic Notes | here | Restricted Apache II | Experimental | QNX | Project Downloads | Coming Soon! |
| Date | Version | Prerequisites | Installation Notes | Release Notes | License(s) | Support | Provider | Download | Source Tag |
|---|---|---|---|---|---|---|---|---|---|
| 2008-06-30 | 1.0.0 | QNX Momentics 6.3.2 + latest Character DDK | 6.3.2 Generic Notes | included in archive | Restricted Apache II | Experimental | QNX | Project Downloads | none |
| Feature | Planned Availability | Format | Notes |
|---|---|---|---|
| Audio | Completed | SRC | . |
| I2C | Completed | SRC | . |
| IPL | Completed | SRC | “Cold Start” IPL, programmed to Dataflash(Serial Flash) |
| SD Block | Completed | SRC | . |
| Serial | Completed | SRC | Supporting DB9 RS232 connectors, serial UART and DBGU UART modes of operation. |
| Ethernet | Completed | SRC | 10/100Mbit/s |
| SPI Host | Completed | SRC | . |
| SPI Slave | Completed | SRC | . |
| Startup | Completed | SRC | . |
| USB | Completed | BIN | QNX SPD 6.4.x (Binary Only) |
| Graphics | Completed | BIN | . |
Some of these drivers are commented out in the default buildfile. To use the drivers in the target hardware, you'll need to uncomment them in your buildfile, rebuild the image, and load the image into the board.