#
# The build file for QNX Neutrino 6.4.0 on Kontron nanoETXexpress-SP
#
[virtual=x86,bios_nokbd +compress] boot = {
	startup-bios -v
	PATH=/proc/boot:/bin:/usr/bin:/opt/bin LD_LIBRARY_PATH=/proc/boot:/lib:/usr/lib:/lib/dll:/opt/lib procnto -v
}

[+script] startup-script = {
	procmgr_symlink ../../proc/boot/libc.so.3 /usr/lib/ldqnx.so.2
	
	display_msg Welcome to QNX Neutrino on the Kontron nanoETXexpress-SP Module
	
	display_msg starting serial driver...
	devc-ser8250 -c1843200 -e -F -S -b115200 3f8,4
	
	devc-pty
	pipe

	slogger &

	pci-bios &
	waitfor /dev/pci 5

	display_msg starting USB stack...
	io-usb -duhci -dehci
	
	display_msg starting EIDE driver
	devb-eide blk auto=partition dos exe=all cam

	display_msg starting MMC/SD card driver
	devb-mmcsd blk cache=1M mmcsd vid=0x8086,did=0x811c

	display_msg starting network driver...
	io-pkt-v4-hc -de1000 -ptcpip

	display_msg starting HID drivers driver...
	waitfor /dev/io-usb/io-usb 5
	waitfor /dev/io-usb/devu-uhci.so 5
	waitfor /dev/io-usb/devu-ehci.so 5
	io-hid -d usb /dev/io-usb/io-usb
	devc-con-hid -n4 &
	reopen /dev/con1

	devb-umass &

	waitfor /dev/bpf0 5
	waitfor /dev/socket 5
	ifconfig en0 192.168.1.1
	inetd /proc/boot/inetd.conf
	
	display_msg starting audio driver...
	io-audio -dintel_hda &

	display_msg starting SMbus resource manager...
	smb-poulsbo &

	display_msg starting io-display
	io-display -v -d vid=0x8086,did=0x8108 &

	tinit &
}

/etc/config/ttys = {
ser1 "/bin/login -f root" qansi-m on
con1 "/bin/login -f root" qansi-m on
con2 "/bin/login" qansi-m on
con3 "/bin/login" qansi-m on 
con4 "/bin/login" qansi-m on
}

# remote access stuff
[uid=0 gid=0] 
/etc/ftpusers = {
}

/proc/boot/inetd.conf = {
ftp     stream  tcp nowait  root  /proc/boot/ftpd          in.ftpd -l
telnet  stream  tcp nowait  root  /proc/boot/telnetd       in.telnetd
shell   stream  tcp nowait  root  /proc/boot/rshd          in.rshd
login   stream  tcp nowait  root  /proc/boot/rlogind       in.rlogind
}

/etc/services = {
ftp		21/tcp
telnet		23/tcp
login		513/tcp
shell		514/tcp		cmd		# no passwords used
}

/etc/passwd = {
root::0:0:Superuser:/root:/bin/sh
}

[perms=400] /root/.rhosts = {
+ +
}

[type=link] /tmp=/dev/shmem
[type=link] /bin/sh=/proc/boot/ksh
[type=link] /bin/login=/proc/boot/login

libc.so
libhiddi.so
libusbdi.so

# Include all the files for the default filesystems
libcam.so
io-blk.so
cam-disk.so
fs-qnx4.so
fs-qnx6.so

#usb stuff
libusbdi.so
libhiddi.so
devu-ehci.so
devu-uhci.so

#io-hid stuff
devh-usb.so
devh-ps2ser.so

#audio stuff
libasound.so
deva-ctrl-intel_hda.so
deva-mixer-hda.so
deva-util-restore.so

#networking stuff
devn-e1000.so
devnp-shim.so
libsocket.so
lsm-qnet.so

#io-display stuff
devg-poulsbo.so
libm.so.2
devg-soft3d.so
libGLES_CM.so
libffb.so.2
libgf.so.1

[data=copy]
pci-poulsbo
pci-bios

devc-con-hid
devc-ser8250
tinit
cat
devc-pty
less
login
ls
mount
pci
pci-bios
pidin
pipe
setconf
shutdown
slay
sleep
slogger
sloginfo
umount
uname
use
cp
rm
chmod
ksh

smb-poulsbo

#block device stuff
devb-eide
devb-mmcsd

#audio stuff
io-audio
wave 

#NOR flash stuff
devf-fwh-poulsbo
flashctl

#networking stuff
fs-nfs3
hostname
ifconfig
inetd
ping
telnetd
ftpd
nicinfo
io-pkt-v4-hc

#usb stuff
usb
devb-umass
io-usb
io-hid

#graphics stuff
vsync
egl-gears
io-display
[search=../install/etc/system/config] /etc/system/config/display.conf=display.conf
[search=../install/etc/system/config] /etc/system/config/poulsbo.conf=poulsbo.conf