A few options.  Once you telnet into the target you can run ftp "from" the target to get the file to the target(in/dev/shmem), or if you really need to ftp into the target then you can put writable files into /dev/shmem ; just create a link in the build file from /etc/shadow to /dev/shmem/shadow. You could also use devf-ram to create a ram filesystem...that you could write to.

Devb suggestion wasn't mine. 

Sent from my BlackBerry 10 smartphone.

From: enes aykurt
Sent: Sunday, January 13, 2013 4:57 PM
To: general-filesystems
Reply To: general-filesystems@community.qnx.com
Subject: Re: RE: RE: ifs with ftp cabapility?

Hi Chris,

I have already done the telnet, my problem is about ftp. For ftp as you know I need also the shadow file because ftp user must have a password. However I could not figure out how to form and locate an encrypted file in ifs.I tried to form a shadow file by using a QNX disk system and used it on my ifs however that didnt work.

Tomorrow I will try the devb driver modification that you have suggested. Can you please explain me the affect of this option ?

regards




_______________________________________________

General
http://community.qnx.com/sf/go/post98536
To cancel your subscription to this discussion, please e-mail general-filesystems-unsubscribe@community.qnx.com