your problem is quite obviously not the syslog setup, but your build/flash process. Changing anything in the configuration without fixing the build/flash process will not fix anything.

On Thu, 2018-07-26 at 19:17 -0400, Venkata Nakka wrote:

Hi Michale,

I made the below changes in syslog.conf

*.*    /dev/console

1. When I built & flash those changes are not reflecting. still have *.* /dev/syslog
2. Is any other way to collect only syslogd logs.?



_______________________________________________

OSTech
http://community.qnx.com/sf/go/post119017
To cancel your subscription to this discussion, please e-mail ostech-core_os-unsubscribe@community.qnx.com