# Boot script
[virtual=x86,bios] .bootstrap = {
     startup-x86 -v
     #PATH=/proc/boot:/bin:/usr/bin LD_LIBRARY_PATH=/proc/boot:/lib:/usr/lib procnto-smp-instr -v
     #PATH=/bin:/sbin:/usr/sbin:/usr/bin:/proc/boot LD_LIBRARY_PATH=/proc/boot:/lib:/usr/lib:/lib/dll:/lib/dll/pci procnto-smp-instr -v
   PATH=/sbin:/usr/sbin:/bin:/usr/bin:/proc/boot:/x86/sbin:/x86/usr/sbin:/x86/bin:/x86/usr/bin LD_LIBRARY_PATH=/proc/boot:/lib:/usr/lib:/lib/dll:/lib/dll/pci:/x86/lib:/x86/usr/lib:/x86/lib/dll procnto-smp-instr -v
}

# Start-up script
[+script] .script = {
    # Programs expect to find the runtime linkers in /usr/lib/, but they're in /proc/boot, so we set up symbolic links to them.
    procmgr_symlink ../../proc/boot/libc.so /usr/lib/ldqnx.so.2

	display_msg Booting 

	display_msg "Starting slogger2 server ..."
	slogger2 -s2048k &
	waitfor /dev/slog2

	#display_msg "Starting PCI server ..."
   PCI_HW_MODULE=/lib/dll/pci/pci_hw-Intel_x86.so
   PCI_SLOG_MODULE=/lib/dll/pci/pci_slog2.so
   PCI_DEBUG_MODULE=/lib/dll/pci/pci_debug2.so
   PCI_BASE_VERBOSITY=3	
   #pci-server --aspace-enable

# Note: Specify the highest bus to be scanned during enumeration as below. See also pci-server 'use' information
#	pci-server --bus-scan-limit=16 --aspace-enable
	#waitfor /dev/pci

	display_msg "Starting some common services ..."
	dumper
	pipe
	random -t
	devc-pty

	display_msg "Starting USB host ..."
	io-usb-otg -n /dev/io-usb/io-usb -d xhci -d ehci -d ohci -d uhci
	waitfor /dev/io-usb/io-usb

	display_msg "Starting devb-umass ..."
#* FIXME: "ldd:FATAL: Could not load library libusbdi.so.2"
	devb-umass cam pnp &

	display_msg "Starting input services ..."
#* FIXME: "io_hid_dlopen, devh-usb.so DLL Error No valid library found"
	io-hid -d usb /dev/io-usb/io-usb
	waitfor /dev/io-hid/io-hid
}

# Components
[type=link] /usr/lib/ldqnx.so.2=/proc/boot/libc.so

[type=link] /bin/sh=/proc/boot/ksh
[type=link] /tmp=/dev/shmem
[type=link] /var/run=/dev/shmem
[type=link] /var/db=/dev/shmem

# Tried this without success
#[type=link] /usr/lib/libusbdi.so.2=/proc/boot/libusbdi.so

libc.so

io-blk.so
libcam.so
fs-qnx6.so

libm.so
libz.so
libslog2.so
libslog2parse.so
libtracelog.so
libpps.so
libbacktrace.so

libusbdi.so
libhiddi.so
devu-hcd-ehci.so
devu-hcd-ohci.so
devu-hcd-uhci.so
devu-hcd-xhci.so

devh-usb.so
devh-ps2ser.so

libsocket.so
devnp-e1000.so
devnp-rtl8169.so
libcrypto.so

#pci-server
# Note: if you wish to use pci-tool interactive mode, add [+raw] to the pci-tool inclusion below
# see 'use' information in pci-tool
#pci-tool
#rsrcdb_query
#[search=${QNX_TARGET}/etc/system/config/pci] /etc/system/config/pci/pcidatabase.com-tab_delimited.txt=pcidatabase.com-tab_delimited.txt
#[search=${QNX_TARGET}/etc/system/config/pci] /etc/system/config/pci/pci_hw-VMware.cfg=pci_hw-VMware.cfg

devb-ahci
devb-eide

ksh
waitfor
grep

devc-pty

devc-con
devc-con-hid
#devc-ser8250
devc-serusb

io-usb-otg
devb-umass
io-hid

cat
chmod
ls
pipe
mqueue
random
slogger2
mount
shutdown
fdisk
use
dumper
ln
tty
mkqnx6fs
dloader