SCU_CONFIG = 00005503, 4 cpus
Enabling Dcache and MMU
L2 cache enabled
CPU0: L1 Icache: 1024x32
CPU0: L1 Dcache: 1024x32 WB
CPU0: VFP-d32 FPSID=41033094
CPU0: NEON MVFR0=10110222 MVFR1=01111111
CPU0: 412fc09a: Cortex A9 MPCore rev 10 792MHz

Detected i.MX6 Dual/Quad, revision TO1.2

PLL1 - System     : 792MHz
PLL2 - System Bus : 528MHz
PLL3 - OTG USB    : 480MHz
PLL4 - Audio      : 36MHz
PLL5 - Video      : 339MHz
PLL7 - Host USB   : 480MHz
PLL8 - Enet       : 50MHz
IPG clock     : 66000000Hz
IPG per clock : 66000000Hz
UART clock    : 80000000Hz
CSPI clock    : 60000000Hz
AHB clock     : 132000000Hz
AXI clock     : 264000000Hz
EMI_SLOW clock: 29333333Hz
DDR clock     : 528000000Hz
USDHC1 clock  : 198000000Hz
USDHC2 clock  : 198000000Hz
USDHC3 clock  : 198000000Hz
USDHC4 clock  : 198000000Hz
ENFC clock    : 24000000Hz

decompressing...done
CPU1: L1 Icache: 1024x32
CPU1: L1 Dcache: 1024x32 WB
CPU1: VFP-d32 FPSID=41033094
CPU1: NEON MVFR0=10110222 MVFR1=01111111
CPU1: 412fc09a: Cortex A9 MPCore rev 10 792MHz
CPU2: L1 Icache: 1024x32
CPU2: L1 Dcache: 1024x32 WB
CPU2: VFP-d32 FPSID=41033094
CPU2: NEON MVFR0=10110222 MVFR1=01111111
CPU2: 412fc09a: Cortex A9 MPCore rev 10 792MHz
CPU3: L1 Icache: 1024x32
CPU3: L1 Dcache: 1024x32 WB
CPU3: VFP-d32 FPSID=41033094
CPU3: NEON MVFR0=10110222 MVFR1=01111111
CPU3: 412fc09a: Cortex A9 MPCore rev 10 792MHz
cpu_startnext: cpu1 -> fc411bd4
cpu_startnext: cpu2 -> fc411bd4
cpu_startnext: cpu3 -> fc411bd4

System page at phys:10023000 user:fc410000 kern:fc410000
Starting next program at vfe055e3c
cpu_startnext: cpu0 -> fe055e3c
VFPv3: fpsid=41033094
coproc_attach(10): attach fe071c34 (fe073b68)
coproc_attach(11): attach fe071c34 (fe073b68)
Welcome to QNX Neutrino 6.6.0 on the Freescale i.MX6Q Sabrelite (ARM Cortex-A9 MPCore)
Starting I2C1,2,3 driver (/dev/i2c1,2,3)...
Starting SD3 memory card driver...
Starting SD4 (microSD connector) memory card driver...
Path=0 - FREESCALE USDHC

Process 11 (dev-can-mx35) terminated SIGBUS code=3 fltno=5 ip=0106d0f8(/usr/lib/ldqnx.so.2@__generic_memset+0x58) mapaddr=0006d0f8. ref=28001080
Starting rtc utility...
Starting SATA driver...
Create RAM Disk for Filesystem
Path=0 - 
 target=0 lun=0     Direct-Access(0) - ram  Rev: 

Format complete: FAT12 (4096-byte clusters), 8168 kB available.
Starting Ethernet driver
Starting USB host1...
Path=0 - FREESCALE USDHC
 target=0 lun=0     Direct-Access(0) - SD:2 SA08G Rev: 1.1
Path=0 - 
 target=0 lun=0     Direct-Access(0) - ram  Rev: 

Format complete: FAT12 (4096-byte clusters), 8168 kB available.
setting env variables.
Starting Logging services...
Mount the RAM Disk for a filesystem
/dev/hd12t6 on / type dos (fat12) 
Starting PPS
pps: NOTICE: PPS initializing
pps: NOTICE: PPS attaching /pps
pps: NOTICE: PPS starting
Starting USBlauncher
{
        pps_publish = "function: 8052af9";
        product = "function: 8052379";
        ms_desc = "function: 80527e5";
        devno_detach = "function: 804e6e9";
        interface = "function: 805264d";
        show_config = "function: 8051b7d";
        match_types = "table: 80945a0";
        flags = "table: 8094550";
        configuration = "function: 80525a9";
        device = "function: 8052485";
        class = "function: 805270d";
        devno_attach = "function: 804e681";
}
{
        RoleSwap_DigitaliPodOut = "4";
        Ignore = "1";
        Always = "7";
        Start = "8";
        Default = "5";
        RoleSwap_AppleDevice = "3";
        Probe_iAP2 = "2";
        Never = "6";
        Driver = "0";
}
devices 3:
------------------ 1 ------------------
Match_Device  80b2b78
num_fields   0
idVendor     0
idProduct_lo 0
idProduct_hi 0xffff
bcdDevice_lo 0
bcdDevice_hi 0xffff
num_products 0
qi           0
conf_flags   0 :
{
}
        1:
        Match_Configuration  80b2c90
        num_fields          0
        bConfigurationValue 0
        conf_flags          0x80 :  Always
{
}
                1:
                Match_Interface  80b2cc8
                num_fields          0
                bInterfaceNumber_lo 0
                bInterfaceNumber_hi 0
                conf_flags          0x80 :  Always
{
}
                        1:
                        Match_Class  80b2be8
                        num_fields 1
                        bClass     0x2
                        bSubClass  0
                        bProtocol  0
                        conf_flags 0x1 :  Driver
{
        driver = "devc-serusb_dcd -e -v -F -s -d iface_list=0,path=/dev/io-usb-dcd";
}
        2:
        Match_Configuration  80b2d00
        num_fields          0
        bConfigurationValue 0
        conf_flags          0x80 :  Always
{
}
                1:
                Match_Interface  80b2d38
                num_fields          0
                bInterfaceNumber_lo 0
                bInterfaceNumber_hi 0
                conf_flags          0x80 :  Always
{
}
                        1:
                        Match_Class  80b2c58
                        num_fields 1
                        bClass     0x8
                        bSubClass  0
                        bProtocol  0
                        conf_flags 0x1 :  Driver
{
        driver = "devu-umass_client-block -s /dev/io-usb-dcd  -l lun=0,iface=0,fname=/dev/ram0";
}
------------------ 2 ------------------
Match_Device  80b2da8
num_fields   0
idVendor     0
idProduct_lo 0
idProduct_hi 0xffff
bcdDevice_lo 0
bcdDevice_hi 0xffff
num_products 0
qi           0
conf_flags   0 :
{
}
        1:
        Match_Configuration  80b2e50
        num_fields          0
        bConfigurationValue 0
        conf_flags          0x80 :  Always
{
}
                1:
                Match_Interface  80b2e88
P               num_fields          0
a               bInterfaceNumber_lo 0
t               bInterfaceNumber_hi 0
h               conf_flags          0x80 :  Always
={
0}
                        1:
-                       Match_Class  80b2e18
                        num_fields 1
AHCI (generic)                  bClass     0x8

                        bSubClass  0
                        bProtocol  0
                        conf_flags 0x1 :  Driver
{
        driver = "devb-umass $(DISK_OPTS) $(UMASS_OPTS),vid=$(vendor_id),did=$(product_id),busno=$(busno),devno=$(devno),iface=$(iface),ign_remove";
}
------------------ 3 ------------------
Match_Device  80b2ef8
num_fields   0
idVendor     0
idProduct_lo 0
idProduct_hi 0xffff
bcdDevice_lo 0
bcdDevice_hi 0xffff
num_products 0
qi           0
conf_flags   0 :
{
}
        1:
        Match_Configuration  80bf050
        num_fields          0
        bConfigurationValue 0
        conf_flags          0x80 :  Always
{
}
                1:
                Match_Interface  80bf088
                num_fields          0
                bInterfaceNumber_lo 0
                bInterfaceNumber_hi 0
                conf_flags          0x80 :  Always
{
}
                        1:
                        Match_Class  80b2f68
                        num_fields 2
                        bClass     0x2
                        bSubClass  0xd
                        bProtocol  0
                        conf_flags 0x101 :  Driver  Start
{
        driver = "echo NCM interface $(iface)";
}
----------------------------------------
Starting Screen Graphics...
Successfully loaded DLL "/lib/dll/pubs/pp-generic.so".
Mempool Map addr range[28100000-2c700000]
Mempool Map paddr range[36e00000-3b400000]
[Interrupt] Attached irqLine 41 with id 12.
[Interrupt] Attached irqLine 42 with id 13.
Attached resmgr to /dev/galcore with id:0.
done.
Launching devb-umass...
done
# sloginfo -t
Time                 Sev Major Minor Args
Jan 01 00:00:00.035    2    19   1800 devb-mmcsd-mx6q-sabrelite 1.00A (Feb 25 2014 15:49:58)
Jan 01 00:00:00.038    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.043    2    19   1800 devb-mmcsd-mx6q-sabrelite 1.00A (Feb 25 2014 15:49:58)
Jan 01 00:00:00.046    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.073    1     7     0 Using SSI Base 0x202c000
Jan 01 00:00:00.075    1     7     0 driver missing hw device index callback, ducking will not work properly between devices
Jan 01 00:00:00.075    1     7     0 driver missing hw device index callback, ducking will not work properly between devices
Jan 01 00:00:00.083    2    19   1500 devb-ahci cam ver 100 sim 1.00A (Feb 22 2014 18:44:06)
Jan 01 00:00:00.084    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.086    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.089    2     5   100 cam-disk.so (Feb 22 2014 18:44:04)
Jan 01 00:00:00.124    5    14     0 tcpip starting
Jan 01 00:00:00.125    3    14     0 Unable to attach to pci server: No such file or directory
Jan 01 00:00:00.125    3    14     0 Using pseudo random generator.  See "random" option
Jan 01 00:00:00.129    5    14     0 initializing IPsec... done
Jan 01 00:00:00.129    5    14     0 IPsec: Initialized Security Association Processing.
Jan 01 00:00:00.135    5    14     0 starting network driver
Jan 01 00:00:00.135    5    14     0 fec0
Jan 01 00:00:00.228    2     5   100 cam-disk.so (Feb 22 2014 18:44:04)
Jan 01 00:00:00.255    5    12     0 EHCI - Host Port changed
Jan 01 00:00:00.264    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.272    2     5   100 cam-disk.so (Feb 22 2014 18:44:04)
Jan 01 00:00:00.414    5    12     0 EHCI - Host Port changed
Jan 01 00:00:00.514    2    19   1500 eide_identify_devices: AHCI (generic) vid 0x0, did 0x0, class 0x0, rev 0x0, busno 0x0, dfunc 0x0, base 0x2200000, irq 0x47, xlat 0x8066d78
Jan 01 00:00:00.633    6    12   100 Fill out peripheral descriptors from templates
Jan 01 00:00:00.633    6    12   100 Trace: Device fillout header
Jan 01 00:00:00.633    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.633    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.634    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.634    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.634    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.634    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.634    5    12   100 Warning: undefined member description
Jan 01 00:00:00.634    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.634    5    12   100 Warning: undefined member description
Jan 01 00:00:00.635    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.635    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.635    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.635    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.635    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.635    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.635    5    12   100 Warning: undefined member description
Jan 01 00:00:00.635    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.635    5    12   100 Warning: undefined member description
Jan 01 00:00:00.636    6    12   100 Fill out peripheral descriptors from templates
Jan 01 00:00:00.636    6    12   100 Trace: Device fillout header
Jan 01 00:00:00.636    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.636    6    12   100 Trace: Association fillout child 1
Jan 01 00:00:00.636    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.636    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.637    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.637    6    12   100 Trace: Association fillout child 2
Jan 01 00:00:00.637    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.637    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.638    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.638    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.638    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.638    6    12   100 Trace: Association fillout header
Jan 01 00:00:00.639    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.639    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.639    6    12   100 Trace: Association fillout child 1
Jan 01 00:00:00.639    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.639    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.640    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.640    6    12   100 Trace: Association fillout child 2
Jan 01 00:00:00.640    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.640    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.640    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.640    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.641    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.641    6    12   100 Trace: Association fillout header
Jan 01 00:00:00.642    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.664    6    12   100 created pps (/pps/qnx/device/usb_ctrl?server,wait)
Jan 01 00:00:00.667    5     8   300 screen: starting up...
Jan 01 00:00:00.667    5     8   300 screen: connected to powman...
Jan 01 00:00:00.691    4     8   200 parse_device_config: NOTICE: the display-type option in graphics.conf is deprecated; use 'wfd-port-hdmi = 1' instead
Jan 01 00:00:00.691    5     8   200 parse_device_config: INFO: i.MX6 output -> WFD port mapping:  hdmi = 1, lvds0 = 0, lvds1 = 0, parallel0 = 0, parallel1 = 0
Jan 01 00:00:00.691    5     8   200 parse_device_config: INFO: i.MX6 outputs connected to each WFD port (counts):  1 0 0 0
Jan 01 00:00:00.691    4     8   200 parse_device_config: NOTICE: vsync-failure-limit set to 4
Jan 01 00:00:00.691    5     8   200 imx6x_ipu_init: INFO: i.MX6 chip silicon revision = 0x00630002
Jan 01 00:00:00.692    2     8   200 load_correction_values: fopen: /usr/lib/graphics/iMX6X/csc_gamma.conf: No such file or directory
Jan 01 00:00:00.692    2     8   200 load_correction_values: fopen: /usr/lib/graphics/iMX6X/csc_gamma.conf: No such file or directory
Jan 01 00:00:00.694    5     8   300 screen: loading EGL display 1...
Jan 01 00:00:00.700    5     8   200 gpu-contiguousMB   = 64 MB
Jan 01 00:00:00.700    5     8   200 gpu-internalPoolMB = 6 MB
Jan 01 00:00:00.700    5     8   200 gpu-sharedPoolMB   = 2 MB
Jan 01 00:00:00.700    5     8   200 gpu-slogUsageInterval = 0 (disabled)
Jan 01 00:00:00.700    5     8   200 gpu-powerManagement = 1
Jan 01 00:00:00.700    5     8   200 gpu-gpuProfiler     = 0
Jan 01 00:00:00.700    5     8   200 gpu power management is disabled
Jan 01 00:00:00.700    5     8   200 gpu-contiguousAbort = false
Jan 01 00:00:00.701    5     8   200 gpu-contiguousOnly = true
Jan 01 00:00:01.426    2    14     0 Count 0 in 499000000 ns so timestamp clock frequency unknown, defaulting to 125MHz
Jan 01 00:00:02.066    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.067    5     8   300 screen: loading blit module gc320v0...
Jan 01 00:00:02.080    5     8   200 HAL user version 4.6.9 build 9754 Feb 22 2014 18:59:31 (4.6.9.p13.qnx32 November 2013)
Jan 01 00:00:02.080    5     8   200 HAL kernel version 4.6.9 build 9754
Jan 01 00:00:02.327    5     8   300 screen: loading composition module gc320v0...
Jan 01 00:00:02.413    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.424    5     8   200 imx6x_irq_setup: INFO: Registered handler for IRQ38 for IPU1 port 1
Jan 01 00:00:02.424    5     8   200 imx6x_set_mode: INFO: Configuring HDMI for port 1
Jan 01 00:00:02.433    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.433    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.434    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.434    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.434    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.436    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.436    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.436    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.441    2    19   900 devb-umass 1.00A (Feb 22 2014 18:44:33)
Jan 01 00:00:02.446    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:02.478    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.478    6    12   100 Receive PULSE_CODE_PROCMGR
# sloginfo -wt &
[1] 172059
Time                 Sev Major Minor Args
Jan 01 00:00:00.035    2    19   1800 devb-mmcsd-mx6q-sabrelite 1.00A (Feb 25 2014 15:49:58)
Jan 01 00:00:00.038    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.043    2    19   1800 devb-mmcsd-mx6q-sabrelite 1.00A (Feb 25 2014 15:49:58)
Jan 01 00:00:00.046    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.073    1     7     0 Using SSI Base 0x202c000
Jan 01 00:00:00.075    1     7     0 driver missing hw device index callback, ducking will not work properly between devices
Jan 01 00:00:00.075    1     7     0 driver missing hw device index callback, ducking will not work properly between devices
Jan 01 00:00:00.083    2    19   1500 devb-ahci cam ver 100 sim 1.00A (Feb 22 2014 18:44:06)
Jan 01 00:00:00.084    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.086    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.089    2     5   100 cam-disk.so (Feb 22 2014 18:44:04)
Jan 01 00:00:00.124    5    14     0 tcpip starting
Jan 01 00:00:00.125    3    14     0 Unable to attach to pci server: No such file or directory
Jan 01 00:00:00.125    3    14     0 Using pseudo random generator.  See "random" option
Jan 01 00:00:00.129    5    14     0 initializing IPsec... done
Jan 01 00:00:00.129    5    14     0 IPsec: Initialized Security Association Processing.
Jan 01 00:00:00.135    5    14     0 starting network driver
Jan 01 00:00:00.135    5    14     0 fec0
Jan 01 00:00:00.228    2     5   100 cam-disk.so (Feb 22 2014 18:44:04)
Jan 01 00:00:00.255    5    12     0 EHCI - Host Port changed
Jan 01 00:00:00.264    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:00.272    2     5   100 cam-disk.so (Feb 22 2014 18:44:04)
Jan 01 00:00:00.414    5    12     0 EHCI - Host Port changed
Jan 01 00:00:00.514    2    19   1500 eide_identify_devices: AHCI (generic) vid 0x0, did 0x0, class 0x0, rev 0x0, busno 0x0, dfunc 0x0, base 0x2200000, irq 0x47, xlat 0x8066d78
Jan 01 00:00:00.633    6    12   100 Fill out peripheral descriptors from templates
Jan 01 00:00:00.633    6    12   100 Trace: Device fillout header
Jan 01 00:00:00.633    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.633    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.634    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.634    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.634    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.634    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.634    5    12   100 Warning: undefined member description
Jan 01 00:00:00.634    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.634    5    12   100 Warning: undefined member description
Jan 01 00:00:00.635    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.635    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.635    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.635    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.635    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.635    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.635    5    12   100 Warning: undefined member description
Jan 01 00:00:00.635    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.635    5    12   100 Warning: undefined member description
Jan 01 00:00:00.636    6    12   100 Fill out peripheral descriptors from templates
Jan 01 00:00:00.636    6    12   100 Trace: Device fillout header
Jan 01 00:00:00.636    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.636    6    12   100 Trace: Association fillout child 1
Jan 01 00:00:00.636    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.636    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.637    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.637    6    12   100 Trace: Association fillout child 2
Jan 01 00:00:00.637    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.637    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.638    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.638    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.638    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.638    6    12   100 Trace: Association fillout header
Jan 01 00:00:00.639    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.639    6    12   100 Trace: Config fillout child 1
Jan 01 00:00:00.639    6    12   100 Trace: Association fillout child 1
Jan 01 00:00:00.639    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.639    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.640    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.640    6    12   100 Trace: Association fillout child 2
Jan 01 00:00:00.640    6    12   100 Trace: Iface fillout child 1
Jan 01 00:00:00.640    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.640    6    12   100 Trace: Iface fillout child 2
Jan 01 00:00:00.640    6    12   100 Trace: Endpoint fillout header
Jan 01 00:00:00.641    6    12   100 Trace: Iface fillout header
Jan 01 00:00:00.641    6    12   100 Trace: Association fillout header
Jan 01 00:00:00.642    6    12   100 Trace: Config fillout header
Jan 01 00:00:00.664    6    12   100 created pps (/pps/qnx/device/usb_ctrl?server,wait)
Jan 01 00:00:00.667    5     8   300 screen: starting up...
Jan 01 00:00:00.667    5     8   300 screen: connected to powman...
Jan 01 00:00:00.691    4     8   200 parse_device_config: NOTICE: the display-type option in graphics.conf is deprecated; use 'wfd-port-hdmi = 1' instead
Jan 01 00:00:00.691    5     8   200 parse_device_config: INFO: i.MX6 output -> WFD port mapping:  hdmi = 1, lvds0 = 0, lvds1 = 0, parallel0 = 0, parallel1 = 0
Jan 01 00:00:00.691    5     8   200 parse_device_config: INFO: i.MX6 outputs connected to each WFD port (counts):  1 0 0 0
Jan 01 00:00:00.691    4     8   200 parse_device_config: NOTICE: vsync-failure-limit set to 4
Jan 01 00:00:00.691    5     8   200 imx6x_ipu_init: INFO: i.MX6 chip silicon revision = 0x00630002
Jan 01 00:00:00.692    2     8   200 load_correction_values: fopen: /usr/lib/graphics/iMX6X/csc_gamma.conf: No such file or directory
Jan 01 00:00:00.692    2     8   200 load_correction_values: fopen: /usr/lib/graphics/iMX6X/csc_gamma.conf: No such file or directory
Jan 01 00:00:00.694    5     8   300 screen: loading EGL display 1...
Jan 01 00:00:00.700    5     8   200 gpu-contiguousMB   = 64 MB
Jan 01 00:00:00.700    5     8   200 gpu-internalPoolMB = 6 MB
Jan 01 00:00:00.700    5     8   200 gpu-sharedPoolMB   = 2 MB
Jan 01 00:00:00.700    5     8   200 gpu-slogUsageInterval = 0 (disabled)
Jan 01 00:00:00.700    5     8   200 gpu-powerManagement = 1
Jan 01 00:00:00.700    5     8   200 gpu-gpuProfiler     = 0
Jan 01 00:00:00.700    5     8   200 gpu power management is disabled
Jan 01 00:00:00.700    5     8   200 gpu-contiguousAbort = false
Jan 01 00:00:00.701    5     8   200 gpu-contiguousOnly = true
Jan 01 00:00:01.426    2    14     0 Count 0 in 499000000 ns so timestamp clock frequency unknown, defaulting to 125MHz
Jan 01 00:00:02.066    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.067    5     8   300 screen: loading blit module gc320v0...
Jan 01 00:00:02.080    5     8   200 HAL user version 4.6.9 build 9754 Feb 22 2014 18:59:31 (4.6.9.p13.qnx32 November 2013)
Jan 01 00:00:02.080    5     8   200 HAL kernel version 4.6.9 build 9754
Jan 01 00:00:02.327    5     8   300 screen: loading composition module gc320v0...
Jan 01 00:00:02.413    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.424    5     8   200 imx6x_irq_setup: INFO: Registered handler for IRQ38 for IPU1 port 1
Jan 01 00:00:02.424    5     8   200 imx6x_set_mode: INFO: Configuring HDMI for port 1
Jan 01 00:00:02.433    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.433    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.434    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.434    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.434    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.435    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.436    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.436    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.436    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.437    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.441    2    19   900 devb-umass 1.00A (Feb 22 2014 18:44:33)
Jan 01 00:00:02.446    2     5     0 libcam.so (Feb 22 2014 18:44:02) bver 6060109
Jan 01 00:00:02.478    6    12   100 Receive PULSE_CODE_PROCMGR
Jan 01 00:00:02.478    6    12   100 Receive PULSE_CODE_PROCMGR
# echo "start_stack::device,2" >> /pps/qnx/usb_ctrl
# pidin arg
     pid Arguments
       1 procnto-smp-instr -v
       2 devc-sermx1 -e -F -S -c80000000 0x021E8000,59
       3 slogger
       4 pipe
       5 i2c-mx35 -p 0x021A0000 -i68 -c66000000
       6 i2c-mx35 -p 0x021A4000 -i69 -c66000000
       7 i2c-mx35 -p 0x021A8000 -i70 -c66000000
       8 devb-mmcsd-mx6q-sabrelite mmcsd ioport=0x02198000,irq=56 blk cache=2M
       9 devb-mmcsd-mx6q-sabrelite mmcsd ioport=0x0219C000,irq=57 blk cache=2M
      10 devf-norspi-mx6_sabrelite-ecspi
    8203 io-audio -d mx-mx6q-sabrelite mixer=input_mux=mic_in
    8204 devb-ahci ahci ioport=0x02200000,irq=71
    8205 devb-ram ram capacity=16384,nodinit,cache=512k disk name=hd@12
   32782 io-pkt-v6-hc -dmx6x
   32783 io-usb -c -dehci-mx28 ioport=0x02184300,irq=72,phy=0x020ca000,verbose=5
   32784 devb-ram ram capacity=16384,nodinit,cache=512k disk name=hd@10
   57361 ksh /proc/boot/.console.sh
   57362 slogger2 -U1001:1000
   98323 pps -v -l0 -C -t 300000
  118804 usblauncher -h -vvvl -p 2 -t -s /lib/dll/pubs/
  122901 dhcp.client
  122902 screen
  131095 devb-umass cam pnp
  131096 devc-pty
  155673 qconn port=8000
  159770 ksh ksh
  172059 sloginfo -wt
  176156 pidin arg
# 