U-Boot 2014.01-00067-g75bfe92 (Feb 28 2014 - 10:39:28) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: SABRE Lite I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME], usb_ether Hit any key to stop autoboot: 0 mmc1 is current device reading ifs-mx6q-sabrelite.raw 17848256 bytes read in 819 ms (20.8 MiB/s) ## Starting application at 0x10800000 ... SCU_CONFIG = 00005503, 4 cpus Enabling Dcache and MMU L2 cache enabled CPU0: L1 Icache: 1024x32 CPU0: L1 Dcache: 1024x32 WB CPU0: VFP-d32 FPSID=41033094 CPU0: NEON MVFR0=10110222 MVFR1=01111111 CPU0: 412fc09a: Cortex A9 MPCore rev 10 792MHz Detected i.MX6 Dual/Quad, revision TO1.2 PLL1 - System : 792MHz PLL2 - System Bus : 528MHz PLL3 - OTG USB : 480MHz PLL4 - Audio : 36MHz PLL5 - Video : 339MHz PLL7 - Host USB : 480MHz PLL8 - Enet : 50MHz IPG clock : 66000000Hz IPG per clock : 66000000Hz UART clock : 80000000Hz CSPI clock : 60000000Hz AHB clock : 132000000Hz AXI clock : 264000000Hz EMI_SLOW clock: 29333333Hz DDR clock : 528000000Hz USDHC1 clock : 198000000Hz USDHC2 clock : 198000000Hz USDHC3 clock : 198000000Hz USDHC4 clock : 198000000Hz ENFC clock : 24000000Hz decompressing...done CPU1: L1 Icache: 1024x32 CPU1: L1 Dcache: 1024x32 WB CPU1: VFP-d32 FPSID=41033094 CPU1: NEON MVFR0=10110222 MVFR1=01111111 CPU1: 412fc09a: Cortex A9 MPCore rev 10 792MHz CPU2: L1 Icache: 1024x32 CPU2: L1 Dcache: 1024x32 WB CPU2: VFP-d32 FPSID=41033094 CPU2: NEON MVFR0=10110222 MVFR1=01111111 CPU2: 412fc09a: Cortex A9 MPCore rev 10 792MHz CPU3: L1 Icache: 1024x32 CPU3: L1 Dcache: 1024x32 WB CPU3: VFP-d32 FPSID=41033094 CPU3: NEON MVFR0=10110222 MVFR1=01111111 CPU3: 412fc09a: Cortex A9 MPCore rev 10 792MHz cpu_startnext: cpu1 -> fc411bd4 cpu_startnext: cpu2 -> fc411bd4 cpu_startnext: cpu3 -> fc411bd4 System page at phys:10023000 user:fc410000 kern:fc410000 Starting next program at vfe055e3c cpu_startnext: cpu0 -> fe055e3c VFPv3: fpsid=41033094 coproc_attach(10): attach fe071c34 (fe073b68) coproc_attach(11): attach fe071c34 (fe073b68) Welcome to QNX Neutrino 6.6.0 on the Freescale i.MX6Q Sabrelite (ARM Cortex-A9 MPCore) Starting I2C1,2,3 driver (/dev/i2c1,2,3)... Starting SD3 memory card driver... Starting SD4 (microSD connector) memory card driver... Path=0 - FREESCALE USDHC Process 11 (dev-can-mx35) terminated SIGBUS code=3 fltno=5 ip=0106d0f8(/usr/lib/ldqnx.so.2@__generic_memset+0x58) mapaddr=0006d0f8. ref=28001080 Starting rtc utility... Starting SATA driver... Create RAM Disk for Filesystem Path=0 - target=0 lun=0 Direct-Access(0) - ram Rev: Format complete: FAT12 (4096-byte clusters), 8168 kB available. Starting Ethernet driver Starting USB host1... Path=0 - FREESCALE USDHC target=0 lun=0 Direct-Access(0) - SD:2 SA08G Rev: 1.1 Path=0 - target=0 lun=0 Direct-Access(0) - ram Rev: Format complete: FAT12 (4096-byte clusters), 8168 kB available. setting env variables. Starting Logging services... Mount the RAM Disk for a filesystem /dev/hd12t6 on / type dos (fat12) Starting PPS pps: NOTICE: PPS initializing pps: NOTICE: PPS attaching /pps pps: NOTICE: PPS starting Starting USBlauncher { pps_publish = "function: 8052af9"; product = "function: 8052379"; ms_desc = "function: 80527e5"; devno_detach = "function: 804e6e9"; interface = "function: 805264d"; show_config = "function: 8051b7d"; match_types = "table: 80945a0"; flags = "table: 8094550"; configuration = "function: 80525a9"; device = "function: 8052485"; class = "function: 805270d"; devno_attach = "function: 804e681"; } { RoleSwap_DigitaliPodOut = "4"; Ignore = "1"; Always = "7"; Start = "8"; Default = "5"; RoleSwap_AppleDevice = "3"; Probe_iAP2 = "2"; Never = "6"; Driver = "0"; } devices 3: ------------------ 1 ------------------ Match_Device 80b2b78 num_fields 0 idVendor 0 idProduct_lo 0 idProduct_hi 0xffff bcdDevice_lo 0 bcdDevice_hi 0xffff num_products 0 qi 0 conf_flags 0 : { } 1: Match_Configuration 80b2c90 num_fields 0 bConfigurationValue 0 conf_flags 0x80 : Always { } 1: Match_Interface 80b2cc8 num_fields 0 bInterfaceNumber_lo 0 bInterfaceNumber_hi 0 conf_flags 0x80 : Always { } 1: Match_Class 80b2be8 num_fields 1 bClass 0x2 bSubClass 0 bProtocol 0 conf_flags 0x1 : Driver { driver = "devc-serusb_dcd -e -v -F -s -d iface_list=0,path=/dev/io-usb-dcd"; } 2: Match_Configuration 80b2d00 num_fields 0 bConfigurationValue 0 conf_flags 0x80 : Always { } 1: Match_Interface 80b2d38 num_fields 0 bInterfaceNumber_lo 0 bInterfaceNumber_hi 0 conf_flags 0x80 : Always { } 1: Match_Class 80b2c58 num_fields 1 bClass 0x8 bSubClass 0 bProtocol 0 conf_flags 0x1 : Driver { driver = "devu-umass_client-block -s /dev/io-usb-dcd -l lun=0,iface=0,fname=/dev/ram0"; } ------------------ 2 ------------------ Match_Device 80b2da8 num_fields 0 idVendor 0 idProduct_lo 0 idProduct_hi 0xffff bcdDevice_lo 0 bcdDevice_hi 0xffff num_products 0 qi 0 conf_flags 0 : { } 1: Match_Configuration 80b2e50 num_fields 0 bConfigurationValue 0 conf_flags 0x80 : Always { } 1: Match_Interface 80b2e88 P num_fields 0 a bInterfaceNumber_lo 0 t bInterfaceNumber_hi 0 h conf_flags 0x80 : Always ={ 0} 1: - Match_Class 80b2e18 num_fields 1 AHCI (generic) bClass 0x8 bSubClass 0 bProtocol 0 conf_flags 0x1 : Driver { driver = "devb-umass $(DISK_OPTS) $(UMASS_OPTS),vid=$(vendor_id),did=$(product_id),busno=$(busno),devno=$(devno),iface=$(iface),ign_remove"; } ------------------ 3 ------------------ Match_Device 80b2ef8 num_fields 0 idVendor 0 idProduct_lo 0 idProduct_hi 0xffff bcdDevice_lo 0 bcdDevice_hi 0xffff num_products 0 qi 0 conf_flags 0 : { } 1: Match_Configuration 80bf050 num_fields 0 bConfigurationValue 0 conf_flags 0x80 : Always { } 1: Match_Interface 80bf088 num_fields 0 bInterfaceNumber_lo 0 bInterfaceNumber_hi 0 conf_flags 0x80 : Always { } 1: Match_Class 80b2f68 num_fields 2 bClass 0x2 bSubClass 0xd bProtocol 0 conf_flags 0x101 : Driver Start { driver = "echo NCM interface $(iface)"; } ---------------------------------------- Time Sev Major Minor Args Jan 01 00:00:00.035 2 19 1800 devb-mmcsd-mx6q-sabrelite 1.00A (Feb 25 2014 15:49:58) Jan 01 00:00:00.038 2 5 0 libcam.so (Feb 22 2014 18:44:02) bver 6060109 Jan 01 00:00:00.043 2 19 1800 devb-mmcsd-mx6q-sabrelite 1.00A (Feb 25 2014 15:49:58) Jan 01 00:00:00.046 2 5 0 libcam.so (Feb 22 2014 18:44:02) bver 6060109 Jan 01 00:00:00.073 1 7 0 Using SSI Base 0x202c000 Jan 01 00:00:00.075 1 7 0 driver missing hw device index callback, ducking will not work properly between devices Jan 01 00:00:00.075 1 7 0 driver missing hw device index callback, ducking will not work properly between devices Successfully loaded DLL "/lib/dll/pubs/pp-generic.so". Jan 01 00:00:00.083 2 19 1500 devb-ahci cam ver 100 sim 1.00A (Feb 22 2014 18:44:06) Jan 01 00:00:00.084 2 5 0 libcam.so (Feb 22 2014 18:44:02) bver 6060109 Jan 01 00:00:00.086 2 5 0 libcam.so (Feb 22 2014 18:44:02) bver 6060109 Jan 01 00:00:00.089 2 5 100 cam-disk.so (Feb 22 2014 18:44:04) Jan 01 00:00:00.124 5 14 0 tcpip starting Jan 01 00:00:00.125 3 14 0 Unable to attach to pci server: No such file or directory Jan 01 00:00:00.125 3 14 0 Using pseudo random generator. See "random" option Jan 01 00:00:00.129 5 14 0 initializing IPsec... done Jan 01 00:00:00.130 5 14 0 IPsec: Initialized Security Association Processing. Jan 01 00:00:00.135 5 14 0 starting network driver Jan 01 00:00:00.135 5 14 0 fec0 Jan 01 00:00:00.226 2 5 100 cam-disk.so (Feb 22 2014 18:44:04) Jan 01 00:00:00.255 5 12 0 EHCI - Host Port changed Jan 01 00:00:00.264 2 5 0 libcam.so (Feb 22 2014 18:44:02) bver 6060109 Jan 01 00:00:00.272 2 5 100 cam-disk.so (Feb 22 2014 18:44:04) Jan 01 00:00:00.414 5 12 0 EHCI - Host Port changed Jan 01 00:00:00.517 2 19 1500 eide_identify_devices: AHCI (generic) vid 0x0, did 0x0, class 0x0, rev 0x0, busno 0x0, dfunc 0x0, base 0x2200000, irq 0x47, xlat 0x8066d78 Jan 01 00:00:00.632 6 12 100 Fill out peripheral descriptors from templates Jan 01 00:00:00.632 6 12 100 Trace: Device fillout header Jan 01 00:00:00.632 6 12 100 Trace: Config fillout child 1 Jan 01 00:00:00.632 6 12 100 Trace: Iface fillout child 1 Jan 01 00:00:00.632 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.633 6 12 100 Trace: Iface fillout child 2 Jan 01 00:00:00.633 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.633 6 12 100 Trace: Iface fillout header Jan 01 00:00:00.633 5 12 100 Warning: undefined member description Jan 01 00:00:00.633 6 12 100 Trace: Config fillout header Jan 01 00:00:00.633 5 12 100 Warning: undefined member description Jan 01 00:00:00.633 6 12 100 Trace: Config fillout child 1 Jan 01 00:00:00.633 6 12 100 Trace: Iface fillout child 1 Jan 01 00:00:00.633 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.634 6 12 100 Trace: Iface fillout child 2 Jan 01 00:00:00.634 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.634 6 12 100 Trace: Iface fillout header Jan 01 00:00:00.634 5 12 100 Warning: undefined member description Jan 01 00:00:00.634 6 12 100 Trace: Config fillout header Jan 01 00:00:00.634 5 12 100 Warning: undefined member description Jan 01 00:00:00.634 6 12 100 Fill out peripheral descriptors from templates Jan 01 00:00:00.634 6 12 100 Trace: Device fillout header Jan 01 00:00:00.635 6 12 100 Trace: Config fillout child 1 Jan 01 00:00:00.635 6 12 100 Trace: Association fillout child 1 Jan 01 00:00:00.635 6 12 100 Trace: Iface fillout child 1 Jan 01 00:00:00.635 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.635 6 12 100 Trace: Iface fillout header Jan 01 00:00:00.636 6 12 100 Trace: Association fillout child 2 Jan 01 00:00:00.636 6 12 100 Trace: Iface fillout child 1 Jan 01 00:00:00.636 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.636 6 12 100 Trace: Iface fillout child 2 Jan 01 00:00:00.636 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.636 6 12 100 Trace: Iface fillout header Jan 01 00:00:00.637 6 12 100 Trace: Association fillout header Jan 01 00:00:00.637 6 12 100 Trace: Config fillout header Jan 01 00:00:00.638 6 12 100 Trace: Config fillout child 1 Jan 01 00:00:00.638 6 12 100 Trace: Association fillout child 1 Jan 01 00:00:00.638 6 12 100 Trace: Iface fillout child 1 Jan 01 00:00:00.638 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.638 6 12 100 Trace: Iface fillout header Jan 01 00:00:00.639 6 12 100 Trace: Association fillout child 2 Jan 01 00:00:00.639 6 12 100 Trace: Iface fillout child 1 Jan 01 00:00:00.639 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.639 6 12 100 Trace: Iface fillout child 2 Jan 01 00:00:00.639 6 12 100 Trace: Endpoint fillout header Jan 01 00:00:00.639 6 12 100 Trace: Iface fillout header Jan 01 00:00:00.640 6 12 100 Trace: Association fillout header Jan 01 00:00:00.640 6 12 100 Trace: Config fillout header Jan 01 00:00:00.787 6 12 100 created pps (/pps/qnx/device/usb_ctrl?server,wait) ulink_ctrl - error connecting io-usb No such file or directory Starting Screen Graphics... Jan 01 00:00:01.674 5 8 300 screen: starting up... Jan 01 00:00:01.674 5 8 300 screen: connected to powman... Jan 01 00:00:01.695 4 8 200 parse_device_config: NOTICE: the display-type option in graphics.conf is deprecated; use 'wfd-port-hdmi = 1' instead Jan 01 00:00:01.695 5 8 200 parse_device_config: INFO: i.MX6 output -> WFD port mapping: hdmi = 1, lvds0 = 0, lvds1 = 0, parallel0 = 0, parallel1 = 0 Jan 01 00:00:01.696 5 8 200 parse_device_config: INFO: i.MX6 outputs connected to each WFD port (counts): 1 0 0 0 Jan 01 00:00:01.696 4 8 200 parse_device_config: NOTICE: vsync-failure-limit set to 4 Jan 01 00:00:01.696 5 8 200 imx6x_ipu_init: INFO: i.MX6 chip silicon revision = 0x00630002 Jan 01 00:00:01.697 2 8 200 load_correction_values: fopen: /usr/lib/graphics/iMX6X/csc_gamma.conf: No such file or directory Jan 01 00:00:01.698 2 8 200 load_correction_values: fopen: /usr/lib/graphics/iMX6X/csc_gamma.conf: No such file or directory Jan 01 00:00:01.700 5 8 300 screen: loading EGL display 1... Jan 01 00:00:01.706 5 8 200 gpu-contiguousMB = 64 MB Jan 01 00:00:01.706 5 8 200 gpu-internalPoolMB = 6 MB Jan 01 00:00:01.706 5 8 200 gpu-sharedPoolMB = 2 MB Jan 01 00:00:01.706 5 8 200 gpu-slogUsageInterval = 0 (disabled) Jan 01 00:00:01.706 5 8 200 gpu-powerManagement = 1 Jan 01 00:00:01.706 5 8 200 gpu-gpuProfiler = 0 Jan 01 00:00:01.706 5 8 200 gpu power management is disabled Jan 01 00:00:01.706 5 8 200 gpu-contiguousAbort = false Jan 01 00:00:01.707 5 8 200 gpu-contiguousOnly = true Jan 01 00:00:02.426 2 14 0 Count 0 in 492000000 ns so timestamp clock frequency unknown, defaulting to 125MHz Mempool Map addr range[28100000-2c700000] Mempool Map paddr range[36e00000-3b400000] [Interrupt] Attached irqLine 41 with id 12. [Interrupt] Attached irqLine 42 with id 13. AttacJan 01 00:00:03.078 6 12 100 Receive PULSE_CODE_PROCMGR hed resmgr to /dev/galcore with id:0. Jan 01 00:00:03.079 5 8 300 screen: loading blit module gc320v0... Jan 01 00:00:03.093 5 8 200 HAL user version 4.6.9 build 9754 Feb 22 2014 18:59:31 (4.6.9.p13.qnx32 November 2013) Jan 01 00:00:03.093 5 8 200 HAL kernel version 4.6.9 build 9754 Jan 01 00:00:03.346 5 8 300 screen: loading composition module gc320v0... Jan 01 00:00:03.433 6 12 100 Receive PULSE_CODE_PROCMGR done. Launching devb-umass... done Jan 01 00:00:03.439 5 8 200 imx6x_irq_setup: INFO: Registered handler for IRQ38 for IPU1 port 1 Jan 01 00:00:03.439 5 8 200 imx6x_set_mode: INFO: Configuring HDMI for port 1 Jan 01 00:00:03.451 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.451 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.452 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.452 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.452 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.453 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.453 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.454 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.454 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.454 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.455 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.455 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.455 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.456 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.456 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.457 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.460 2 19 900 devb-umass 1.00A (Feb 22 2014 18:44:33) Jan 01 00:00:03.466 2 5 0 libcam.so (Feb 22 2014 18:44:02) bver 6060109 Jan 01 00:00:03.524 6 12 100 Receive PULSE_CODE_PROCMGR Jan 01 00:00:03.524 6 12 100 Receive PULSE_CODE_PROCMGR # pidin arg pid Arguments 1 procnto-smp-instr -v 2 devc-sermx1 -e -F -S -c80000000 0x021E8000,59 3 slogger 4 pipe 5 i2c-mx35 -p 0x021A0000 -i68 -c66000000 6 i2c-mx35 -p 0x021A4000 -i69 -c66000000 7 i2c-mx35 -p 0x021A8000 -i70 -c66000000 8 devb-mmcsd-mx6q-sabrelite mmcsd ioport=0x02198000,irq=56 blk cache=2M 9 devb-mmcsd-mx6q-sabrelite mmcsd ioport=0x0219C000,irq=57 blk cache=2M 10 devf-norspi-mx6_sabrelite-ecspi 8203 io-audio -d mx-mx6q-sabrelite mixer=input_mux=mic_in 8204 devb-ahci ahci ioport=0x02200000,irq=71 8205 devb-ram ram capacity=16384,nodinit,cache=512k disk name=hd@12 32782 io-pkt-v6-hc -dmx6x 32783 io-usb -c -dehci-mx28 ioport=0x02184300,irq=72,phy=0x020ca000,verbose=5 32784 devb-ram ram capacity=16384,nodinit,cache=512k disk name=hd@10 57361 ksh /proc/boot/.console.sh 57362 slogger2 -U1001:1000 98323 pps -v -l0 -C -t 300000 118804 usblauncher -h -vvvl -p 2 -t -s /lib/dll/pubs/ 122901 sloginfo -wt 135190 dhcp.client 135191 screen 143384 devb-umass cam pnp 143385 devc-pty 167962 qconn port=8000 172059 ksh ksh 176156 pidin arg #