Log

Welcome to QNX Neutrino Initial Program Loader for Freescale i.MX6Q Sabre-Smart (ARM Cortex-A9 MPCore)
SDMMC download...
load image done.
Found image               @ 0x18000008
Jumping to startup        @ 0x10807510
?Welcome to QNX Neutrino 6.6.0 on the i.mx6 Smart-Device (ARM Cortex-A9 MPCore)
Starting watchdog...
Unable to start "wdtkick" (13)
Unable to start "devc-sermx1" (13)
Unable to access "/dev/ser1" (2)
Unable to access "/dev/ser1" (2)
 
Starting I2C1,2,3 driver (/dev/i2c1,2,3)...
Unable to start "i2c-mx35" (13)
Unable to start "i2c-mx35" (13)
Unable to start "i2c-mx35" (13)
Starting SD3 memory card driver...
Unable to start "devb-sdmmc-mx6_generic" (13)
Unable to access "/dev/sd30" (2)
Starting Emmc Nand Flash driver
Unable to start "devb-sdmmc-mx6_generic" (13)
Unable to access "/dev/emmc0" (2)
Starting SD2 memory card driver...
Unable to start "devb-sdmmc-mx6_generic" (13)
Unable to access "/dev/sd20" (2)
Starting SATA driver...
Starting USB host 1 OTG driver (host mode)
Starting Ethernet driver
Path=0 - AHCI (generic)
setting env variables.
Starting Screen Graphics...
Mempool Map addr range[28100000-2c700000]
Mempool Map paddr range[4b600000-4fc00000]
[Interrupt] Attached irqLine 41 with id 5.
[Interrupt] Attached irqLine 42 with id 6.
Attached resmgr to /dev/galcore with id:0.
done.
Launching devb-umass...
done
ksh: No controlling tty (open /dev/tty: No such device or address)
ksh: warning: won't have full job control