Our company IPC using QNX4.25 operating system and licenses all installation, equipped with laser network printer HP P2055dn a (Russian character, no Chinese font).
Now want to use LPD to print a TXT file, the contents of the txt file is russian. But print garbled, and wrap is not correct. If the txt file is English, you can print correctly.
A self-examination of the printer, can play a normal Russian character. Did I have a mistake in setting the QNX? Or I am not configured?
Specific methods are as follows:
1, the normal use of the network card, the Ping printer (set the printer address is 192.168.16.53)
2, /etc/printcap:
#
P2055dn|P2055dn:\
: rm=192.168.16.53:rp=p2055dn:\
: sd=/usr/spool/output/p2055dn:sh=false:
3, /etc/config/lpsrvr:
#
Example LPSRVR configuration file #
#
This example creates a single device # called "/dev/spool/ps.phs" which
Will support multiple Photon print streams # and give them
At a time to # one the physical Postscript printer connected to "/dev/par1".
#
# Use "lpsrvr & -fThisFile" to make it all happen (put in sysinit)
[]
Define QNX name of this print # spooler
# sp=/qnx/PhSpool
Specify where spool files are kept # (lpsrvr will delete them for you)
# cd=/tmp
[Phps]
Use the Postscript Filter and Feed # into Raw Queue
Ta=nullpt
-l1 co=/usr/photon/bin/Pp.ps $(SPFILE) -Pp2055dn /usr/ucb/lpr
[Phpcl]
Use the PCL Filter and Feed # into Raw Queue
Ta=nullpt
Co=/usr/photon/bin/Pp.pcl $(SPFILE) -Pp2055dn /usr/ucb/lpr
[Phpsc]
Use the Postscript Filter and Feed # into Raw Queue
Ta=nullpt
-l1 co=/usr/photon/bin/Pp.ps $(SPFILE) -Pc2025dn /usr/ucb/lpr
[Phpclc]
Use the PCL Filter and Feed # into Raw Queue
Ta=nullpt
Co=/usr/photon/bin/Pp.pcl $(SPFILE) -Pc2025dn /usr/ucb/lpr
[t]
Ta=nullpt
-Pp2055dn co=/usr/ucb/lpr $(SPFILE)
[tfake]
Co=cat "$(SPFILE)" "$(device)" "
Ta=lptl0
[-lptl]
Dv=/dev/par1
[-lptl0]
Dv=/.registry.log
[-nullpt]
Dv=/dev/null
4, running print command
#lpsrvr &
#lpd &
-Pp2055dn /tmp/1.txt #lpr
I don't know that the /etc/config/sysinit.8 settings will also have a impact, I post it all up
/bin/Fsys #Image:
/bin/Fsys.eide Fsys -Ndsk0 -n0=hd0. -n5=cd0. Eide -a1f0 -i14 #Image:
/bin/mount -p /dev/hd0.0 /dev/hd0.0t77 #Image: /
/bin/sinit TERM=qnxm #Image:
NODE=48 #export
KBD=ru_RU_102.kbd export
ABLANG=ru export
TZ=mst-08 M3.5.0/2, M10.5.0/2, export
-l at /bin/rtc
Dev &
Pipe &
-Q -n6 Dev.ansi &
/dev/con1 reopen
-A /dev/console=/dev/con1 prefix
Dev.par &
-n16 Dev.pty &
# /bin/Fsys.floppy -a3f0 -i6
# /cd=/dev/cd0.0 & /bin/Iso9660fsys
# Define the default CD Rom
# /bin/prefix -A /cd=//0/cd0.0
# mount /dev/fd0 /fd/fd0
-P chkfsys /
/bin/mcyr &
-r license
Nameloc &
LPSRVR=/qnx/spooler export
-f1 /etc/config/cfont/unim.f8 cfont
-f0 /etc/config/cfont/vga cfont!.f16
-a -d Mqueue &
LOGNAME=mag export
/etc/netstart
-c -t "-p -f root login" /dev/con1 tinit &
-c -T "-p -f root login" /dev/con[2-6] tinit &



_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post113878
To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com