BSPs and Drivers
/
Wiki
/
TiAm3517EvmNto641ReleaseNotes
/
View Wiki Page
Search Wiki Pages
wiki3951: TiAm3517EvmNto641ReleaseNotes
Release Notes for the QNX Neutrino 6.4.1 BSP for Texas Instruments AM3517 EVM Board
#
Refer to the 1.0.0 release notes
here
View HTML
View PDF
Hide Details
Versions
Associations
Attachments
Back Links
Version
From To
Version Comment
Created By
Version 23
move to 1.0.0
Bert Gemin(deleted)
- 05/26/2010
Version 22
Add USB OTG to driver commands summary. In known issues: change UI board to Application Board and remove USB OTG from unsupported ports.
John McCarthy
- 05/07/2010
Version 21
John McCarthy
- 05/07/2010
Version 20
Reference new am/omap boot resource page instead of duplicating all info here.
Andre Paquette(deleted)
- 04/22/2010
Version 19
Ref 76310: Add note about failure to find ethernet PHY.
Andre Paquette(deleted)
- 04/22/2010
Version 18
Ref 76047 and 76107: Add notes about device problems on USB-OTG.
Andre Paquette(deleted)
- 04/20/2010
Version 17
Change instructions for installing IFS to NAND Flash. Use u-boot instead of serial loader.
Andre Paquette(deleted)
- 04/08/2010
Version 16
Ref # 75999: ethernet driver is now am35xx, not omap35xx and registers as am*, not omap*.
Andre Paquette(deleted)
- 04/08/2010
Version 15
Ref # 75250: Add more updates for ethernet, graphics.
Andre Paquette(deleted)
- 04/07/2010
Version 14
update Ethernet info
Zhen Wang
- 04/07/2010
Version 13
Ref #75292 -- add known issue regarding bogus log from mentor graphics driver.
Andre Paquette(deleted)
- 03/26/2010
Version 12
ditto
Bert Gemin(deleted)
- 03/22/2010
Version 11
updated mmcinit line
Bert Gemin(deleted)
- 03/22/2010
Version 10
changed mmc init to mmcinit.
Bert Gemin(deleted)
- 03/22/2010
Version 9
Ref # 75252: Add notes about warnings from ethernet driver.
Andre Paquette(deleted)
- 03/19/2010
Version 8
Ref #75227: Add comment regarding MMC2 interface not supporting some SD cards.
Andre Paquette(deleted)
- 03/10/2010
Version 7
REF 74458 Change release notes to match processor name correction in BSP.
Andre Paquette(deleted)
- 02/23/2010
Version 6
Ref #74460: Add a section describing how to install the IPL for the 3517.
Andre Paquette(deleted)
- 02/18/2010
Version 5
Reference # 74459: Change board version name and raw file name from 3530 to 3517.
Andre Paquette(deleted)
- 02/16/2010
Version 4
Zhen Wang
- 12/03/2009
Version 3
Zhen Wang
- 12/03/2009
Version 2
Add CAN, NAND, RTC and DMA support
Zhen Wang
- 12/03/2009
Version 1
create
Bert Gemin(deleted)
- 10/22/2009
Compare