TeamForge : Post

Forum Topic - about CAN card driver: (5 Items)

View: as

di hu

10/20/2009 4:41 AM

post40306

hello, I want to develope a PCI bus CAN card driver. where could get the example driver? and some introduction about PCI
 Card driver develope.
Thank you!

Andrew Boyd(deleted)

10/20/2009 9:38 AM

post40325

RE: about CAN card driver

> I want to develop a PCI bus CAN card driver 

Does it have to be PCI?

I think people here have a CANBUS-to-USB
adapter running under QNX.

Would that do what you want?  You don't have
to write any software to make that work, just
get the canbus-to-usb adapter, which I don't
think was very expensive..

--
aboyd  www.poweredbyqnx.com/movies/L39_form.wmv

di hu

10/21/2009 1:50 AM

post40392

Re: RE: about CAN card driver

Yes
I want to use the PCI CAN Card

if anyone have the PCI CAN Card driver that good 

Our system cannot use the CAN-USB adopter, because it is not real-time, and communicate with the other device by USB, I 
think it is not a  good idea.

thank you!

Andrew Boyd(deleted)

10/21/2009 9:41 AM

post40421

RE: RE: about CAN card driver

> I want to use the PCI CAN Card

ok, it was worth a shot - CANBUS isn't exactly
high-bandwidth  :)

I would recommend seeing what documentation
(registers etc) you can dig up, and perhaps 
a sample source driver for another OS for this 
card.

Then, look at how memory is mapped in QNX, and
interrupts are handled - both ridiculously easy,
look at any QNX driver source on the foundry - 
and that's probably about all you need.

--
aboyd

di hu

10/22/2009 10:23 PM

post40579

RE: RE: about CAN card driver

thank you! I found a card from steinhoff company.
so I donnot need to develop the driver.
 
the next step, I must learn to how to use it.

--- 09年10月21日，周三, Andrew Boyd <community-noreply@qnx.com> 写道：


发件人: Andrew Boyd <community-noreply@qnx.com>
主题: RE: RE: about CAN card driver
收件人: "ionetmig-networking" <post40421@community.qnx.com>
日期: 2009年10月21日,周三,下午9:41



> I want to use the PCI CAN Card

ok, it was worth a shot - CANBUS isn't exactly
high-bandwidth  :)

I would recommend seeing what documentation
(registers etc) you can dig up, and perhaps 
a sample source driver for another OS for this 
card.

Then, look at how memory is mapped in QNX, and
interrupts are handled - both ridiculously easy,
look at any QNX driver source on the foundry - 
and that's probably about all you need.

--
aboyd




_______________________________________________

io-net migration
http://community.qnx.com/sf/go/post40421




      ___________________________________________________________ 
  好玩贺卡等你发，邮箱贺卡全新上线！ 
http://card.mail.cn.yahoo.com/

Return