|
Re: BSP 6.5SP1 to 6.5 port
|
02/03/2020 4:14 AM
post120216
|
Re: BSP 6.5SP1 to 6.5 port
Hi Ralph,
if the BSP is supplied by Adlink, I suggest to contact them if a downgrade is possible and at what cost.
The other option is to use the SP1 BSP supplied by Adlink, enjoy their support, and bring your application forward to
SP1. This would give you a mucher better maintainable solution in the mid and long term.
Looking at the Adlink platform you mentioned, it's based on Baytrail SoC and Intel i210 network controllers, and getting
this to work on 6.5.0 will probably cause a lot of headache.
Regards,
Albrecht
|
|
|