Core Development Tools/Discussion/General/GCC 4.5 available for QNX/List of Posts
 
Forum Topic - GCC 4.5 available for QNX: (11 Items)
   
Update
Marcus Bortel(deleted)
04/04/2011 4:16 AM
post84546
GCC 4.5 available for QNX   
Hello All,

does someone know when gcc 4.5 will be available for QNX?

Best regards,
Marcus Bortel 

Marcus Bortel

Pan European Field Application Engineer

________________________________________________________________________
_____

QNX Software Systems Management GmbH
Am Listholze 76
D-30177 Hannover
Germany
Tel: +49-511-94091-442
Fax: +49-511-94091-199
Email: mbortel <mailto:mbortel@qnx.de>; @qnx.de
http://www.qnx.com <http://www.qnx.com/>;  
A subsidiary of Research in Motion Limited
_______________________________________
QNX Software Systems Management GmbH
Sitz der Gesellschaft: Hannover - Registergericht: Hannover HRB 57203
Geschaeftsfuehrer: Norbert Struck - Michael Michalyshyn - Brian Bidulka
- James Yersh - Roger Witteveen

Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese
E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den
Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die
unbefugte Weitergabe dieser Mail ist nicht gestattet. 

This e-mail may contain confidential and/or privileged information. If
you are not the intended recipient (or have received this e-mail in
error) please notify the sender immediately and delete this e-mail. Any
unauthorized copying, disclosure or distribution of the contents in this
e-mail is strictly forbidden.
Ryan Mansfield(deleted)
04/04/2011 9:45 AM
post84565
Re: GCC 4.5 available for QNX   
On 11-04-04 04:16 AM, Marcus Bortel wrote:
> Hello All,
>
> does someone know when gcc 4.5 will be available for QNX?

There will be an update to the toolchain (gcc, binutils and gdb) in the 
next SDP release. There will be experimental versions available on the 
foundry before the release.

Regards,

Ryan Mansfield
Niklas Angare
04/15/2011 3:07 PM
post85066
Re: GCC 4.5 available for QNX   
I'm looking forward to the improved C++0x support as well as the improved debugging with GCC 4.5+ and GDB 7.2.

If the next SDP release is more than three months from now I think I'll be disappointed if it doesn't come with GCC 4.6.
1, which will probably have been released by then.
Andreas Beschorner(deleted)
05/23/2011 8:03 AM
post86046
Re: GCC 4.5 available for QNX   
Greetings all,

any news on gcc 4.5 and Momentix 6.5.xxx? I would really need lambda expressions implemented and hope they are available
 asap...

Thanks for information,
Andy
bogdan celer
05/24/2011 4:53 AM
post86064
Re: GCC 4.5 available for QNX   
Andreas I have compiled under QNX 6.5.0 new versions of gcc, gcc-4.5, gcc 4.6.1 and gcc 7.0.
For now I'm having trouble with the gnat compiler. Therefore, not yet added a new compiler on my page www.ajam.org.pl. 
If you want to do test c, c++, fortran, objc, objc++ from one of these compilers please contact with me.
bogdan
Andreas Beschorner(deleted)
06/22/2011 9:20 AM
post86774
Re: GCC 4.5 available for QNX   
Greetings mate,

I would like to give gcc 4.6.0 a shot (and I hope that the QNX dev team will asap publish a working toolchain). I do 
just need to compile c and c++ and would be thrilled to be given an opportunity for testing. I will check your homepage 
to get in touch with you, hoping I will find an email address there.

Atb,
Andy
bogdan celer
06/24/2011 5:11 PM
post86847
Re: GCC 4.5 available for QNX   
Now I made the compiler gcc4.5.3/g++4.5.3 and GNAT GPL2011 available on my website www.ajam.org.pl.
Now I prepare the compiler in the version 4.6.1  for QNX
bogdan
bogdan celer
07/12/2011 1:36 PM
post87281
Re: GCC 4.5 available for QNX   
On www.ajam.org.pl I put gcc compiler based on Foundary72 sources in the version 4.6.1. 
There are compilers c++, ada, objc, objc++ and fortran in the version 4.6.1
Andreas Beschorner(deleted)
07/20/2011 4:32 AM
post87460
Re: GCC 4.5 available for QNX   
Wow, thanks a lot! I will immediately check your site out and try to get it running in my company.

Atb,
Andy
Zahira Ammarguellat
04/03/2012 2:18 PM
post92424
Re: GCC 4.5 available for QNX   
Bogdan,

How do you do to keep the same environment 6.5.0 and use a newer version of gcc? I am using currently the gcc4.4.2 the 
version that came with the 6.5.0 package but would like to update to a newest version of gcc. I have found on Foundry27 
a tar file for nto-gcc-4.6.2 but don't know how to "hook" it to the 6.5.0 environment?
Thanks,

-Zahira
Niklas Angare
04/03/2012 3:02 PM
post92426
Re: GCC 4.5 available for QNX   
> How do you do to keep the same environment 6.5.0 and use a newer version of 
> gcc? 

After installation, you can for example compile for x86 with GCC 4.6.2 with:
QCC -V4.6.2,gcc_ntox86

You can add -set-default to the above to set it as the default. See the documentation for QCC.

To install, see the posts by Ryan Mansfield here:
http://community.qnx.com/sf/discussion/do/listPosts/projects.toolchain/discussion.core_development_tools.topc20625

Return