TeamForge : Post

Forum Topic - 2 ETHNERNET BOARD CONFIGURATION SWAPPING: (4 Items)

View: as

JERONIMO SANCHEZ DE LA VEGA

10/22/2009 1:41 PM

post40518

2 ETHNERNET BOARD CONFIGURATION SWAPPING

I have an embedded PC with two ethernet interfaces, one in the own CPU and the other in a standard ethernet board, over 
a PCI bus. Both boards work properly but in some HW its configuration is swapped.
How could assign a configuration to each en0 or en1 boards?

Thanks

Andrew Boyd(deleted)

10/22/2009 4:50 PM

post40551

RE: 2 ETHNERNET BOARD CONFIGURATION SWAPPING

For the interface you want as en0, start
it's driver first.

If the same driver is used for both, use
the pci=X option.

--
aboyd

JERONIMO SANCHEZ DE LA VEGA

10/27/2009 4:05 AM

post40734

Re: RE: 2 ETHNERNET BOARD CONFIGURATION SWAPPING

Thanks Andrew, at last I test :
io-net -d rtl did=0x8139,vid=0x10ec,pci=0x1 \ -d rtl did=0x8139,vid=0x10ec,pci=0x0 -p tcpip

and it works fine.

Andrew Boyd(deleted)

10/27/2009 9:25 AM

post40770

RE: RE: 2 ETHNERNET BOARD CONFIGURATION SWAPPING

:-)

--
aboyd

Return