Hi,

we are using QNX Neutrino 6.4.1.

In a configuration we have 10 network interfaces.  They consist of:
2 NICs on the motherboard (did 0x1096), and two quad mezzanines (did 0x10bc).
We use the e1000 driver for all NICs.

In this configuration we see lots of:

Memory Allocation Failures on Receive

errors in the nicinfo output on NICs on one of the NICs on the
second mezzanine.

Working with only one mezzanine (i.e. 2+4 NICs) everything works fine.

Any idea why we get these allocation failures?

Regards,
Peter Engstrom