TeamForge : Post

Forum Topic - How do you build traceprinter for non-Neutrino hosts ?: (4 Items)

View: as

Dave Bott(deleted)

02/04/2009 1:13 PM

post21437

How do you build traceprinter for non-Neutrino hosts ?

Customer has the traceprinter source and wants to build it on a Linux box.

There are Makefiles there for Linux, Windows and Solaris, but it is not clear to me how we expect these to work on these
 hosts.

Since we release host versions of traceprinter, clearly we've done it.

Any advice on how ?

Thanks !

Dave

Dave Bott(deleted)

02/06/2009 8:12 PM

post21695

Re: How do you build traceprinter for non-Neutrino hosts ?

No takers ? I'll have to try it myself I suppose. This could use an app. note...

Dave

Colin Burgess

02/06/2009 8:18 PM

post21696

RE: How do you build traceprinter for non-Neutrino hosts ?

The trick, Dave, is to setup a linux staging area in your qconf-override.mk
 
USE_ROOT_linux=/home/cburgess/qssl/linux_stage
 
Then you can build and install libtraceparser and traceprinter (and any other
libs needed)

________________________________

From: Dave Bott [mailto:community-noreply@qnx.com]
Sent: Fri 2/6/2009 8:12 PM
To: general-ide
Subject: Re: How do you build traceprinter for non-Neutrino hosts ?



No takers ? I'll have to try it myself I suppose. This could use an app. note...

Dave

_______________________________________________
General
http://community.qnx.com/sf/go/post21695

Dave Bott(deleted)

02/06/2009 11:31 PM

post21700

RE: How do you build traceprinter for non-Neutrino hosts ?

Thanks Colin,
 
Actually, it turns out there's  more to it...
 
First, silly old Linux (FC 6) did not install gcc by default - so that was confusing my poor brain.
 
Then, traceparser requires our lib/compat.h which does not seem to be installed by default.
 
Then, libtraceparser.a is also required.

Oh, and libcompat.a as well.
 
Easy. 
 
Thanks !
 
Dave

________________________________

From: Colin Burgess [mailto:community-noreply@qnx.com]
Sent: Fri 2/6/2009 5:18 PM
To: general-ide
Subject: RE: How do you build traceprinter for non-Neutrino hosts ?



The trick, Dave, is to setup a linux staging area in your qconf-override.mk

USE_ROOT_linux=/home/cburgess/qssl/linux_stage

Then you can build and install libtraceparser and traceprinter (and any other
libs needed)

________________________________

From: Dave Bott [mailto:community-noreply@qnx.com]
Sent: Fri 2/6/2009 8:12 PM
To: general-ide
Subject: Re: How do you build traceprinter for non-Neutrino hosts ?



No takers ? I'll have to try it myself I suppose. This could use an app. note...

Dave

_______________________________________________
General
http://community.qnx.com/sf/go/post21695





_______________________________________________
General
http://community.qnx.com/sf/go/post21696

Attachment:

winmail.dat 4.78 KB

Return