TeamForge : Post

Forum Topic - Momentics Target Connection: (5 Items)

View: as

Mark Welsh

04/14/2008 6:02 AM

post6717

Hi,

I am having problems connecting my momentics IDE to an X86 target. I have qconn running on the target, which is also my 
host PC - I am running QnX under vmware. I can ping from the QnX machine to my host PC and vice versa so I know the 
network connection is OK.

Whenever I try to create a new target and connect I get the following error:

java.net.SocketException: Software caused connection abort: connect

Any ideas what I am doing wrong.

Mark.

Andy Jin(deleted)

04/14/2008 9:33 AM

post6725

Re: Momentics Target Connection

Did you make sure "qconn" starts up at the same TCP port as the one you put in when you created a new target connnection
. The default is port "8000".

Also did you use the IP address of your NTO VM? If you use name instead of IP address you need to ensure it can be 
resolved to the correct IP address.

Mark Welsh

04/14/2008 1:41 PM

post6747

Re: Momentics Target Connection

Hi Andy,

Thanks for your quick reply.

Yes I am using the default port for both target and
host (not specifying on the target and I understand
from the docs the default is then 8000) and I am using
the IP address in both cases and not the name.

Thanks.

Mark.

--- Andy Jin <ajin@qnx.com> wrote:

> Did you make sure "qconn" starts up at the same TCP
> port as the one you put in when you created a new
> target connnection. The default is port "8000".
> 
> Also did you use the IP address of your NTO VM? If
> you use name instead of IP address you need to
> ensure it can be resolved to the correct IP address.
> 
> 
> _______________________________________________
> QNX Momentics Community Support
> http://community.qnx.com/sf/go/post6725
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Elena Laskavaia

04/14/2008 2:14 PM

post6749

Re: Momentics Target Connection

can you run telnet on this port?
telnet targetIP 8000

do you have firewall or something that may block this access?

Mark Welsh wrote:
>
> Hi Andy,
>
> Thanks for your quick reply.
>
> Yes I am using the default port for both target and
> host (not specifying on the target and I understand
> from the docs the default is then 8000) and I am using
> the IP address in both cases and not the name.
>
> Thanks.
>
> Mark.
>
> --- Andy Jin <ajin@qnx.com> wrote:
>
> > Did you make sure "qconn" starts up at the same TCP
> > port as the one you put in when you created a new
> > target connnection. The default is port "8000".
> >
> > Also did you use the IP address of your NTO VM? If
> > you use name instead of IP address you need to
> > ensure it can be resolved to the correct IP address.
> >
> >
> > _______________________________________________
> > QNX Momentics Community Support
> > http://community.qnx.com/sf/go/post6725
> >
> >
>
>
>
>       
>
____________________________________________________________________________
________ 
>
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.  
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>
> _______________________________________________
> QNX Momentics Community Support
> http://community.qnx.com/sf/go/post6747
>

Mark Welsh

04/15/2008 7:18 AM

post6777

Re: Momentics Target Connection

That works fine. Seems to be a conflict on my
firewall. Since its working on a different network.

Thanks,

Mark.


--- Elena Laskavaia <elaskavaia@qnx.com> wrote:

> can you run telnet on this port?
> telnet targetIP 8000
> 
> do you have firewall or something that may block
> this access?
> 
> Mark Welsh wrote:
> >
> > Hi Andy,
> >
> > Thanks for your quick reply.
> >
> > Yes I am using the default port for both target
> and
> > host (not specifying on the target and I
> understand
> > from the docs the default is then 8000) and I am
> using
> > the IP address in both cases and not the name.
> >
> > Thanks.
> >
> > Mark.
> >
> > --- Andy Jin <ajin@qnx.com> wrote:
> >
> > > Did you make sure "qconn" starts up at the same
> TCP
> > > port as the one you put in when you created a
> new
> > > target connnection. The default is port "8000".
> > >
> > > Also did you use the IP address of your NTO VM?
> If
> > > you use name instead of IP address you need to
> > > ensure it can be resolved to the correct IP
> address.
> > >
> > >
> > > _______________________________________________
> > > QNX Momentics Community Support
> > > http://community.qnx.com/sf/go/post6725
> > >
> > >
> >
> >
> >
> >       
> >
>
____________________________________________________________________________
> ________ 
> >
> > Be a better friend, newshound, and
> > know-it-all with Yahoo! Mobile.  Try it now.  
> >
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> >
> > _______________________________________________
> > QNX Momentics Community Support
> > http://community.qnx.com/sf/go/post6747
> >
> 
> _______________________________________________
> QNX Momentics Community Support
> http://community.qnx.com/sf/go/post6749
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Return