TeamForge : Post

Forum Topic - Ethernet support in QX4.24: (16 Items)

View: as

kanda samy

08/06/2009 7:13 AM

post35351

I am using QNX4.24, I need to know whether ethernet and usb support is available. If so how to configure?

Kindly anyone help in this regard.



Regards,
K.Kandasamy.

Hugh Brown(deleted)

08/06/2009 7:55 AM

post35354

RE: Ethernet support in QX4.24

What Ethernet adapter do you have? You have to run a specific Ethernet
driver against the hardware. First of all you have to run 'Net',
followed by a network driver (eg. Net.ether1000), but I need to know
what network adapter you have, so that I can tell you what driver to
run. If it is a PCI adapter, then you can post the output from 'show_pci
-v'.

As far as I know, there is no USB support under 4.24, this came with
4.25, but there is a patch on our web site which may work with 4.24.


-----Original Message-----
From: kanda samy [mailto:community-noreply@qnx.com] 
Sent: Thursday, August 06, 2009 7:14 AM
To: qnx4-community
Subject: Ethernet support in QX4.24

I am using QNX4.24, I need to know whether ethernet and usb support is
available. If so how to configure?

Kindly anyone help in this regard.



Regards,
K.Kandasamy.



_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post35351

kanda samy

08/06/2009 8:21 AM

post35357

Re: RE: Ethernet support in QX4.24

thanks for your quick reply.

I have to check the adapter type. we are using MIC3358 A processor with inel 845E chipset. 

kindly tell the website for usb driver support for QNX4.24 so that I can make use of it.



regards,
K.Kandasamy

Hugh Brown(deleted)

08/06/2009 8:26 AM

post35358

RE: RE: Ethernet support in QX4.24

www.qnx.com. You will have to go to the downloads section and QNX RTOS
4.x.

-----Original Message-----
From: kanda samy [mailto:community-noreply@qnx.com] 
Sent: Thursday, August 06, 2009 8:22 AM
To: qnx4-community
Subject: Re: RE: Ethernet support in QX4.24

thanks for your quick reply.

I have to check the adapter type. we are using MIC3358 A processor with
inel 845E chipset. 

kindly tell the website for usb driver support for QNX4.24 so that I can
make use of it.

regards,
K.Kandasamy

_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post35357

kanda samy

08/06/2009 11:48 PM

post35428

Re: RE: RE: Ethernet support in QX4.24

I had check the download section of QNX 4.x in that USB driver for QNX4.25 only available not for QNX4.24.

kindly tell which section I have check.

Hugh Brown(deleted)

08/07/2009 7:56 AM

post35439

RE: RE: RE: Ethernet support in QX4.24

Yes, I said that there was USB available under 4.25, but it should work
under 4.24. Give it a try.

-----Original Message-----
From: kanda samy [mailto:community-noreply@qnx.com] 
Sent: Thursday, August 06, 2009 11:48 PM
To: qnx4-community
Subject: Re: RE: RE: Ethernet support in QX4.24

I had check the download section of QNX 4.x in that USB driver for
QNX4.25 only available not for QNX4.24.

kindly tell which section I have check.

_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post35428

kanda samy

08/11/2009 1:24 AM

post35638

RE: Ethernet support in QX4.24

Hello Mr.Hugh Brown,

thanks for ur replies.....

Today only I got installed QNX4.24 in my system. I check the show_pci() as u said.
It show the network device as ethernet.

kindly tell how to configure?

regarding USB, i not yet checked.

kanda samy

08/11/2009 2:01 AM

post35639

Re: RE: Ethernet support in QX4.24

I had forget to include in the previous post that I had run the Net.ether1000 command but it display the following error
.

Net.ether1000 INITIALIZATION ERROR 10     Net.ether1000 INITIALIZATION ERROR 04

Kindly tell me that any configuration have to done before running this command..



Regards,
K.Kandasamy.

Hugh Brown(deleted)

08/11/2009 7:52 AM

post35655

RE: RE: Ethernet support in QX4.24

I need to know what Ethernet adapter you have in your machine. What is
the vendor and device ID of the Ethernet device shown in the show_pci
output?

-----Original Message-----
From: kanda samy [mailto:community-noreply@qnx.com] 
Sent: Tuesday, August 11, 2009 2:01 AM
To: qnx4-community
Subject: Re: RE: Ethernet support in QX4.24

I had forget to include in the previous post that I had run the
Net.ether1000 command but it display the following error.

Net.ether1000 INITIALIZATION ERROR 10     Net.ether1000 INITIALIZATION
ERROR 04

Kindly tell me that any configuration have to done before running this
command..

Regards,
K.Kandasamy.

_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post35639

kanda samy

08/11/2009 8:11 AM

post35659

Re: RE: RE: Ethernet support in QX4.24

thanks for ur reply again..

Its realtek's one.

Vendor Id - 10ech
device - 8169

I had gone through your posting in the below path. if i copy the Net.rtl8169 give solution to my problem..

http://community.qnx.com/sf/discussion/do/listPosts/projects.community/discussion.qnx4_community_support.topc2364


Thanks Regards,
K.kandasamy.

Hugh Brown(deleted)

08/11/2009 8:13 AM

post35660

RE: RE: RE: Ethernet support in QX4.24

OK, good.


-----Original Message-----
From: kanda samy [mailto:community-noreply@qnx.com] 
Sent: Tuesday, August 11, 2009 8:11 AM
To: qnx4-community
Subject: Re: RE: RE: Ethernet support in QX4.24

thanks for ur reply again..

Its realtek's one.

Vendor Id - 10ech
device - 8169

I had gone through your posting in the below path. if i copy the
Net.rtl8169 give solution to my problem..

http://community.qnx.com/sf/discussion/do/listPosts/projects.community/d
iscussion.qnx4_community_support.topc2364


Thanks Regards,
K.kandasamy.



_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post35659

kanda samy

08/11/2009 8:37 AM

post35666

Re: RE: RE: RE: Ethernet support in QX4.24

Actually I not tried. I am asking U whether  it will provide the solution?


kind Regards,
K.Kandasamy.

Hugh Brown(deleted)

08/11/2009 8:46 AM

post35669

RE: RE: RE: RE: Ethernet support in QX4.24

Yes, that is the correct driver for your device.

-----Original Message-----
From: kanda samy [mailto:community-noreply@qnx.com] 
Sent: Tuesday, August 11, 2009 8:37 AM
To: qnx4-community
Subject: Re: RE: RE: RE: Ethernet support in QX4.24

Actually I not tried. I am asking U whether  it will provide the
solution?

kind Regards,
K.Kandasamy.

_______________________________________________

QNX4 Community Support
http://community.qnx.com/sf/go/post35666

kanda samy

08/17/2009 5:55 AM

post36075

Re: RE: RE: RE: RE: Ethernet support in QX4.24

I check with the usb driver for 4.25 but while running Fsys.umass it display the following message.

umass _sim_attach: usbd_connect - No such file or directory

No Adaptors Found


Kindly reply regarding this issue...



Regards,
K.Kandasamy.

kanda samy

08/18/2009 4:48 AM

post36138

Re: RE: RE: RE: RE: Ethernet support in QX4.24

I have tried the following commands

io-usb -dehci pindex=0, verbose=4, pindex=2 &
io-usb -dohci pindex=0, verbose=4, pindex=2 &
io-usb -duhci pindex=0, verbose=4, pindex=2 &

---->It create file in /dev/usb. 

Fsys.umass fsys -l -n Direct-Access=usb
mount -p /dev/usb

But it dispay,
mount -p: read() of BIOS signature on /dev/usb failed: Block device required

kindly reply in this regard....

kanda samy

08/18/2009 7:04 AM

post36142

Re: RE: RE: RE: RE: Ethernet support in QX4.24

I had note that the usb is when ever I type the command 

mount -p /dev/usb


Kindly help in this regard..

Return