Community/Discussion/QNX4 Community Support (EOL)/Fsys.atapi problem/List of Posts
 
Forum Topic - Fsys.atapi problem:
   
Update
Leonid Khait(deleted)
07/19/2008 4:30 AM
post10767
Fsys.atapi problem   
I have problem to support Serial ATA Hard disk with Fsys.atapi at Intel 82801 EB Chipset Controller.

CD-RW connected to first IDE Port looks like Master at the first IDE Port.
 
Serial ATA Hard Disk connected to first SATA Port and looks like Master at the second IDE Port.

In BIOS On-Chip Serial ATA setting is [AUTO].

Only 
Fsys.atapi atapi ioport=0x1f0,irq=15,master=atapi 
support CD-RW properly.

Fsys.atapi atapi ioport=0x170,irq=14 - hangs computer.

I can work with HD only with Fsys.eide driver.
Leonid Khait(deleted)
07/31/2008 1:45 AM
post11269
Re: Fsys.atapi problem   
Sorry, I have to write:

Only 

Fsys.atapi atapi ioport=0x1f0,irq=14,master=atapi 

support CD drive properly. 

Fsys.atapi atapi ioport=0x170,irq=15 - hangs computer. 

I can work with HD only with Fsys.eide driver.
Hugh Brown(deleted)
08/11/2008 10:43 AM
post11626
RE: Fsys.atapi problem   
Please can you supply the following information:

show_pci -vvv, traceinfo, sin ver, sin ir, description of BIOS
configuration and device configuration.

-----Original Message-----
From: Leonid Khait [mailto:community-noreply@qnx.com] 
Sent: Thursday, July 31, 2008 1:46 AM
To: qnx4-community
Subject: Re: Fsys.atapi problem

Sorry, I have to write:

Only 

Fsys.atapi atapi ioport=0x1f0,irq=14,master=atapi 

support CD drive properly. 

Fsys.atapi atapi ioport=0x170,irq=15 - hangs computer. 

I can work with HD only with Fsys.eide driver.

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post11269
Hugh Brown(deleted)
08/11/2008 7:36 AM
post11611
RE: Fsys.atapi problem   
Please can you post the output from 'show_pci -v'.


-----Original Message-----
From: Leonid Khait [mailto:lhait@diaspro.com] 
Sent: Saturday, July 19, 2008 4:31 AM
To: qnx4-community
Subject: Fsys.atapi problem

I have problem to support Serial ATA Hard disk with Fsys.atapi at Intel
82801 EB Chipset Controller.

CD-RW connected to first IDE Port looks like Master at the first IDE
Port.
 
Serial ATA Hard Disk connected to first SATA Port and looks like Master
at the second IDE Port.

In BIOS On-Chip Serial ATA setting is [AUTO].

Only 
Fsys.atapi atapi ioport=0x1f0,irq=15,master=atapi 
support CD-RW properly.

Fsys.atapi atapi ioport=0x170,irq=14 - hangs computer.

I can work with HD only with Fsys.eide driver.



_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post10767
Leonid Khait(deleted)
08/17/2008 11:45 PM
post11916
Re: RE: Fsys.atapi problem   
I put all outputs to info.rar archive.

Thank you
Attachment: Text info.rar 4.6 KB
Hugh Brown(deleted)
08/18/2008 10:54 AM
post11954
RE: RE: Fsys.atapi problem   
The correct values for the ioport anf irq are as follows:

Fsys.atapi atapi ioport=0x1f0,irq=14
Fsys.atapi atapi ioport=0x170,irq=15

You should only need to specify these if you are starting multiple
drivers.


-----Original Message-----
From: Leonid Khait [mailto:community-noreply@qnx.com] 
Sent: Sunday, August 17, 2008 11:45 PM
To: qnx4-community
Subject: Re: RE: Fsys.atapi problem

I put all outputs to info.rar archive.

Thank you

_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post11916

Return