|
09/04/2014 9:45 AM
post111629
|
Hi !! I installed QNX4 using the QNX Product Suite 2011 CD and everything was fine, I installed the licenses of QNX and
TCP/IP. on /etc/hosts I put the IP Adress for the machine and the name of the machine, I set up the /etc/netstart file,
I load the Net, the network driver, etc, and everything fine. But I can´t conect from or to the machine in the network.
If I ping the IP Adress of the machine I got answer, but if I ping a IP Adress of another machine on the local network,
I didn´t have answer. Please any help will be welcome. Thanks....
|
|
|
|
|
|
09/04/2014 9:59 AM
post111630
|
Hi Victor,
Please, send me output following commands:
sin in
sin ar
sin ver
sin ti
sin ir
licinfo -a
ifconfig -a
netstat -rn
ping <IP Adress of another machine on the local network>
Respectfully,
Oleg
04 сент. 2014 г., в 17:45:43, Victor Gamboa <community-noreply@qnx.com> написал:
> Hi !! I installed QNX4 using the QNX Product Suite 2011 CD and everything was fine, I installed the licenses of QNX
and TCP/IP. on /etc/hosts I put the IP Adress for the machine and the name of the machine, I set up the /etc/netstart
file, I load the Net, the network driver, etc, and everything fine. But I can´t conect from or to the machine in the
network. If I ping the IP Adress of the machine I got answer, but if I ping a IP Adress of another machine on the local
network, I didn´t have answer. Please any help will be welcome. Thanks....
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post111629
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
|
|
|
|
|
|
09/04/2014 11:13 AM
post111631
|
Hi Oleg ! Good to know about you !! I attach the outputs you requested. Thanks for the help....
Well I can´t make multiple attachments, so I will reply several times for each otuput....
|
|
|
|
|
|
09/04/2014 11:14 AM
post111632
|
|
|
|
|
|
|
09/04/2014 11:14 AM
post111633
|
|
|
|
|
|
|
09/04/2014 11:14 AM
post111634
|
|
|
|
|
|
|
09/04/2014 11:15 AM
post111635
|
|
|
|
|
|
|
09/04/2014 11:15 AM
post111636
|
|
|
|
|
|
|
09/04/2014 11:15 AM
post111637
|
|
|
|
|
|
|
09/04/2014 11:16 AM
post111638
|
|
|
|
|
|
|
09/04/2014 11:16 AM
post111639
|
|
|
|
|
|
|
09/04/2014 5:58 PM
post111641
|
Oleg I attach the outputs on txt
|
|
|
|
|
|
09/04/2014 5:58 PM
post111642
|
|
|
|
|
|
|
09/04/2014 5:59 PM
post111643
|
|
|
|
|
|
|
09/04/2014 5:59 PM
post111644
|
|
|
|
|
|
|
09/04/2014 5:59 PM
post111645
|
|
|
|
|
|
|
09/04/2014 5:59 PM
post111646
|
|
|
|
|
|
|
09/04/2014 6:00 PM
post111647
|
|
|
|
|
|
|
09/04/2014 6:00 PM
post111648
|
|
|
|
|
|
|
09/04/2014 6:00 PM
post111649
|
|
|
|
|
|
|
09/04/2014 6:00 PM
post111650
|
|
|
|
|
|
|
09/05/2014 4:36 AM
post111654
|
Hi Victor,
Try to start Net.rtl8169 network driver without arguments. To do this edit sysinit and restart PC.
> Well I can´t make multiple attachments, so I will reply several times for each otuput....
You can store all diagnostics files to one archive and attach it.
Respectfully,
Oleg
05 сент. 2014 г., в 2:00:48, Victor Gamboa <community-noreply@qnx.com> написал:
> sin ver
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post111650
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
> <sinver.txt>
|
|
|
|
|
|
09/05/2014 9:40 AM
post111658
|
Oleg I put the Net.rtl8169 without arguments on the /etc/config/sysinit.1 file, reset the machine but I still can´t
ping another machine on the local network. Any suggestions ?
|
|
|
|
|
|
09/05/2014 12:46 PM
post111659
|
Does the MAC address in your /etc/config/netmap file match the MAC address
of your RTL 8169 adapter? If not, then edit the /etc/config/netmap file
and correct the MAC address. Then reboot your machine.
On 2014/9/5, 9:40 AM, "Victor Gamboa" <community-noreply@qnx.com> wrote:
>Oleg I put the Net.rtl8169 without arguments on the /etc/config/sysinit.1
>file, reset the machine but I still can´t ping another machine on the
>local network. Any suggestions ?
>
>
>
>_______________________________________________
>
>QNX4 Community Support
>http://community.qnx.com/sf/go/post111658
>To cancel your subscription to this discussion, please e-mail
>qnx4-community-unsubscribe@community.qnx.com
|
|
|
|
|
|
09/05/2014 1:09 PM
post111660
|
Hi Hugh ! Thanks for the help....
I update the /etc/config/netmap with the MAC Address of the Card (it wasn´t equal) but still can´t ping another
machine. I disabled the network adapter on BIOS and I added a network card on a pci slot, I checked the MAC Adress of
the new card on /etc/config/netmap, but it still don´t work.
What can I do ?
|
|
|
|
|
|
09/05/2014 1:15 PM
post111661
|
Are you pinging from one QNX4 machine to another QNX4 machine? If so, does
the destination machine have the correct MAC addresses in its netmap file?
If you run Œarp -a¹ on the destination machine, do you see the MAC address
of the machine from which you are pinging?
On 2014/9/5, 1:09 PM, "Victor Gamboa" <community-noreply@qnx.com> wrote:
>Hi Hugh ! Thanks for the help....
>I update the /etc/config/netmap with the MAC Address of the Card (it
>wasn´t equal) but still can´t ping another machine. I disabled the
>network adapter on BIOS and I added a network card on a pci slot, I
>checked the MAC Adress of the new card on /etc/config/netmap, but it
>still don´t work.
>What can I do ?
>
>
>
>_______________________________________________
>
>QNX4 Community Support
>http://community.qnx.com/sf/go/post111660
>To cancel your subscription to this discussion, please e-mail
>qnx4-community-unsubscribe@community.qnx.com
|
|
|
|
|
|
09/05/2014 1:36 PM
post111662
|
Yes I am pinging from a qnx machine to anoter qnx machine. If I tried to telnet (from a telnet client on a windows
machine) to the qnx machine with problems, I can´t access. If I telnet to the other working qnx machine I don´t have
problems. And with arp -a on the destination machine I can´t see the qnx machine where i was pinging.
|
|
|
|
|
|
09/05/2014 1:40 PM
post111663
|
The arp -a output on the qnx machine with problems is:
node1 (192.168.1.50) at 00:14:d1:25:13:6a permanent
I don´t know if this could say something.
|
|
|
|
|
|
09/05/2014 1:53 PM
post111664
|
Victor,
Can you send me output following commands (from both working and problem QNX4 machines)?
netmap
netinfo -l
Also check that you set different node ID on both machines.
Respectfully,
Oleg
05 сент. 2014 г., в 21:40, Victor Gamboa <community-noreply@qnx.com> написал:
> The arp -a output on the qnx machine with problems is:
>
> node1 (192.168.1.50) at 00:14:d1:25:13:6a permanent
>
> I don´t know if this could say something.
>
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post111663
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
|
|
|
|
|
|
09/05/2014 7:05 PM
post111666
|
Oleg, I attach the file with the outputs from the working and problem machine. Thanks for the help...
|
|
|
|
|
|
09/05/2014 8:06 PM
post111667
|
Media rate is 0 and no packet are received, looks like a hardware issue or there is a problem with interrupt 3 ( that`s
a strange interrupt has it is often used by serial port )
-----Message d'origine-----
De : Victor Gamboa [mailto:community-noreply@qnx.com]
Envoyé : 5 septembre 2014 19:06
À : qnx4-community
Objet : Re: Network Problem...
Oleg, I attach the file with the outputs from the working and problem machine. Thanks for the help...
_______________________________________________
QNX4 Community Support
http://community.qnx.com/sf/go/post111666
To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
|
|
|
|
|
|
09/08/2014 9:20 AM
post111674
|
Hi Victor,
Send me show_pci -vvv output. Can you change interrupt of the ethernet card?
Also try to execute the following nettest.sh script:
---
#!/bin/sh
set +x
slay -f inetd Tcpip Net.rtl8169 Net
sleep 1
slay -f inetd Tcpip Net.rtl8169 Net
Net &
sleep 1
Net.rtl8169 -vvvvvvvvvv &
sleep 1
Tcpip qnx
sleep 1
ifconfig en1 192.168.1.50 up
sleep 1
ping -c3 192.168.1.12
---
Send me output of this script.
Respectfully,
Oleg
06 сент. 2014 г., в 3:05:51, Victor Gamboa <community-noreply@qnx.com> написал:
> Oleg, I attach the file with the outputs from the working and problem machine. Thanks for the help...
>
>
>
> _______________________________________________
>
> QNX4 Community Support
> http://community.qnx.com/sf/go/post111666
> To cancel your subscription to this discussion, please e-mail qnx4-community-unsubscribe@community.qnx.com
> <at1.txt>
|
|
|
|
|
|
09/09/2014 10:36 AM
post111680
|
I used another motherboard and the network work fine, probably it was a hardware issue. Thank you all guys for your help
. Now I am going to make an USB boot to install QNX on a new machine with the Incompatible PCI Bios.
Thanks again for all the help. Victor
|
|
|
|
|
|