TeamForge : Post

Forum Topic - mount -p: open() on /dev/hd0 failed: (3 Items)

View: as

Mary Jane

01/15/2010 4:29 AM

post45280

mount -p: open() on /dev/hd0 failed

After booting the following message is displayed:
starting QNX
No Adaptors found
mount -p: open() on /dev/hd0 failed: No such file or directory

The hard disk is connected to a new PC with Gigabyte P55A-UD3. 
Unfortunately the old mainboard is damaged.

Any help is appreciated.
Thanks, Mary

Andrej Lucny(deleted)

05/20/2010 4:27 AM

post55212

Re: mount -p: open() on /dev/hd0 failed

SATA HDD is not supported, find mainboard with EIDE bus

Hugh Brown(deleted)

05/20/2010 7:58 AM

post55223

Re: mount -p: open() on /dev/hd0 failed

SATA hard disks are supported by QNX4 Fsys.atapi.


On 10-05-20 4:27 AM, "Andrej Lucny" <community-noreply@qnx.com> wrote:

> SATA HDD is not supported, find mainboard with EIDE bus
> 
> 
> 
> _______________________________________________
> 
> QNX4 Community Support
> http://community.qnx.com/sf/go/post55212
> 

-- 
Hugh Brown                      (613) 591-0931 ext. 2209 (voice)
QNX Software Systems Ltd.        (613) 591-3579           (fax)
175 Terence Matthews Cres.       email:  hsbrown@qnx.com
Kanata, Ontario, Canada.
K2M 1W8

Return