Feed for discussion QNX Momentics Getting Started in project Community.

post122626: Re: Momentics skips to next breakpoint when trying to step into libc function

2024-10-21T14:29:27Z

In eclipse you can hold ctrl hover over function and press F5 to step in selected function (I am not sure of shortcut what step in shortcut but you need to ctrl hover the function).

If this does not work split into 2 lines

a(

b()

);

if you step over b() first it should go back to line where a is and you can step in

post122625: Re: Momentics skips to next breakpoint when trying to step into libc function

2024-10-21T08:27:08Z

Yes, I don't really need to do debugging inside libc, but it is annoying in cases such as:

my_function(some_string.c_str());

Since c_str() is called, when I want to step into my_function to debug it, Momentics will first go inside c_str() and behave like I have described in my original post

post122624: Re: Momentics skips to next breakpoint when trying to step into libc function

2024-10-18T16:37:31Z

Likely memcpy is inline function (compiler optimization to make it fasr) - there is some option you can do to prevent inlining something like -fnobuiltin (please google i don't remember exact name)

Even if its not - you don't have code for libc so you need to do step instruction mode to go over assembly, unlikely it will help you

post122623: Momentics skips to next breakpoint when trying to step into libc function

2024-10-18T14:32:46Z

I am trying to debug an application in Momentics and everything seems to be working fine except for one instance: when I get to a line containing a function from libc.so such as memcpy and click Step Into. the program continues executing as if I pressed Resume. If there is a breakpoint somewhere it stops at that breakpoint, otherwise it continues executing until program end.

I have seen that this might be a problem due to Momentics not being able to load library symbols. However, for libc I have in my search paths libc.so.5 and libc.so.5.sym

Both have debug symbols, checked with objdump --syms

Momentics automatically loads libc.so.5.sym and the name of library does not correspond with its SONAME, and I thought this would be issue.

However, I've renamed libc.so.5.sym to libc.so.5 so that SONAME should be ok and I still have the same problem.

Please help me solve this issue, it would be ok even if Momentics just did a Step Over instead of trying to go into the function when clicking Step Into

post122489: Re: Using qconn with QNX 7 and Momentics.

2024-02-16T11:35:04Z

In the end I did a complete re-install of QNX 7 including Momentics. Now the debugger works.

Not sure what the problems was.

Thanks for your help.

post122487: Re: Using qconn with QNX 7 and Momentics.

2024-02-15T13:59:19Z

IDE cannot upgrade or downgrade. Just select one you want and install in separate folder. If you don't see all version check Show all versions in Add Installlation.... screen

But all IDE above 7.0 will support 7.0, the error you seeing something to do with debugger or communication not ide

post122486: Re: Using qconn with QNX 7 and Momentics.

2024-02-15T10:13:35Z

Have not yet re-installed. I did use the Software Center to do a "Verify Installation". It found quite a number of problems but I eventually got it to the state where it says everything is fine.

Then I attempted to try and follow the instructions in this knowledge base article:

https://www.qnx.com/support/knowledgebase.html?id=5015Y000001jIX4

But I cannot perform a downgrade. I eventually figured out that I needed to select the "Installed" tab, then right click on "QNX (R) Momentics IDE", and click on "Downgrade...". I then got the message "No updates found. Configure available software sites to reach more content". I clicked the "available software sites" link in the message box, and this leads to a dialogue with a list of available software sites. There are already four in the list (all on my C drive), but I used the "Add..." button to add another. I called it "QNX download center" and guessed at a location of "https://www.qnx.com/download/". (see attached). Clicked "OK", and clicked "OK" on the error message box to dismiss it. Then tried right clicking and selecting "Downgrade..." again. It takes a little longer to search for the update, but eventually gets back to the "No updates found." message. So how do I downgrade? Is there another software site I should be specifying?

post122485: Re: Using qconn with QNX 7 and Momentics.

2024-02-15T08:04:42Z

If I go to Window->Preferences->QNX I see:

Select SDK = qnx700

Version = 7.0.0

SDK Tools Path = C:/qnx700/host/win64/x86_64

SDK Platform Path = c:/qnx700/target/qnx7

Prompt to clean when project SDK is changed = ticked

Seems OK. Both paths exist.

I might try to re-install QNX 7. Was hoping to avoid that.

post122483: Re: Using qconn with QNX 7 and Momentics.

2024-02-13T15:54:10Z

Python we ship with the tools. Did you select same SDP in IDE (Windows->Prefernce->QNX) as you target running?

post122482: Re: Using qconn with QNX 7 and Momentics.

2024-02-13T15:32:42Z

OK. So I tried the "C/C++ QNX Application" option for the launch configuration. Now when I try to debug I get the message "Error in final launch sequence GDB prompt not read". I have seen suggestions that this is a Python problem and I may need to downgrade "Tools - Python 2.7 (Windows 64-bit)" from the software centre. But should that have worked? Is it using qconn?

post122481: Re: Using qconn with QNX 7 and Momentics.

2024-02-13T15:04:17Z

Its just a default QNX launch configuration, you can even select binary and do Run As QNX Application...

and it will create one for you (it will ask for target IP)

post122480: Using qconn with QNX 7 and Momentics.

2024-02-13T15:01:13Z

I have debugged using qconn for many years using QNX 6.3.2. Target system is a PC running QNX 6.3.2. Development computer is another PC running Windows. These days it is Windows 10. The target machine is connected to the development machine via an Ethernet connection. Now we are moving to QNX 7, which the target machine is running, In Momentics for QNX 6.3.2 you could create a debug configuration of type "C/C++ QNX QConn (IP)", but in the version that comes with QNX 7 this option is not available. How do I debug using qconn? Is it still supported? Any help appreciated.

post122008: Re: qemu option requires the "Virtualization Drivers" package

2022-11-24T14:56:30Z

>>It is primarily intended for use as a learning aid and as a generic target for testing purposes

Thanks for the note. That is all I intended to use it for. I was just identifying why I was trying to use these architectures rather than the x86.

Attempting to setup a x86_64 launch target has other errors, maybe another topic shortly...

post122007: Re: qemu option requires the "Virtualization Drivers" package

2022-11-24T14:52:54Z

Ok thanks, found 'QNX Hypervisor Virtualisation Drivers', assume that is it.

Seems I need a QNX Hypervisor for Safety 2.2 license....

post122006: Re: qemu option requires the "Virtualization Drivers" package

2022-11-24T13:49:03Z

The ability to create virtual machine targets is not intended as a means of emulating particular targets as you seem to want. It is primarily intended for use as a learning aid and as a generic target for testing purposes.

post122005: Re: qemu option requires the "Virtualization Drivers" package

2022-11-24T13:37:42Z

If you go to All tab in qnx software center and type "Virtualization Drivers" you should find the package, however

it may be listed as unavailable as it may require extra licensing. If it is listed as Unavailable you can go to package properties and cilck "Why Unavailable" link

post122004: qemu option requires the "Virtualization Drivers" package

2022-11-24T13:34:30Z

Hi,

I'm trying to follow the quickstart guide having installed SDP7.1 & Momentics on Ubuntu 20.04 from the Software Centre under my evaluation license.

I select the 'New Launch Target' - 'QNX Virtual Machine Target'

   VM Platform - qemu

   CPU Architecture - armle-v7 (or aarch64le)

results in the error

--type=qemu option requires the "Virtualization Drivers" package

--- <arch> - process failed with exit code 1

Is this viable?  I wish to simulate the J721e platform.

How do I get the "Virtualization Drivers" package?

Regards

Stephen

post121912: Open file from command line

2022-09-06T11:26:25Z

Hi

Is it possible to get an already running Momentics instance to open a file (at a certain line) from the command line.

Eclipse can do it using "eclipse.exe --launcher.openFile filename:line"

If I try that with Momentics "qde.exe --launcher.openFile filename:line", it just spawns a new instance.

post121823: Re: Unable to build on Windows 10 -- cygwin heap error

2022-06-14T12:25:40Z

Old cygwin/msys toolchain may not work properly under Win10. I fixed the issue(Couldn't reserve space for cygwin's heap) by following below steps.

# get backup for just in case

copy msys-1.0.dll msys-1.0.dll.bak

#Open Visual Studio Command Tools Command Prompt and type following command

editbin /rebase:base=0x50000000 msys-1.0.dll

post121589: Troubles debugging on remote target momentics/dgb/remote-target

2021-09-10T22:20:17Z

noob here.

I'd like to be able to step debug on the remote target from a windows hosted momentics 7.1.    The connection between host and target is tcp/ip running on default port 8000.

Ifs on target is x86 generic.   Application built with qnx700 x86

I am able to Launch Mode 'Run'  from momentics to the target fine. (after running qconn on target).   It copies over and runs as expected.

However, when switching the momentics Launch Mode to 'Debug',   I have the issues (see attachment)

Error in final launch sequence

Error while launching command [gdb, --interpreter, mi2,--nx]

Error while launching command [gdb, --interpreter, mi2,--nx]

Cannot run program 'gdb'..Launching failed

So, I am missing something ...

is gdb supposed to be on the target (it's not).

but I also read that i should run

devc-pty &

pdebug 8000 &

Can anyone point me to a doc or provide an outline of steps needed?

thanks

post121583: Re: Moving packages to virtual image in SDP 7.1

2021-09-06T04:36:29Z

I just solve this problem by copying "usr" folder and adding it to PATH and LD_LIBRARY_PATH.

post121582: Re: Moving packages to virtual image in SDP 7.1

2021-09-05T05:39:33Z

Thanks for the help! It really helped me a lot and now I can manually include files.

But still I'm not sure how to trace all dependencies.

For example, sqlite3 has its header and shared library, but I cannot notice them unless searching manually.

Is this the only way to resolve dependencies? Or does QNX provide much better way?

post121581: Re: Moving packages to virtual image in SDP 7.1

2021-09-03T12:11:35Z

mkqnximage doesn't add every file anyone could conceivably want. Instead it provides a base set and ways of extending it.

If you build an image you'll find you have a file local/snippets/system_files.custom. Anything you put in here will get merged with the build file used for generating the system partition. So all you need do is add lines to include files you want. The format is as used my mkqnx6fsimg since this is the utility that ultimately consumes the stuff. You can look at the build file that mkqnximage created, output/build/system.build to get a better idea of what goes here.

The documentation lists the other snippet files you can have.

post121577: Moving packages to virtual image in SDP 7.1

2021-09-03T07:38:55Z

Hello, I'm a student and trying to run QDB in a virtual target image.

My working environment for setting up a virtual image is x86_64 + vbox + windows, and I downloaded QDB package to a target folder.

However, "mkqnximage", a tool for creating a virtual image, does not copy files related to QDB to the virtual image.

So, So, what did I do wrong?

post121536: Re: QNX Momentics installation on Ubuntu 20.04 LTS

2021-07-26T13:56:14Z

SDP 7.0 was release 4 years ago and Ubuntu 20 is not supported platform. It not compatible with this momentics version. It is possible to install with newer Momentics version but you have to contact via customer support.

If you are non-commercial customer its best to use SDP 7.1

post121533: QNX Momentics installation on Ubuntu 20.04 LTS

2021-07-26T06:03:04Z

I have installed QNX software center and SDP 7.0 succcessfully on Ubuntu 20.04 LTS.

But when I attempt to install the QNX momentics,It failed with the log file atttached.

I had installed Eclipse manually,It doesn't work as well.

post121360: Re: Eclipse Plugins For QNX SDP 7.0

2021-04-01T17:52:55Z

What is the actual question? Why you need plugins? There are features.

In you want to install momentics inside another eclipse you need both - you can point to installation location

post121356: Re: Eclipse Plugins For QNX SDP 7.0

2021-03-31T21:48:23Z

Ok I have redownloaded Momentics for 7.0 from Software Center.

I believe the plugin data is under C:\QNX\QNX_Momentics_IDE\features\com.qnx.tools.ide_7.0.4.x

post121355: Re: Eclipse Plugins For QNX SDP 7.0

2021-03-31T20:37:43Z

How did you get access to sdp 7.0? If it is via QNX Software Center you can download it as a package

If you admin redistribute it - they have to install it for you and give the installation path

post121354: Eclipse Plugins For QNX SDP 7.0

2021-03-31T20:28:50Z

I'm new to this but I recently got access to QNX SDP 7.0 for school.

The old instructions said plugin files could be found in C:\QNX641\host\win32\x86\usr\qde\eclipse\plugins (qnx.com.tools.*) but I cannot find the qde folder in my 7.0 installation. Was this moved?

It also appears that the Momentics IDE should be installed with it. I'm not sure where to access that application either. It may have been uninstalled when I took the old 6.5 stuff off.

post121089: Re: Unable to build on Windows 10 -- cygwin heap error

2020-11-11T08:17:52Z

I think there is no rebased version of the msys dll available that works with SDP 6.6

You can only try to reboot your machine, multiple times if need be, and launch Momentics first thing after log in.

Alternative solution is to install Linux Ubuntu in VM (Virtual Box works great) and use that.

Regards,

Albrecht

post121083: Re: Unable to build on Windows 10 -- cygwin heap error

2020-11-10T16:35:53Z

Hi,

QNX® Momentics® Integrated Development Environment

Version: 5.0.1

Build id: v201402230336

I am using QNX momentics IDE of above shown version with windows 10 in my laptop.

I am also facing similar error.(Couldn't reserve space for cygwin's heap, Win32 error 0, 0 [main] us 0 init_cheap: VirtualAlloc pointer is null, Win32 error 487)

I tried replacing just the msys-1.0.dll in C:\qnx660\host\win32\x86\usr\bin and rebooted my laptop but still I see above error.

Can you help me out to resolve this issue?

post120893: Photon Application Builder on Windows 10

2020-08-13T19:25:01Z

Is this application supported on Windows 10?

When I run QNX630\host\win32\x86\usr\bin\appbuilder.bat I get the following error:

Starting font manager...

[1055]

Starting Photon server...

[1062]

Starting Phindows...

[1074]

Starting Window Manager...

[1081]

Ap: Unable to locate Photon

PhAB exited abnormally. Photon will not be shut down.

When I try to bring up appbuilder from within QNX Momentics I see a timeout error.

Thanks

Arun

post120059: Re: Unable to build on Windows 10 -- cygwin heap error

2019-10-21T04:27:43Z

I also met the same issue with QNX6.5 on Windows 10, building for the PowerPC. I have fixed the issue by your instructions.

Thanks for your sharing!

post119751: Re: Unable to build on Windows 10 -- cygwin heap error

2019-06-10T17:35:34Z

QNX® Momentics® Integrated Development Environment

Version: 5.0.1

Build id: v201402230336

Shown above is the QNX IDE release I am using. Since an W10 update on 5/23, I am having the exactly same problem. If you know particular release of msys-1.0.dll which can solve this problem. Please notify me.

post119699: How to create a QNX OS image for 6.4

2019-05-07T09:28:45Z

I use the QNX system builder, but not sure how to create the OS image

post119664: Re: Error starting/sending application to RTOS Evaluation Run-time for VMware

2019-04-16T19:25:46Z

Thank you both, that solved the problem. :)

I created the Project as x86_64 (see project_creation.png) and let it run on the VM installed by the SoftwareCenter (see qnx700.png).

post119661: Re: Error starting/sending application to RTOS Evaluation Run-time for VMware

2019-04-16T13:11:04Z

Looking at the images that you have captured, you are attempting to run an SDP 7,0 x86 32 bit application on a QNX 6.4.1 target.

You need to setup the x86_64 SDP 7.0 VMware image that you downloaded from the QNX Software Center and change your project settings to build for x86_64.

- Dave

post119659: Re: Error starting/sending application to RTOS Evaluation Run-time for VMware

2019-04-15T13:48:50Z

If you project called test and binary called test renamed it to

something else, there is embedded command in shell called test it may

conflict...

Also is this x86_64 bit target by any chance? And you executing x86 (32)

bit binary?

On 2019-04-14 2:47 p.m., Dennes Ifländer wrote:

> Hi,

>

> i wanna test parts of my program on a vm befor using them on real hardware,

> so exactly that what the "QNX Neutrino RTOS Evaluation Run-time for VMware" is made for.

>

>

>

> Problem:

> --------

> Building works, but after pressing Launch-Button the IDE throws the following errormessage (or see screenshot.png):

>>> Error in final launch sequence

>>> Cannot prepare and download the binary

>>> Error starting remote application /tmp/main: Target

>>> launcher@<192.168.237.128:8000>: Unknown response error Attempting to exec a

>>> shared lib

>>> Target launcher@<192.168.237.128:8000>: Unknown response error Attempting to

>>> exec a shared lib

>

> Informations:

> -------------

> Tried it with 2 hosts (every combination same result).

> Host1: Windows 7, VMware Workstation 9

> Host2: Windows 10, VMware Player 15

>

> IDE: Momentics 7.0.3.v201804261557

>

> I tried 2 VMware Images:

> 1.) Neutrino641Target: http://www.qnx.de/download/feature.html?programid=20725

> 2.) qnx700.x86_64.7.0.0.SGA201703011126: Downloaded using Software Center

>

> I followed this Guide:

> http://www.qnx.com/developers/docs/7.0.0/#com.qnx.doc.qnxsdp.quickstart/topic/about.html

>

> The program is the by default generated HalloWorld program.

> The program gets build without any errors.

>

>

> Attachments:

> ------------

> screenshot.png: Shows Windows7 host with Momentics Errormessage, QNX running on a VMware Workstation9 and Console windows showing the current IP-adresses.

> windows_ipconfig_all.txt: Shows output from ipconfig /all command on the Windows7 host.

> qnx_qconn.png: Shows QNX 6.41 as VM that qconn is running

> momentics_qnxrtos_cpu_details.png: Shows that the QNX 6.41 VM uses a x86 architecture.

> project_creation.png: Shows creation as C++ Project for x86 architecture. ("File" -> "New" -> "QNX Project" -> "C/C++" -> "QNX Executable")

> qnx_boot.png: Shows mvSata Interface not found while booting.

>

>

>

> Can somebody gave me instructions to solve the problem?

>

> Greetings

> Dennes

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post119658

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post119658: Error starting/sending application to RTOS Evaluation Run-time for VMware

2019-04-14T18:47:17Z

Hi,

i wanna test parts of my program on a vm befor using them on real hardware,

so exactly that what the "QNX Neutrino RTOS Evaluation Run-time for VMware" is made for.

Problem:

--------

Building works, but after pressing Launch-Button the IDE throws the following errormessage (or see screenshot.png):

>> Error in final launch sequence

>> Cannot prepare and download the binary

>> Error starting remote application /tmp/main: Target

>> launcher@<192.168.237.128:8000>: Unknown response error Attempting to exec a

>> shared lib

>> Target launcher@<192.168.237.128:8000>: Unknown response error Attempting to

>> exec a shared lib

Informations:

-------------

Tried it with 2 hosts (every combination same result).

Host1: Windows 7, VMware Workstation 9

Host2: Windows 10, VMware Player 15

IDE: Momentics 7.0.3.v201804261557

I tried 2 VMware Images:

1.) Neutrino641Target: http://www.qnx.de/download/feature.html?programid=20725

2.) qnx700.x86_64.7.0.0.SGA201703011126: Downloaded using Software Center

I followed this Guide:

http://www.qnx.com/developers/docs/7.0.0/#com.qnx.doc.qnxsdp.quickstart/topic/about.html

The program is the by default generated HalloWorld program.

The program gets build without any errors.

Attachments:

------------

screenshot.png: Shows Windows7 host with Momentics Errormessage, QNX running on a VMware Workstation9 and Console windows showing the current IP-adresses.

windows_ipconfig_all.txt: Shows output from ipconfig /all command on the Windows7 host.

qnx_qconn.png: Shows QNX 6.41 as VM that qconn is running

momentics_qnxrtos_cpu_details.png: Shows that the QNX 6.41 VM uses a x86 architecture.

project_creation.png: Shows creation as C++ Project for x86 architecture. ("File" -> "New" -> "QNX Project" -> "C/C++" -> "QNX Executable")

qnx_boot.png: Shows mvSata Interface not found while booting.

Can somebody gave me instructions to solve the problem?

Greetings

Dennes

post119122: Re: How to install .qpr file

2018-09-18T02:58:11Z

Thank Martin Gagnon.

It's worked in QNX6.4.1!

> I've repackage workspace in a straight .tgz.. so it can be install easily in

> QNX 6.4 just by typing:

>

> tar xvzf workspace-0.5C.tgz -C /

>

> as root.

>

> --

> Martin

post119108: Re: Installation issues

2018-09-16T09:47:55Z

Hi, I am also Turkish and have the same problem so I thought maybe the problem is about language. By changing windows language to default English problem solved. This is an old topic but it is top on google search thus it may help people in the future.

post118980: Re: qconfig.mk file disappears after installing the 6.5 service pack

2018-07-19T18:18:05Z

Hi Patrick,

Service Pack installer requires these environment variables to be set:

$QNX_TARGET

$QNX_CONFIGURATION

echo $QNX_TARGET $QNX_CONFIGURATION to make sure they are set after installing 6.5.0.

You can also try passing these variables to 650SP1 installing in the following way:

sudo QNX_TARGET="/opt/qnx650/target/qnx6" QNX_CONFIGURATION="/etc/qnx" ./650SP1-installer.bin

These are the default values for $QNX_TARGET and $QNX_CONFIGURATION. They must be substituted as needed.

post118979: Re: Unable to reinstall QNX6.6. Gettting already installed error

2018-07-19T17:58:40Z

Never mind, found it. Same xml file still existed.

post118978: Re: Unable to reinstall QNX6.6. Gettting already installed error

2018-07-19T17:52:23Z

Any hints on how to resolve this on a Linux installation?

Thanks

Kevin

post118909: Re: qconfig.mk file disappears after installing the 6.5 service pack

2018-07-03T15:13:11Z

Sorry to comment on such an old post, but the suggestions don't work for me. Whatever I do, after installing SP1 a bunch of essential files are missing. This includes the *.mk files mentioned above, but also lots of headers like errno.h. I'm on Ubuntu 18.04 (x86_64).

What causes this? It seems the installer doesn't do much besides extracting files and setting up /etc/profile for the env. vars. Can't we just get a zipfile with SP1 to extract on top of a clean 6.5.0 installation? I can copy the missing files from a clean 6.5.0 install but i'm sure that's not the best approach...

post118840: Re: USB support on QNX

2018-05-22T14:46:14Z

No, io-usb is just the raw low-level USB support. To use USB flash drive you need to additionally launch devb-umass driver, which will create /dev/hdX and enumerate all the partitions on the drive, ususally a t11 or t12. You can then mount them with mount -tdos /dev/hdXt11 /fs/usb0 (or wherever you want)

Regards,

Al

post118838: Re: USB support on QNX

2018-05-22T14:24:54Z

does io-usb create /dev/hdxxx node?

post118675: Re: how to check the number of cpu

2018-03-15T20:17:09Z

first you should check the root accses with some apps like: http://dlandroid.com/root-check-apk/

if you don't have root accses try to root with kingroot : http://dlandroid.com/kingroot/

post118665: Re: QNX Installation

2018-03-13T18:46:34Z

QNX 4 questions should be posted to the QNX4 forum.

http://community.qnx.com/sf/discussion/do/listTopics/projects.community/discussion.qnx4_community_support

- Dave

post118261: QNX Installation

2017-12-05T08:55:04Z

Hello Sir.

Sir I'm using SanDisk Ultra USB 3.0 (14 Gigabyte Memory) to install

QNX 4.25 ISO file on PXIe-8130 Embeded controller

using PXIe-1071 Chassis. I made QNX 4.25 ISO file using MagicISO

software and then I made USB Bootable using XBoot

Software. I tried other softwares (i.e. UltraISO, Rufus, PowerISO

etc.) to make it Bootable but it always failed, Only

XBoot did it successfuly.

Now, when I plug-in USB and Boot system from USB, it stops just after

a few initial steps, means, Screen shows option to

select Operating System to be installed. QNX 4.25 is also showed

there. When I click on it, it simply hangs up there

and following message is shown on screen:

"B kbd Unable to open system initialization file: corrupted file

system detected"

I am in doubt that may be I'm committing some mistake in making USB Bootable.

Please guide me in the light of your greater experience please.

Thanks in advance.

post118246: Re: Pros/cons of Macbook Pro as development host

2017-11-27T14:40:05Z

Maybe worth mentioning Mac host is only supported with 7.0 SDP, if you choose 6.6 you cannot use it

> Thanks.   I've been browsing the documentation and notice that in certain

> areas, there are only references to Windows and Linux hosts, but not to macOS

> hosts.   Examples:

>

> http://www.qnx.com/products/apps-media/download.html

> and

> http://www.qnx.com/developers/docs/6.6.0_anm11_wf10/#com.qnx.doc.am.

> embed_browser/topic/build_image_transfer_to_target.html

>

> I wonder what options a mac developer has when faced with the above.

>

> Sorry for the newbie questions.   We're in the process of evaluating QNX.

>

post118244: Re: Pros/cons of Macbook Pro as development host

2017-11-27T14:15:32Z

Those links are not for the most recent version of the product.  For SDP

70, everything is downloaded though something called "QNX Software

Center".

On 2017-11-27, 3:10 AM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>Thanks.   I've been browsing the documentation and notice that in certain

>areas, there are only references to Windows and Linux hosts, but not to

>macOS hosts.   Examples:

>

>http://www.qnx.com/products/apps-media/download.html

>and

>http://www.qnx.com/developers/docs/6.6.0_anm11_wf10/#com.qnx.doc.am.embed_

>browser/topic/build_image_transfer_to_target.html

>

>I wonder what options a mac developer has when faced with the above.

>

>Sorry for the newbie questions.   We're in the process of evaluating QNX.

>

>> Developers at QNX use a mixture.  I've used OSX exclusively since 2010

>>and

>> not regretted it once.  While Elena is not doubt right that Linux is the

>> platform that is least likely to have problems, OSX works well.

>>

>> On 2017-11-22, 7:04 AM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>>

>> >> IMHO ideal host is linux, Windows is the worst because its just

>> >>horrific as

>> >> build time goes, especially with make

>> >> systems and especially if your IT install antivirus, hard drive

>> >>encryption,

>> >> continuous backup and other very useful utilities,

>> >> which will make you build 100 TIMES slower then on linux (not

>>joking).

>> >>

>> >> Mac is reasonable choice too, the only cons is that is less used

>> >>platform so

>> >> it will have more bugs in tools and IDE

>> >Thanks for your reply.    I just heard from a well-placed source that

>>QNX

>> >themselves internally use Macs for development.   I'm not sure how

>> >current this information is, but if it's current and it's true, then

>>Macs

>> >would be at least about par with Linux and Windows as a far as bug

>>fixing

>> >priority for the tool chain goes.

>>

>

post118240: Re: Pros/cons of Macbook Pro as development host

2017-11-27T08:10:20Z

Thanks.   I've been browsing the documentation and notice that in certain areas, there are only references to Windows and Linux hosts, but not to macOS hosts.   Examples:

http://www.qnx.com/products/apps-media/download.html

and

http://www.qnx.com/developers/docs/6.6.0_anm11_wf10/#com.qnx.doc.am.embed_browser/topic/build_image_transfer_to_target.html

I wonder what options a mac developer has when faced with the above.

Sorry for the newbie questions.   We're in the process of evaluating QNX.

> Developers at QNX use a mixture.  I've used OSX exclusively since 2010 and

> not regretted it once.  While Elena is not doubt right that Linux is the

> platform that is least likely to have problems, OSX works well.

>

> On 2017-11-22, 7:04 AM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>

> >> IMHO ideal host is linux, Windows is the worst because its just

> >>horrific as

> >> build time goes, especially with make

> >> systems and especially if your IT install antivirus, hard drive

> >>encryption,

> >> continuous backup and other very useful utilities,

> >> which will make you build 100 TIMES slower then on linux (not joking).

> >>

> >> Mac is reasonable choice too, the only cons is that is less used

> >>platform so

> >> it will have more bugs in tools and IDE

> >Thanks for your reply.    I just heard from a well-placed source that QNX

> >themselves internally use Macs for development.   I'm not sure how

> >current this information is, but if it's current and it's true, then Macs

> >would be at least about par with Linux and Windows as a far as bug fixing

> >priority for the tool chain goes.

>

post118239: Re: QNX continuous integration with Team Foundation Server

2017-11-24T23:38:32Z

Thanks - I subscribed to CDT Doug.   Great blog.

> BTW if you go down the cmake road, you can get the updated toolchain file

> from https://cdtdoug.ca/qnx-cmake-toolchain-file/

>

> On 2017-11-22, 5:10 PM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>

> >We use Microsoft Team Foundation Server to run continuous integration for

> >application development (Windows/iOS).    Now evaluating QNX and wish to

> >sound the forum out for experiences with this setup.   I realise that it

> >may not be ideal, but we wish to leverage existing infrastructure and

> >technical know-how as much as it is practical to do so.

> >

> >As a minimum, this is what we want to achieve:

> >1. Develop with Momentics using an Eclipse plugin for TFS to access Git

> >repos hosted in TFS.

> >2. Create an automated build task in TFS to trigger a build on commit.

> >TFS is compatible with CMAKE with VisualGDB.   When triggered, build

> >agents wake up to build the project and hand off to the next step.   Our

> >QNX targets are likely going to be x86.

> >3. Unit tests kick in automatically.    Doxygen kicks in to update

> >documentation.

> >4. New executable gets deployed to a test VM.

> >5. Error reports get emailed to devs.

> >This is generally the process we use for application development and

> >would love to know how well or poorly QNX dev fits in this process.

> >

> >Thank you.

> >

> >

> >

> >_______________________________________________

> >

> >QNX Momentics Getting Started

> >http://community.qnx.com/sf/go/post118233

> >To cancel your subscription to this discussion, please e-mail

> >momenticsgs-community-unsubscribe@community.qnx.com

>

post118236: Re: QNX continuous integration with Team Foundation Server

2017-11-23T14:51:24Z

BTW if you go down the cmake road, you can get the updated toolchain file

from https://cdtdoug.ca/qnx-cmake-toolchain-file/

On 2017-11-22, 5:10 PM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>We use Microsoft Team Foundation Server to run continuous integration for

>application development (Windows/iOS).    Now evaluating QNX and wish to

>sound the forum out for experiences with this setup.   I realise that it

>may not be ideal, but we wish to leverage existing infrastructure and

>technical know-how as much as it is practical to do so.

>

>As a minimum, this is what we want to achieve:

>1. Develop with Momentics using an Eclipse plugin for TFS to access Git

>repos hosted in TFS.

>2. Create an automated build task in TFS to trigger a build on commit.

>TFS is compatible with CMAKE with VisualGDB.   When triggered, build

>agents wake up to build the project and hand off to the next step.   Our

>QNX targets are likely going to be x86.

>3. Unit tests kick in automatically.    Doxygen kicks in to update

>documentation.

>4. New executable gets deployed to a test VM.

>5. Error reports get emailed to devs.

>This is generally the process we use for application development and

>would love to know how well or poorly QNX dev fits in this process.

>

>Thank you.

>

>

>

>_______________________________________________

>

>QNX Momentics Getting Started

>http://community.qnx.com/sf/go/post118233

>To cancel your subscription to this discussion, please e-mail

>momenticsgs-community-unsubscribe@community.qnx.com

post118235: Re: QNX continuous integration with Team Foundation Server

2017-11-23T14:05:30Z

All of this sounds reasonable. At first glance, MS ships an Eclipse

plug-in that seems well featured, and CMAKE does have QNX support. At the

worst, it looks like TFS supports command line calls for their build &

release tasks. Looks like TFS has an SSH deploy task, so you could use

that to deploy the built binaries to the test VM, trigger tests and copy

back results. Unfortunately it doesn¹t look like TFS supports gcov for

code coverage results.

However, as far as I¹m aware, it is not something anyone has done. I¹d

recommend trying it out as part of your evaluation. If you have questions

along the way, please let us know.

On 2017-11-22, 5:10 PM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>We use Microsoft Team Foundation Server to run continuous integration for

>application development (Windows/iOS).    Now evaluating QNX and wish to

>sound the forum out for experiences with this setup.   I realise that it

>may not be ideal, but we wish to leverage existing infrastructure and

>technical know-how as much as it is practical to do so.

>

>As a minimum, this is what we want to achieve:

>1. Develop with Momentics using an Eclipse plugin for TFS to access Git

>repos hosted in TFS.

>2. Create an automated build task in TFS to trigger a build on commit.

>TFS is compatible with CMAKE with VisualGDB.   When triggered, build

>agents wake up to build the project and hand off to the next step.   Our

>QNX targets are likely going to be x86.

>3. Unit tests kick in automatically.    Doxygen kicks in to update

>documentation.

>4. New executable gets deployed to a test VM.

>5. Error reports get emailed to devs.

>This is generally the process we use for application development and

>would love to know how well or poorly QNX dev fits in this process.

>

>Thank you.

>

>

>

>_______________________________________________

>

>QNX Momentics Getting Started

>http://community.qnx.com/sf/go/post118233

>To cancel your subscription to this discussion, please e-mail

>momenticsgs-community-unsubscribe@community.qnx.com

post118233: QNX continuous integration with Team Foundation Server

2017-11-22T22:10:53Z

We use Microsoft Team Foundation Server to run continuous integration for application development (Windows/iOS).    Now evaluating QNX and wish to sound the forum out for experiences with this setup.   I realise that it may not be ideal, but we wish to leverage existing infrastructure and technical know-how as much as it is practical to do so.

As a minimum, this is what we want to achieve:

1. Develop with Momentics using an Eclipse plugin for TFS to access Git repos hosted in TFS.

2. Create an automated build task in TFS to trigger a build on commit.   TFS is compatible with CMAKE with VisualGDB.   When triggered, build agents wake up to build the project and hand off to the next step.   Our QNX targets are likely going to be x86.

3. Unit tests kick in automatically.    Doxygen kicks in to update documentation.

4. New executable gets deployed to a test VM.

5. Error reports get emailed to devs.

This is generally the process we use for application development and would love to know how well or poorly QNX dev fits in this process.

Thank you.

post118231: RE: Pros/cons of Macbook Pro as development host

2017-11-22T15:31:05Z

I recently switched from Mac to Windows 10. It's not absolutely horrible. I also find it depends on what your build system is doing. Copying lots of files around is slow. I've been experimenting with CMake and Ninja for a BSP I'm working on and it's pretty fast. It's around 300 files and I can build it in about a minute. I imagine a well structured Makefile running with make -j would be pretty good too.

Doug.

> -----Original Message-----

> From: Roger Maclean [mailto:community-noreply@qnx.com]

> Sent: Wednesday, November 22, 2017 8:25 AM

> To: momenticsgs-community@community.qnx.com

> Subject: Re: Pros/cons of Macbook Pro as development host

>

> Developers at QNX use a mixture.  I've used OSX exclusively since 2010 and not

> regretted it once.  While Elena is not doubt right that Linux is the platform that is

> least likely to have problems, OSX works well.

>

> On 2017-11-22, 7:04 AM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>

> >> IMHO ideal host is linux, Windows is the worst because its just

> >>horrific as  build time goes, especially with make  systems and

> >>especially if your IT install antivirus, hard drive encryption,

> >>continuous backup and other very useful utilities,  which will make

> >>you build 100 TIMES slower then on linux (not joking).

> >>

> >> Mac is reasonable choice too, the only cons is that is less used

> >>platform so  it will have more bugs in tools and IDE

> >Thanks for your reply.    I just heard from a well-placed source that QNX

> >themselves internally use Macs for development.   I'm not sure how

> >current this information is, but if it's current and it's true, then

> >Macs would be at least about par with Linux and Windows as a far as bug

> >fixing priority for the tool chain goes.

>

>

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post118230

> To cancel your subscription to this discussion, please e-mail momenticsgs-

> community-unsubscribe@community.qnx.com

post118230: Re: Pros/cons of Macbook Pro as development host

2017-11-22T13:47:35Z

Developers at QNX use a mixture.  I've used OSX exclusively since 2010 and

not regretted it once.  While Elena is not doubt right that Linux is the

platform that is least likely to have problems, OSX works well.

On 2017-11-22, 7:04 AM, "Froilan Yap" <community-noreply@qnx.com> wrote:

>> IMHO ideal host is linux, Windows is the worst because its just

>>horrific as

>> build time goes, especially with make

>> systems and especially if your IT install antivirus, hard drive

>>encryption,

>> continuous backup and other very useful utilities,

>> which will make you build 100 TIMES slower then on linux (not joking).

>>

>> Mac is reasonable choice too, the only cons is that is less used

>>platform so

>> it will have more bugs in tools and IDE

>Thanks for your reply.    I just heard from a well-placed source that QNX

>themselves internally use Macs for development.   I'm not sure how

>current this information is, but if it's current and it's true, then Macs

>would be at least about par with Linux and Windows as a far as bug fixing

>priority for the tool chain goes.

post118229: Re: Pros/cons of Macbook Pro as development host

2017-11-22T12:04:59Z

> IMHO ideal host is linux, Windows is the worst because its just horrific as

> build time goes, especially with make

> systems and especially if your IT install antivirus, hard drive encryption,

> continuous backup and other very useful utilities,

> which will make you build 100 TIMES slower then on linux (not joking).

>

> Mac is reasonable choice too, the only cons is that is less used platform so

> it will have more bugs in tools and IDE

Thanks for your reply. I just heard from a well-placed source that QNX themselves internally use Macs for development. I'm not sure how current this information is, but if it's current and it's true, then Macs would be at least about par with Linux and Windows as a far as bug fixing priority for the tool chain goes.

post118228: Re: Pros/cons of Macbook Pro as development host

2017-11-21T14:28:57Z

IMHO ideal host is linux, Windows is the worst because its just horrific as build time goes, especially with make

systems and especially if your IT install antivirus, hard drive encryption, continuous backup and other very useful utilities,

which will make you build 100 TIMES slower then on linux (not joking).

Mac is reasonable choice too, the only cons is that is less used platform so it will have more bugs in tools and IDE

post118227: Pros/cons of Macbook Pro as development host

2017-11-21T12:54:49Z

Can someone in the forum who uses macOS as a dev host please comment on the pros and cons. What would be the ideal dev host OS for QNX development and why?

thanks

post118226: Re: Where is the QNX Evaluation Kit?

2017-11-21T12:51:37Z

Thank you. I have gotten in touch with a distributor and we are now in the process of evaluation.

post118197: Re: Where is the QNX Evaluation Kit?

2017-11-13T18:23:29Z

I asked one of the product managers, and here's his reply:

QNX evaluation kits are not available for QNX SDP 7.0 at this point. We currently have a VMWare image and BSPs that can be loaded onto reference boards and enable you to perform an evaluation at that level.

You can proceed in one of two ways depending on the overall requirements of your evaluation.

The evaluation kits that we currently have are for QNX SDP 6.6. If you have a requirement for Qt, HTML5 or multi-media, we suggest that QNX SDP 6.6 be used for the evaluation. If you don’t have a requirement for those technologies, our suggestion is to evaluate QNX SDP 7.0 using a BSP for a reference board you have or the QNX SDP 7.0 x86-64 virtual machine for VMware that is available through the QNX Software Center.

post118190: Where is the QNX Evaluation Kit?

2017-11-10T11:16:50Z

New to QNX. Signed up for 30-day trial, downloaded Momentics, and now want to try out the QNX Evaluation Kit described in the following page

http://www.qnx.com/products/reference-design/evaluation_kits.html

Does anyone know where I can find this?

post118172: Re: Hhow to make Bootable USB of QNX OS

2017-11-01T17:39:16Z

Sir first of all thank you so much for replying.

Sir I'm using SanDisk Ultra USB 3.0 (14 Gigabyte Memory) to install

QNX 4.25 ISO file on PXIe-8130 Embeded controller

using PXIe-1071 Chassis. I made QNX 4.25 ISO file using MagicISO

software and then I made USB Bootable using XBoot

Software. I tried other softwares (i.e. UltraISO, Rufus, PowerISO

etc.) to make it Bootable but it always failed, Only

XBoot did it successfuly.

Now, when I plug-in USB and Boot system from USB, it stops just after

a few initial steps, means, Screen shows option to

select Operating System to be installed. QNX 4.25 is also showed

there. When I click on it, it simply hangs up there

and following message is shown on screen:

"B kbd Unable to open system initialization file: corrupted file

system detected"

I am in doubt that may be I'm committing some mistake in making USB Bootable.

Please guide me in the light of your greater experience please.

Thanks in advance.

On Wed, Nov 1, 2017 at 7:04 PM, Albrecht Uhlmann <community-noreply@qnx.com>

wrote:

> Hello Raja,

> my guess is that the boot image on USB disk is located somewhere in a

> region on the disk that is not accessible by QNX 4 boot loader. Mayb try a

> real old fashined stick of 512 MB or so?

>

> Regards,

> Albrecht

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post118168

> To cancel your subscription to this discussion, please e-mail

> momenticsgs-community-unsubscribe@community.qnx.com

>

post118171: Re: Hhow to make Bootable USB of QNX OS

2017-11-01T17:37:36Z

post118170: Re: USB support on QNX

2017-11-01T17:35:03Z

post118168: Re: Hhow to make Bootable USB of QNX OS

2017-11-01T14:04:22Z

Hello Raja,

my guess is that the boot image on USB disk is located somewhere in a region on the disk that is not accessible by QNX 4 boot loader. Mayb try a real old fashined stick of 512 MB or so?

Regards,

Albrecht

post118164: Hhow to make Bootable USB of QNX OS

2017-10-31T10:44:50Z

Hello Sir,

This is Raja Naeem from Pakistan.

I just wanted to know that is there any way to make any version of QNX bootable in USB. I tried to make QNX 4.25 bootable using XBoot software. Although it done but there is an issue. When I plug-in the USB in CPU and reboot system from USB, it starts QNX initial loading but after that system hangs up there. It doesn't make any further progress. I tried again and again but same issue is repeated. I thought that there is some issue in making USB bootable, may be USB is not proper bootable.

Sir kindly guide my in this regard.

Thanks a lot in advance.

post117850: Re: Copying files from QNX to DOS Floppy

2017-07-05T15:16:39Z

Sounds like the box you have may be running QNX4 rather than QNX6. You would be best to post your question in the QNX4 discussion forum.

Thanks,

Dave

post117780: Copying files from QNX to DOS Floppy

2017-06-09T04:56:20Z

I used to use QNX back in late 90s, and I have a QNX box that goes back to those days (still work!). I need to get some files from this QNX machine onto a floppy drive, and I have forgotten how to do this. I looked around on the internet and did not find anything that worked.

Could someone just give me a few lines of instructions on how to do this?

Thanks,

Mo

post117586: Re: Unable to build on Windows 10 -- cygwin heap error

2017-03-31T16:54:42Z

Yes it is working, but I wanted to see if it is the same fix as I applied or a different one. I'd rather have a fix from the QNX team than one I found on an unrelated forum. I also want to have the most robust fix available.

Thanks for the link to the download area.

post117585: Re: Unable to build on Windows 10 -- cygwin heap error

2017-03-31T16:51:17Z

I thought you said its working... I am not sure where is it exactly but tools download area is here

http://community.qnx.com/sf/go/projects.toolchain/frs

post117584: Re: Unable to build on Windows 10 -- cygwin heap error

2017-03-31T16:51:04Z

Is this the patch?

http://community.qnx.com/sf/discussion/do/listPosts/projects.ide/discussion.ide.topc12693?_pagenum=1

post117583: Re: Unable to build on Windows 10 -- cygwin heap error

2017-03-31T16:35:28Z

Thank you. Can you send me a pointer to the patch (name of the thread in the forum)?

post117582: Re: Unable to build on Windows 10 -- cygwin heap error

2017-03-31T12:17:28Z

Yes we aware if that thank you. Unfortunately it cannot be universally fixed and in some specific Windows configurations

you have to apply a patch that used a different hard-coded offset. The patch is also posted in command line tools qnx community project

post117578: Unable to build on Windows 10 -- cygwin heap error

2017-03-31T00:48:46Z

I installed Momentics IDE 4.7.0 on Windows 10, building for the TI AM335x.  The rest of my team is building on Windows 7.  On my Windows 10 machine, the build failed with the following error:

--------------------------

**** Build of configuration QNX QCC for project move_sitara335x-src ****

make all

cp -rf prebuilt/* install

      0 [main] us 0 init_cheap: VirtualAlloc pointer is null, Win32 error 487

AllocationBase 0xEB0000, BaseAddress 0x1110000, RegionSize 0x11A0000, State 0x2000

C:\QNX650\host\win32\x86\usr\bin\sh.exe: *** Couldn't reserve space for cygwin's heap, Win32 error 0

make: *** [prebuilt] Error 1

--------------------------

From some searching on the web, I found that this is a Cygwin problem (I assume Cygwin is installed with Momentics, and runs underneath it).  The fix I found is described here:

https://github.com/msysgit/msysgit/issues/123

which links to the following link, where I downloaded mysys-1.0.zip and replaced it at c:\\QNX650\host\win32\x86\usr\bin:

http://support.code-red-tech.com/CodeRedWiki/VirtualAllocPointerNull?action=AttachFile&do=view&target=msys-1.0.zip

I did as the link suggests, replacing msys-1.0.dll in the directory where I found it, at QNX650\host\win32\x86\usr\bin, and this fixed the problem.  The build now works.

Is The QNX development team aware of this?

post117543: Paid Personal tasks ！make a webserver on QNX 6.5.0 on ARM cotex A9 and a easy web

2017-03-16T09:41:14Z

please call 13426314648

英文不好一个小活 QNX 650 下做个webserver 一个简单网页上面几个按钮底层留几个通信接口接口

有偿服务价格可谈

post117433: Running QNX6.6 using the VirtualBox Virtual Machine

2017-02-16T17:36:52Z

I am trying to qnx6.6 in VirtualBox - http://www.virtualbox.org/. version 5.1.14.

But when i startup i get a core dump.

I attached a pictrue.

I have a VM running in VMWare but it runs really slow.

So i created a OVF file from VMWare and imported that into VirtualBox.

any ideas

post117259: Re: bsp beagbone black sd card troubles

2016-12-07T23:43:51Z

sorry for the double post but i want to put some serial console output as to text files hoping that someone can guide me thanks

post117253: Re: default root password for qnx neutrino rtos in beagleboard black

2016-12-07T06:27:42Z

hi may ask how you were able to install qnx on the beaglebone black as i have not even been able to get as far as you could you please help

post117252: bsp beagbone black sd card troubles

2016-12-07T06:20:02Z

hi desperateley need help getting my beaglebone black to boot qnx and be able to right some code in momentics i have reviewed some of the literature on subject and followed it to the letter i am on a academic license can someone please help me

post117251: default root password for qnx neutrino rtos in beagleboard black

2016-12-07T04:32:49Z

hi,

I just installed qnx to a beaglebone black board. I am using serial terminal to access to it and be able to executing several commands. How can I login as root in this environment?

thank

post117249: Re: QNX - Beaglebone Black - Unable to set the target in QNX Momentics

2016-12-05T22:02:24Z

We tried to use the serial terminal several times but did not get any luck.  We install the serial driver as in attached image.  Plugged the board in, power it up. Then we tried to use Putty to connect to it, nothing come up.  We also tried to use hyper terminal to connect to it with the same setting, the terminal responsed "Unable to connect to COM7, please check your port setting"

That was why we decided to blindly write to command to uEnv.txt as the alternative solution.  That was how we got a little further with the Ethernet IP address with the hope that we can remote access to it or target it from QNX Momentics.  But we stuck again :)

Do you have any recommendation or suggestion for us?

post117246: Re: QNX - Beaglebone Black - Unable to set the target in QNX Momentics

2016-12-05T14:52:56Z

I think at this point, your best bet would be to attach a serial cable to

the console to see what¹s happening. You¹ll be able to see what¹s

happening from the u-boot boot on up and see if there are any error

messages.

Doug.

On 2016-12-05, 9:25 AM, "Michael Nguyen" <community-noreply@qnx.com> wrote:

>hi can someone help us with the following research issues,

>

>we are trying to build and install qnx neutrino into beaglebone black

>system with the following steps:

>

>1. download the latest BSP from

>http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beag

>lebone

>

>2.  Build the package and get the image

>

>3.  Create SD boot card and boot the board following the user guide steps

>

>we faced following issues:

>

>3.1.  when we install the driver for USB connection on window 10, the

>installation was failed

>3.2.  we still tried to boot be board with the sd card and Ethernet cable

>connection and get the following result:

> 3.2.1 two steady lights come up

> 3,2.2 we can see the board ip address in the router and get the ping

>from reply

>

>however we can not connect ssh/telnet to the above ip address, nor be

>able to set up the target to that IP address using qnx momentics IDE.

>

>Thank you

>

>

>

>

>

>

>_______________________________________________

>

>QNX Momentics Getting Started

>http://community.qnx.com/sf/go/post117245

>To cancel your subscription to this discussion, please e-mail

>momenticsgs-community-unsubscribe@community.qnx.com

post117245: QNX - Beaglebone Black - Unable to set the target in QNX Momentics

2016-12-05T14:25:26Z

hi can someone help us with the following research issues,

we are trying to build and install qnx neutrino into beaglebone black system with the following steps:

1. download the latest BSP from http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335Beaglebone

2.  Build the package and get the image

3.  Create SD boot card and boot the board following the user guide steps

we faced following issues:

3.1.  when we install the driver for USB connection on window 10, the installation was failed

3.2.  we still tried to boot be board with the sd card and Ethernet cable connection and get the following result:

3.2.1 two steady lights come up

3,2.2 we can see the board ip address in the router and get the ping from reply

however we can not connect ssh/telnet to the above ip address, nor be able to set up the target to that IP address using qnx momentics IDE.

Thank you

post116765: Re: Wrong instrucions for building EFS project in Momentics IDE 5.0.1?

2016-09-09T07:33:19Z

Hello Dave,

I have created an EFS image, i already have a ifs image in my project but to use passwd utility on my target board during runtime, i am trying to build efs image(editable during run time). Can u pls suggest me how i can use efs image along with ifs image. For transferring image i am using TFTP mechanism.

AshiGupta

post116551: WLAN Commandes tön started after install 6.5

2016-07-18T13:56:22Z

Hallo,

My English is very easy - nötig Perfect.

I have install 6.5 on a SSD and it is runing. But WLAN can i not install. What command is it? Ifconfig lo0 and than?

2. Question. Have QNX no Manpages?

Thanks

post116494: Re: help!!!!!!!Unable to access /dev/hd0t179

2016-06-29T13:02:41Z

Hello,

I am new to qnx. I am trying to boot my x86 generic BSP image file for QNX 6.6 on to my i7 4th generation target hardware. but its crashing and its not able to mount /dev/hd0t179 and also show some symbols. if you have any solution,please help me. thanks in advance

post116230: Re: Adding Screen Add on to 6.5.0SP1 image

2016-05-05T17:12:39Z

i gave this a go with an Intel E3825 platform - which is virtually identical to the Nexcom platform.

The screen functionality initializes, but the screen just goes black, and the OS locks up. No debug information.

Not having much luck with this alternate hardware either.

post116219: Re: Adding Screen Add on to 6.5.0SP1 image

2016-05-04T17:21:07Z

Thanks Dave,

I have a board with the same family processor as that Nexcom thing.  I'll give that a go.  If that works, then the screen driver only supports that vintage CPU.  It would suck to start a new project with a 3 year old processor that's halfway through it's product life, but custom driver development is not really an option at this point.

Comparison Chart (nexcom vs the N3010 one I'm working with):

CPU         E3827              N3010

Family         Bay Trail          Braswell

Release         Q4'13              Q1'16

Graphics Intel® HD Graphics Intel® HD Graphics 400

Ethernet         Intel@ Ethernet I210 Series Intel@ Ethernet I210 Series

Audio           Realtek H.D.A. Realtek ALC888S-VD2-GR

(formatting is pretty crappy, no options to change font or add table. - sorry)

post116218: Re: Adding Screen Add on to 6.5.0SP1 image

2016-05-04T17:10:55Z

The BSP for the Nexcom board only supports that board, so you will have to make some modifications to the build file that are specific to the hardware on your board. No other x86 board is currently supported for 6.5.0 SP1 Screen product. It may or may not be possible to boot any other boards, certainly the GPU would have to be compatible, if it is not, then a custom driver would need to me written.

post116217: Re: Adding Screen Add on to 6.5.0SP1 image

2016-05-04T16:26:04Z

Thanks Dave,

That was a reasonable suggestion.  I downloaded and loaded up that Nexcom BSP into Momentix.  The good news was the .ifs file booted, with output to the console.

The screen didn't work - I see the libraries and calls in the .bsh file for it - it failed pretty silently

USB didn't work.  Not sure what combination of  uhci, ahci, ohci, xhci does the trick  - I'm still monkeying around with that.

The screen not working seems like it could be a black hole of trying to find out why with the limited documentation, error messages, etc.  The Nexcom platform is pretty old, but the BSP files are dated much later than the release of that hardware - so I am assuming there is a chance they could support something newer.

Oh well - the QNX efforts and struggles continue....

post116196: Re: Adding Screen Add on to 6.5.0SP1 image

2016-05-02T17:58:39Z

Dan,

If you would like to try it on your board, while not supported, you can certainly see what needs to be included for Screen.

The documentation really exists as BUILD files for the supported board, which you can access from the BSP and Drivers project on Foundry.

Two build files are included as part of the Nexcom BSP, one with Screen and one without Screen. By comparing the two build files, you will be able to see what additional components need to be included and any path specific or env variables that need to be set.

I have provided a link to the Nexcom VTC1010 BSP (QNX 6.5.0 SP1):

http://community.qnx.com/sf/frs/do/listReleases/projects.bsp/frs.nexcom_vtc1010

You will also find a BSP Users Guide that may be of some help but note that many of the instructions are specific to the VTC1010 board.

I hope that helps,

Dave

post116192: Re: Adding Screen Add on to 6.5.0SP1 image

2016-04-29T19:43:09Z

It is intentional from the perspective that you need support for the specific GPU in order to run Screen. Only the boards mentioned in the Release notes currently have Screen support for QNX 6.5.0 SP1. For those two boards, one ARM, one x86, there is a BSP with a build file. Building that IFS will result in an image with Screen support included.

post116190: Re: Adding Screen Add on to 6.5.0SP1 image

2016-04-29T19:29:16Z

Thanks Dave,

no it's not.

Nexcom VTC-1010 - This is Bay Trail Intel platform launched in 2013

NXP i.MX6D/Q SABRE --- This one is ARM based  - totally difference

My platform is based off the Intel Brawell Celeron N3010 - came out in Q1  2015.  It's about as generic as generic gets in x86 Intel world.

So I would test it - but my original problem remains - that the documentation does not tell you how to included it in a project.  That seems to be an intentional oversight.

post116189: Re: Adding Screen Add on to 6.5.0SP1 image

2016-04-29T19:08:18Z

From the Release Notes posted with the Screen for 6.5.0 SP1 download:

Screen Graphics Subsystem for QNX SDP 6.5 SP1 is supported on the following platforms:

Nexcom VTC-1010

NXP i.MX6D/Q SABRE Platform for Smart Devices (also known as "SABRE Smart”)

Is your board the Nexcom ?

Dave

post116119: Adding Screen Add on to 6.5.0SP1 image

2016-04-19T14:52:13Z

I have an image I've built in Momentix 4.7 for 6.5.0SP1 (based on the smallusb image). It took a while, but I have the x86 platform booting from the USB stick, and now from the SSD.

I would like to add the Screen functionality, but I don't know where to start. The add-on in installed, and see the screen files and libraries are C:\QNX650\target\qnx6\x86

But I don't see in the docs how to add it - all I see is how to write apps using it?

post115870: Re: Wrong instrucions for building EFS project in Momentics IDE 5.0.1?

2016-02-25T15:46:55Z

This section of the documentation is not applicable for IDE 5.0.1 and is being updated to remove the items that are not longer present in this version of the IDE.

For building EFS, see the entry for mkefs in the Utilities Reference document.

QNX Software Development Platform > Utilities & Libraries > Utilities Reference > M

Sorry for the misleading information in the documenation.

Dave

post115678: Wrong instrucions for building EFS project in Momentics IDE 5.0.1?

2016-02-04T19:07:37Z

I am trying to build an EFS (Flash System Image) from FreeScale iMX6.  Instructions from Documentation here:

http://www.qnx.com/developers/docs/660/index.jsp

To create a flash filesystem project:

  1.  From the main menu, select File > New > Project.

  2.  Expand QNX, then select QNX System Builder Project in the right. Click Next.

   3. Name your project and click Next.

   4. Specify whether you want to import an existing buildfile or create a generic file.

    5.Specify your target hardware (e.g., armle-v7).

   6. Click Finish. The IDE creates your new IFS project, which includes a generic .ifs image.

   7. In the editor, use the Add New Image icon in the System Builder editor's toolbar to create a new image element:

    8.To add an EFS image to the new IFS project, select either the option to import an EFS buildfile, or to create a generic EFS model.

    9.Now, that you have two images in the project, remove the empty IFS image that was created by default.

-------------------------------------------------------------------------------------------------------------------------------------------

In step 6. The project doesn't create .ifs image, no images are created. If I clean/build, I get a .raw image

In Step 7. I don't see an new image icon or add new image feature in menu. I am in the QNX System Builder perspective. The image options under File menu, are new " add QNX build image", which if I select and click finish, I get Illegal Thread Access Error.

post115575: Re: Add linear algebra libraries as ATLAS or BLAS

2016-01-20T16:27:57Z

> Hi,

>

> for a special project, I have to compute some simple matrix and vector

> operations as scalar product and matrix-matrix-multiplication. As computing

> these operations is way faster using libraries like BLAS for example, I would

> like to add those to my project. They shall be computed on a BeagleBone Black.

>

> You can find these libraries online in .tar or .lib format. But as far as I

> know, QNX can only include .a (static) or .so(dynamic linking). On top of that

> , I am concerned if it is generally possible to include such libraries because

> they are written in FORTRAN. I am new with QNX and very grateful for your

> help!

> Best regards,

> Tim

Sounds like a cool project. But, yeah, you would need to compile the library to run on QNX and unfortunately we don't have a Fortran compiler.

post115574: Re: Add linear algebra libraries as ATLAS or BLAS

2016-01-20T16:23:24Z

No you cannot use libraries for fortran on QNX, unless you find a translator which will convert them to

C code which you can compile using qnx toolchain

post115569: Add linear algebra libraries as ATLAS or BLAS

2016-01-20T09:27:27Z

Hi,

for a special project, I have to compute some simple matrix and vector operations as scalar product and matrix-matrix-multiplication. As computing these operations is way faster using libraries like BLAS for example, I would like to add those to my project. They shall be computed on a BeagleBone Black.

You can find these libraries online in .tar or .lib format. But as far as I know, QNX can only include .a (static) or .so(dynamic linking). On top of that, I am concerned if it is generally possible to include such libraries because they are written in FORTRAN. I am new with QNX and very grateful for your help!

Best regards,

Tim

post115415: Re: Issues on building QNX 6.6 IFS/EFS image through Momentics

2016-01-06T14:27:25Z

6.6 version does not have graphical editor in the system builder. You add a binary but typing binary's file name in the build file

BSP usually have build file its either called "build" or have ".build" extension.

.project file is there but its invisible by default, you don't really need to look at it. project.bld file won't be created in this version.

IDE will call make to build an image it should have same result as calling make on command line

Instead of creating new system builder project you need to use Import BSP Project wizard which will set it all up correctly

post115412: Re: Issues on building QNX 6.6 IFS/EFS image through Momentics

2016-01-06T03:44:41Z

Thanks for your reply!!!

I have been stuck in this issue for couples of days, the tutorial in the Momentics is also incorrect, hope QNX can release the correct document and Momentics as soon as possible.

I think the best and most applicable way now is building through command.

post115406: Re: Issues on building QNX 6.6 IFS/EFS image through Momentics

2016-01-05T16:29:18Z

Answers embedded below:

> Dear all,

>

> I'm new to QNX 6.6 and trying to build a x86 image. I installed QNX Momentics

> IDE on Ubuntu 14.004, and downloaded the latest x86 BSP from "http://community

> .qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/X86Bios".

>

> By following the instruction of the BSP document, I can build a ".bin" image

> through command-line without Momentics IDE and deploy it on a USB flash..

>

> However, I got some problem on building it through IDE

> (A) Where is the project related files? After I create a QNX system builder

> project by import the setting of the x86 BSP. According to the document "IDE

> User's Guide_.pdf", there should be a ".project" & "project.bld" file, however

>  I didn't find these at all.

Unfortunately this pdf refers to features found only in the previous version of QNX System Builder perspective.  The QNX System Builder perspective include in Momentics 6.6 is really a graphical front end for the mkifs tool that includes an editor for editing the build files.

This issue has been noted and is scheduled for correction in a future documentation release.

>

> (B) How to add binary? How to create a efs?

> For adding binary or create a efs image, I need some icon in the System

> Builder editor's tool bar, like "Add new binary" or "Add New Image", but I

> didn't see these icons in the tool bar.

The icon bar does not exist in the 6.6 version of the QNX System Builder perspective.  Adding binaries, files, libraries etc is done by editing the build file, mush the same way as it is done for the command line version of building images.

Creating efs is easiest done from the command line.  You could however also do this by modifying the Makefile but this would be somewhat more cumbersome than simply using the command line tools for building efs images.

>

> (C) IFS is .bin or .raw?

> By using the command-line, the image I built is ".bin", but the image I built

> from Momentics IDE is ".raw". I have no idea about how to deploy this image to

>  USB flash or hd.

You can deploy the .raw image the same way that you deployed the .bin image built from the command line.  You could if you wanted simply rename the .raw file and give it the .bin extension (or more common .ifs extension) for your convenience, the image file contents would remain the same.  If you would prefer that the file be built with your preferred  file extension, you can edit the project's Makefile to create the image with the extension of your choosing.

Cheers

- Dave

post115384: Issues on building QNX 6.6 IFS/EFS image through Momentics

2015-12-31T07:17:00Z

Dear all,

I'm new to QNX 6.6 and trying to build a x86 image. I installed QNX Momentics IDE on Ubuntu 14.004, and downloaded the latest x86 BSP from "http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/X86Bios".

By following the instruction of the BSP document, I can build a ".bin" image through command-line without Momentics IDE and deploy it on a USB flash..

However, I got some problem on building it through IDE

(A) Where is the project related files? After I create a QNX system builder project by import the setting of the x86 BSP. According to the document "IDE User's Guide_.pdf", there should be a ".project" & "project.bld" file, however I didn't find these at all.

(B) How to add binary? How to create a efs?

For adding binary or create a efs image, I need some icon in the System Builder editor's tool bar, like "Add new binary" or "Add New Image", but I didn't see these icons in the tool bar.

(C) IFS is .bin or .raw?

By using the command-line, the image I built is ".bin", but the image I built from Momentics IDE is ".raw". I have no idea about how to deploy this image to USB flash or hd.

post115036: Re: mig4nto.qpr installation

2015-11-17T14:49:51Z

I don't think mig4nto.qpr is supported anymore. A qpr file is basically a tar file with some extra stuff, but we no longer provide the package manager that works with that type of archive. Even if you do manage to install it, you might not be able to use the contents. Your best bet is to read the Migration Guide that accompanies that archive, or see this appendix in Getting Started With QNX Neutrino:

http://www.qnx.com/developers/docs/6.5.0SP1/neutrino/getting_started/s3_qnx2nto.html

You might also want to try the Quickstart Guide:

http://www.qnx.com/developers/docs/6.5.0SP1/momentics/quickstart/about.html

Good luck, and welcome to QNX Neutrino!

post115015: mig4nto.qpr installation

2015-11-14T10:35:27Z

I used QNX4.25 and now it's time to migrate on QNX6

I've read migration guide, installed qnx6.5 SDP (win32 host).

But now i can't undestand how i should install mig4nto.qpr on this platform?

I don't see any way ;(((

Please explain in what way i can use mig4nto.qpr. Thanks.

post114506: Deploying Program to Target System

2015-09-24T07:15:46Z

Hi I'm new to QNX and Im trying to get the default "hello world" style program to run on QNX Neutrino (on a virtual machine, development is on the Windows Host). My question is how do I bring the release version of the program to my QNX target so i can start it from the command line? Also information on the "qconn" would be helpful. Does this allow eclipse to test-run the programs over the network on the target system?

Thanks for your help

post114307: RE: I'm seeing popups with 'ctrl-v', etc. to click on to complete keystroke

2015-08-19T19:54:40Z

Sorry, does not work. I even deleted everything in that .settings directory, and it still happens after starting. I already have 3 workspaces, and it happens regardless of which I use (the other two I haven't used in months since long before this began.)

So it must be some setting independent of workspace settings.

Best Regards,

Kevin

-----Original Message-----

From: David Cummings [mailto:community-noreply@qnx.com]

Sent: Tuesday, August 18, 2015 12:44 PM

To: momenticsgs-community

Subject: Re: I'm seeing popups with 'ctrl-v', etc. to click on to complete keystroke

Hi Kevin,

Sorry to hear that you are having trouble. From what you are explaining this unfortunately looks like a bug in Eclipse (which Momentics is built upon). Which version of Momentics are you using?

Creating a new workspace should solve all your problems, although that could be a lot of work depending on your configuration.

Alternatively, you might have some success with the preference file: <workspace_location>/.metadata/.plugins/org.eclipse.core.runtime/.settings/org.eclipse.ui.workbench.prefs

It contains all of the custom key bindings you've set (under the key org.eclipse.ui.commands). Have a look into there to see if there's anything that stands out (perhaps duplicate entries?) that could be cleaned up.

If you do decided to try and edit this file, before you do so please backup your workspace.

Thanks,

David

_______________________________________________

QNX Momentics Getting Started

http://community.qnx.com/sf/go/post114290

To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

Nothing in this message is intended to constitute an electronic signature unless a specific statement to the contrary is included in this message.

Confidentiality Note: This message is intended only for the person or entity to which it is addressed. It may contain confidential and/or privileged material. Any review, transmission, dissemination or other use, or taking of any action in reliance upon this message by persons or entities other than the intended recipient is prohibited and may be unlawful. If you received this message in error, please contact the sender and delete it from your computer.

post114290: Re: I'm seeing popups with 'ctrl-v', etc. to click on to complete keystroke

2015-08-18T16:43:47Z

Hi Kevin,

Sorry to hear that you are having trouble. From what you are explaining this unfortunately looks like a bug in Eclipse (which Momentics is built upon). Which version of Momentics are you using?

Creating a new workspace should solve all your problems, although that could be a lot of work depending on your configuration.

Alternatively, you might have some success with the preference file: <workspace_location>/.metadata/.plugins/org.eclipse.core.runtime/.settings/org.eclipse.ui.workbench.prefs

It contains all of the custom key bindings you've set (under the key org.eclipse.ui.commands). Have a look into there to see if there's anything that stands out (perhaps duplicate entries?) that could be cleaned up.

If you do decided to try and edit this file, before you do so please backup your workspace.

Thanks,

David

post114289: Re: I'm seeing popups with 'ctrl-v', etc. to click on to complete keystroke

2015-08-18T16:30:59Z

tl;dr I hit ctrl-c to copy, and a lil' yellow overlay pops up in the lower right corner of the IDE window. I have to click it to do the copy.

Make it go away so ctrl-c just does copy.

post114275: I'm seeing popups with 'ctrl-v', etc. to click on to complete keystroke

2015-08-17T20:30:47Z

I wanted to change QNX Momentics IDE to use Visual Studio (hoping it would do things like ctrl-x to cut, etc, and ctrl-shift-f to find in files.)

Now when I hit a control key chord, say, ctrl-x to cut, a little overlay in the lower right pops up with what it is, "Cut", and the key, "ctrl-x".  I HAVE TO CLICK ON IT TO DO THE CUT.

If I go to a field, say, the search box field, and do ctrl-v to paste, it does the exact same thing.

At one time I did ctrl-shift-f to find, and it popped up two different things to choose from.  I suspect this "helpful" feature turned on this, but it doesn't go off any more.

I changed the keyset back to default from Microsoft Studio and then also clicked the "reset keys to default" button on the dialog, but target remains, Mr. President.  Target remains.

I am pulling my hair out of this "feature" as it gets in the way of key shortcuts by un-shortcutting them by inser oh I give up.

How do I actually get rid of it?

post114260: sqrt in Momentics

2015-08-13T13:20:02Z

Hi, I'm having issues with the sqrt() function in Momentics.

Example:

double x = sqrt(2); does not work.

double x = sqrt(2.0); works.

double a = 2.0;

double x = sqrt(a); does not work.

When I say it does not work, I mean it wont build at all.

I am using C++.

Can anyone help me with this issues?

post114252: Re: How start qnx? MyEnglish is bad - i am German

2015-08-11T19:29:28Z

root is the default username, leave the password blank as it is not set. Once you login, you can set your own password (and create new users)

post114164: Re: How start qnx? MyEnglish is bad - i am German

2015-07-27T10:26:03Z

I see at many Screenshots a login-Window. There can i give User root and no Password. and this Screen i search for this Question in Forum.

How start this Sceen?

post114133: Re: How start qnx? MyEnglish is bad - i am German

2015-07-15T17:32:54Z

If you are trying to get to the development tools in the IDE, click on the icon button marked Workbench on the lower right-hand side of your screen as captured in your second image.

post114132: Re: How start qnx? MyEnglish is bad - i am German

2015-07-15T17:29:41Z

Still not clear on what exactly you are trying to do?

You have installed the development tools, both command tools and IDE tools.

What are you now attempting to do?

post114111: Re: How start qnx? MyEnglish is bad - i am German

2015-07-13T21:26:01Z

Next Shot from IDE:

post114110: Re: How start qnx? MyEnglish is bad - i am German

2015-07-13T21:20:02Z

Hello,

hier a Screenshot.

post114109: Re: How start qnx? MyEnglish is bad - i am German

2015-07-13T19:38:59Z

You have installed the QNX Momentics SDP, primarily the IDE based development tools.

Are you trying to start the IDE?

post114102: Re: How start qnx? MyEnglish is bad - i am German

2015-07-11T22:26:25Z

I find a Name "phlogin" and login. But the Linux bash say no File found to start.

Who can i login ? Than give User root and no Password.

On the Prompt:

# and then the Command to login?????

post114101: Re: How start qnx? MyEnglish is bad - i am German

2015-07-11T21:26:48Z

Hello,

i search not the IDE for Programming.

I search the start File for Desktop. "win.com" "startx" etc. What is the name of File QNX??

When a System booting, it calling a start-File, what the Name is it???????

Thanks

I have Debian 8 no Machine Virtual.

post114096: Re: How start qnx? MyEnglish is bad - i am German

2015-07-10T13:58:34Z

What you've installed is a development system where you can write your code; you'll need another machine or VMware where you can run QNX Neutrino and your programs. Here's a link to a short tutorial that I hope will help you:

http://www.qnx.com/developers/docs/6.5.0SP1/momentics/quickstart/about.html

Good luck!

post114095: How start qnx? MyEnglish is bad - i am German

2015-07-09T17:06:28Z

Hello,

i have install 6.5 on Debian.

How can login? What File calling to login?

Thanks

post114046: Re: No commands/ftp on Pandaboard ES

2015-06-30T10:50:20Z

Oh wow, apparently I stopped checking the folder before temp or I didn't check it at all. Anyway I could copy something to it via Mementics and back to my workspace. Thank you very much, I'm a newbie on this topic.

post114044: Re: No commands/ftp on Pandaboard ES

2015-06-29T14:03:33Z

Where are you trying to copy? You cannot copy over ifs because it is read only, also your / may be read only.

Try to copy to /tmp

post114041: Re: No commands/ftp on Pandaboard ES

2015-06-29T08:45:42Z

Or "Copy operation error: *filename*

No such file or directory"

post114040: Re: No commands/ftp on Pandaboard ES

2015-06-29T08:43:40Z

Well I can connect, but I cannot copy anything. I get the error "Copy operation error: *filename* - Permission denied"

I'm already conencted as root :-(

post114039: Re: No commands/ftp on Pandaboard ES

2015-06-29T08:39:35Z

unfortunately I cannot connect over the IDE :-/

post114032: Re: No commands/ftp on Pandaboard ES

2015-06-26T19:25:02Z

You can modify the build file to add the commands you wish to have available on the board.

I do see that ftp is part of the standard IFS image that boots the board. (mkdir is not and would need to me added).

You can also use the QNX Momentics IDE and connect to the board over ethernet using qconn.

post114026: No commands/ftp on Pandaboard ES

2015-06-25T11:05:03Z

I'm working with QNX 6.5 SP1 and a Pandaboard ES. I'm reading via serial port and can ping it via Ethernet as well. Start Up seems pretty ok, no error messages. I'm missing standard commands like mkdir, cp,... et cetera. In addition I also cannot connect to the board via FTP (using Filezilla). Is this normal for the BSP? I had no problems like this with the beagleboard BSP (obvs on a beagleboard).

Pls help me or ask if you need any more information about this problem of mine.

Thanks

Bjoern

post113913: Re: QNX neutrino RTOS 6.6 installation problem on VMWare

2015-06-02T20:01:23Z

Copy the ISO that you downloaded to your hard drive (rather than your CD drive).

When prompted by VMWare, tell it that you have a CD image (ISO) that you would like to boot from.

Should succeed from there.

- Dave

post113811: Re: QNX neutrino RTOS 6.6 installation problem on VMWare

2015-05-13T20:18:36Z

Download new iso file, tried it still had same errors, please let me know if have any other suggestion.

Thanks

post113810: Re: QNX neutrino RTOS 6.6 installation problem on VMWare

2015-05-13T18:55:02Z

You downloaded .iso file? Try to re-download maybe image is corrupted

On 15-05-13 01:48 PM, Loc Nguyen wrote:

> Hi,

> I have downloaded the VMWare image of QNX neutrino runtime system and tried to install it on VMWare. Currently I am getting some error while installing QNX neutrino RTOS on VMWare. Here I am attaching the screenshots of the error

> I am using USB CD it can boot, but some how it can't mount the CD

> Thanks

>

>

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post113809

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post113809: QNX neutrino RTOS 6.6 installation problem on VMWare

2015-05-13T17:48:34Z

Hi,

I have downloaded the VMWare image of QNX neutrino runtime system and tried to install it on VMWare. Currently I am getting some error while installing QNX neutrino RTOS on VMWare. Here I am attaching the screenshots of the error

I am using USB CD it can boot, but some how it can't mount the CD

Thanks

post113762: Re: Unable to reinstall QNX6.6. Gettting already installed error

2015-04-30T17:42:56Z

For folks who are unable to find the "Zero G Registry" folder, it is found under C:\Program Files (x86)

post113577: Re: How can I get a Non-commercial license

2015-03-20T14:37:54Z

How can one start developing for an OS which doesn't even provide tools to developers to start without any upfront costs? Is it too much to ask for?

I've been a QNX developer and standalone evangelist and have persuaded many companies to start using it as platform. But with us developers themselves blocked, how can one even suggest others to use it?

post113558: Re: Problems with remote debugging

2015-03-17T00:41:51Z

I ran into this problem on ubuntu 14.04 (x86_64 64bit).

I *solved* it by downloading oracle linux jdk 8 32 bit (since the IDE is 32bit), at this time the current file is 'jdk-8u40-linux-i586.tar.gz' , Java SE Development Kit 8u40 and installing it into some *non-system* directory:

sudo mkdir -p /opt/oracle/jdk/32bit/

sudo tar xf jdk-8u40-linux-i586.tar.gz -C /opt/oracle/jdk/32bit

I then changed the qnx660-env.sh script to *not* include the path to the qnx bundled java, instead use the new one:

PATH=/opt/qnx/6.6.0/host/linux/x86/usr/bin:/opt/qnx/6.6.0/.qnx/bin:$PATH

# oracle jdk

PATH=/opt/oracle/jdk/32bit/jdk1.8.0_40/bin:$PATH

Adapt to your system (you probably have a different qnx install path ). It might also work with just the JRE.

enjoy,

Nuno

post113229: Low power managment on QNX 6.6

2015-02-05T09:30:59Z

Hi,

How to control the power management for the device with USB connected? Which tools can we use.

Or Do we need to develop application to control it? Thanks.

Regards,

Hubery.

post113123: How to write Applications for QNX Connected Car Hardware

2015-01-28T20:45:53Z

I am planning to write applications to run on QNX Connected car. I already setup QNX SDP and

QNX target on my machine. But I can not still get what else I need to proceed further.

1. which IDE should I use for this? QNX Momentics or Eclipse or something else?

2. Do I need to buy a QNX hardware board for connected car development, or Target created on VMware would be sufficient?

3. Do I need to purchase any license for connected car development?

Thanks

Shiva

post112897: Is the QNX Momentics SDK repository down? Or if not, need PEBKAC help...

2015-01-10T17:46:47Z

So I wrote all the below, but then tried install on a totally different (Windows 8) system, and had the same exact problem. Which leads me to believe the QNX server is down or misconfigured at the moment. Could someone confirm?

And if so, is there any way to install the SDK from local files?

Evaluation license days left becoming annoyingly low due to this :-/

~~

"No repository found" when trying to install SDK in Momentics

I download and install Momentics (from the 6.6 DVD), when it starts up prompts me to install some SVN and Java stuff, that works no problem, also says I need to install SDK. Specifically this is in Momentics 5.0.1 Build v201402230336 running under Windows 7 64-Bit, all latest updates applied.

I go to Help -> Install New Software... and under "Work with:" select "QNX Momentics Update Site - https://www.qnx.com/account/updates/foundry27/ide/5.0/"

Then get this in the big white box with the "Name" and "Version" columns:

Could not find https://www.qnx.com/account/updates/foundry27,

Also I've seen elsewhere, sorry but forget exactly when:

No repository found at https://www.qnx.com/account/updates/foundry27/ide/5.0/'

~~

Some other facts about this install:

(a) It was actually working when I first installed it.

(b) I might have messed it up when I also installed Momentics for BlackBerry 10

(c) I've reinstalled it, no help.

(d) But the "http://community.polarion.com/projects/subversive/download/eclipse/3.0/juno-sr2-site/" repo works fine, which leads me to believe the problem is QNX-specific.

post112826: Re: QNX SDP 6.5.0 disk boot falilure on PCM-4153FZ2

2015-01-05T16:52:46Z

Hi Elena.

Thank you for your interest.

My CD contains QNX SDP 6.5.0 for x86 boards only. While trying to install it

an information appears on the screen that tere is not enough space on disk

(in my case: 1GB NAND flash accessed via EIDE interface).

I abandoned automatic installation idea and I have read manual about

building OS images.

After couple of days of fighting I eventually managed to build OS image and

transfered it to flash storage of PCM-4153. For now there are only few

components working like: console, eide driver and file system, serial ports,

network interface as well as some system commands (ls, pwd, cp, ifconfig

pidin etc.). The installed system is also accessed via LAN from Momentics

IDE which is installed on Windows host.

I have also attached PCM-3680I CAN interface card to PCM-4153, run its

driver and it is working too. I have achieved what I wanted namely

controlling Maxon motor with EPOS2 controller via CAN interface.

I have still much to learn with bilding OS images but first steps are behind

me

Kind regards,

Marcin.

post112816: Re: QNX SDP 6.5.0 disk boot falilure on PCM-4153FZ2

2015-01-05T14:18:01Z

Does this image has everything or x86 only?

On 15-01-01 06:19 AM, Marcin Morawski wrote:

> Hi everyone.

>

> My satisfaction turned out to be premature. Although QNX launched from CD there is not enough space in embedded NAND flash (only 1GB) to install the system on it.

> Here's my question. Is there any method to install only selected components of the QNX 6.5.0 directly from CD in order to fit it in 1GB storage leaving some memory for user programs and data?

>

> I have no experience yet in building OS images using Momentics IDE. Is there simpler method?

>

> Kind regards,

> Marcin

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post112800

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post112800: Re: QNX SDP 6.5.0 disk boot falilure on PCM-4153FZ2

2015-01-01T11:19:53Z

Hi everyone.

My satisfaction turned out to be premature. Although QNX launched from CD there is not enough space in embedded NAND flash (only 1GB) to install the system on it.

Here's my question. Is there any method to install only selected components of the QNX 6.5.0 directly from CD in order to fit it in 1GB storage leaving some memory for user programs and data?

I have no experience yet in building OS images using Momentics IDE. Is there simpler method?

Kind regards,

Marcin

post112799: Re: QNX SDP 6.5.0 disk boot falilure on PCM-4153FZ2

2015-01-01T10:42:51Z

Hi everyone.

In case someone will have similar difficulties, I have managed to solve the problem. Apparently QNX does not want to boot from USB-CDROM.

In my PCM-4153FZ2 there is IDE interface but it is using 44-pin ribbon cable (notebok type hdd's). I had to make 40 pin IDE cable in order to attach good old-fashioned 5,25' CD-ROM drive.

After switching boot priority to CD-ROM in bios, QNX booted nicely.

Kind regards,

Marcin

post112797: QNX SDP 6.5.0 disk boot falilure on PCM-4153FZ2

2014-12-30T18:48:07Z

Hi Everyone.

I have got some experience in QNX RTOS installed on PCM-3362 single board computer but recently I've encountered a problem while trying to install the same system on PCM-4153FZ2 single board computer.

I was trying to install QNX RTOS from bootable CD using CD-ROM connected via USB. This information appeared on the screen:

Boot from CD:

1. FD 2.88MB System Type-(00)

DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRES ENTER

Boot priority seems to be properly set in BIOS because WindowsXP is booting correctly from the same CD-ROM. Furthermore this QNX CD is booting correctly on my laptop and on PCM-3362 as well.

Does anyone have any idea what might be the problem?

Is it because quite poor hardware specification this PCM-4153 SBC?

Computer parameters are as follows:

AMD Geode LX800 500MH,

512MB RAM,

1GB onboard Flash NAND drive.

Detailed specification can bound here:

http://www.advantech.com/products/1-2JKLTU/PCM-4153/mod_A8209479-19F4-47AD-8446-84FBD131D005.aspx

I will appreciate any help on this.

Kind regards.

Marcin.

post112781: How to enable cppchek in QNX Momentics IDE?

2014-12-26T10:10:56Z

I can installed it successfully, but I cannot find "cppcheclipse" in Preference-->C/C++

post112376: Re: devc-serusb

2014-11-19T21:00:24Z

devc-serusb is a standard driver and ships with the QNX Neutrino SDP 6.6.0 .

You will find it in your base installation directory qnx660/target/qnx6/armle-v7/sbin

Dave

post112350: Re: devc-serusb

2014-11-15T08:41:36Z

Hi,

I am trying to port usb-to-uart, but i could find devc-serusb in my BSP,

so can anyone tell me where i can find or which BSP has this devc-serusb.

currently i am using iMX6 processor

BSP:BSP_freescale-imx6q-sabrelite_br-660_be-660_SVN737103_JBN5

Maddy

post112052: Re: RE: No _IO_CONNECT not being sent to server on name_open()

2014-10-15T18:46:53Z

Or in the case of name_close(), when the last name has been closed between the client process and the server process. Each name_open() from the client process to a name that is serviced by the same server process represents a connection (coid) and a client-server relationship between the client process and the server process. Only when all the client-server relationships between the client and server have been severed, will the disconnect pulse be sent by the kernel.

Hope that makes sense.

post112050: Re: RE: No _IO_CONNECT not being sent to server on name_open()

2014-10-15T18:41:51Z

You would not get a disconnect pulse until all connections from a client process are closed. So not from each ConnectDetach() but when ConnectDetach() is called for the last coid between the client process and the server process.

post112040: Re: RE: No _IO_CONNECT not being sent to server on name_open()

2014-10-14T06:10:42Z

Thank you very much Dave Nickerson.

Now I have next problem:

some clients connect to server (each client uses name_open() that set connecton to the server)

then if the client disconnect from server (use name_close() ) I don't receive _PULSE_CODE_DISCONNECT.

I receive this pulse only when last client disconnect. i.e.

client 1 connect - OK

client 2 connect - OK

client 3 connect - OK

client 3 disconnect - have not  _PULSE_CODE_DISCONNECT

client 2 disconnect - have not  _PULSE_CODE_DISCONNECT

client 1 disconnect - have _PULSE_CODE_DISCONNECT

Although in this site http://www.qnx.com/developers/docs/6.5.0/index.jsp

the article about name_attach() says:

"    case _PULSE_CODE_DISCONNECT:

               /*

                * A client disconnected all its connections (called

                * name_close() for each name_open() of our name) or

                * terminated

                */"

I correct understand that each time when I call "name_close()" will be generate  _PULSE_CODE_DISCONNECT?

or I am wrong?

Thank you

post112012: Re: RE: No _IO_CONNECT not being sent to server on name_open()

2014-10-09T18:33:54Z

By default name_attach () creates a channel with three flags set, one is the _NTO_CHF_DISCONNECT

Remove the ChannelDestroy and the ChannelCreate call from your code and you should be goog.

> Hello.

>

> I have a similar problem, but my server don't receive _PULSE_CODE_DISCONNECT.

>

> server:

> attach = name_attach(NULL, ATTACH_POINT, 0);

> ChannelDestroy(attach->chid);                     // here I try to set flag "

> _NTO_CHF_DISCONNECT"

> attach->chid = ChannelCreate(_NTO_CHF_DISCONNECT)

> while ( 1 )

> {

>    rcvid = MsgReceive()

>    if ( rcvid == -1)

>    {}

>    else if ( rcvid == 0 )

>    {

>       switch ( RxMsg.Mypulse.code)

>       {

>             case 0:

>                      // pulse from timre; it is work

>             case _PULSE_CODE_DISCONNECT:

>                      // doesn't work

>        }

>      else

>       {

>           // parsing message, it is work

>        }

> }

>

> client:

> server_coid = name_open(ATTACH_POINT, 0)

> while ( <condition> )

>  {

>      status = MsgSend()

>   }

> name_close(server_coid);

>   // when executed this line, server don't receive _PULSE_CODE_DISCONNECT

>

> Moreover, I try why running "gns" and whiout it.

>

> Anybody know how it is possible to decide this problem?

>

> THANK YOU VERY MUCH

post111998: Re: RE: No _IO_CONNECT not being sent to server on name_open()

2014-10-09T07:07:51Z

Hello.

I have a similar problem, but my server don't receive _PULSE_CODE_DISCONNECT.

server:

attach = name_attach(NULL, ATTACH_POINT, 0);

ChannelDestroy(attach->chid);                     // here I try to set flag "_NTO_CHF_DISCONNECT"

attach->chid = ChannelCreate(_NTO_CHF_DISCONNECT)

while ( 1 )

{

   rcvid = MsgReceive()

   if ( rcvid == -1)

   {}

   else if ( rcvid == 0 )

   {

      switch ( RxMsg.Mypulse.code)

      {

            case 0:

                     // pulse from timre; it is work

            case _PULSE_CODE_DISCONNECT:

                     // doesn't work

       }

     else

      {

          // parsing message, it is work

       }

}

client:

server_coid = name_open(ATTACH_POINT, 0)

while ( <condition> )

{

     status = MsgSend()

  }

name_close(server_coid);

  // when executed this line, server don't receive _PULSE_CODE_DISCONNECT

Moreover, I try why running "gns" and whiout it.

Anybody know how it is possible to decide this problem?

THANK YOU VERY MUCH

post111969: Re: cannot start qde on Fedora 16 x86_64

2014-10-04T13:23:48Z

I got the same error on Debian Wheezy 64bit. To make qde / Momentics 4.7 work you need to install the i386 GTK libs:

sudo apt-get install ia32-libs-gtk

See https://bugs.launchpad.net/ubuntu/+source/swt-gtk/+bug/975560/comments/17

post111927: Re: Cannot begin install

2014-09-30T10:07:57Z

I had the same symptoms on Ubuntu 14.04 but different cause.

It turned out to be that my /tmp folder was mounted with the noexec option.

To fix it I ran:

sudo mount -o remount,rw,exec /tmp

post111609: Re: How can I get a Non-commercial license

2014-09-02T19:11:56Z

If TRUE = indeed.

post111363: Re: qconfig.mk file disappears after installing the 6.5 service pack

2014-08-11T14:04:55Z

We've noticed that the problem with missing files is caused by

1. not logging out/logging back in after installing 6.5.0 and prior to installing 650SP1

2. not using "sudo -E" to launch 650SP1 installer on Ubuntu systems

To fix this installation you would have to:

- use the cleanup utility to remove all 6.5.x from your system.

- install 6.5.0

- log out/ log back in

- "sudo -E ./<650SP1-installer>"

This should resolve the issue.

Natalia

> Same problem here under Ubuntu 12.04. I've also tried "sudo -E" and "-console"

> when installing the service pack but the problem persists.

>

> Has anyone found a solution yet?

post111327: Re: qconfig.mk file disappears after installing the 6.5 service pack

2014-08-06T15:01:55Z

Same problem here under Ubuntu 12.04. I've also tried "sudo -E" and "-console" when installing the service pack but the problem persists.

Has anyone found a solution yet?

post111056: Re: How can I get a Non-commercial license

2014-07-15T02:40:49Z

just got the official reply, there is no Non-commercial license anymore :(. what a pity!

post110969: Re: installation problem -> null\Fonts

2014-07-08T09:37:58Z

how can you solve this problem.I also have this problem when I uninstall QNX SDP 6.5.0.

post110920: How can I get a Non-commercial license

2014-07-03T05:35:39Z

Hi All,

I am really interested in QNX development and starting to collecting installation software and documents, but I didn't find a right link in website to apply a non-commercial license. My aim is self-training and personal activities.

I found a link to apply a 30-day evaluation license but it is for commercial projects only.

How can I apply a perpetual non-commercial license for QNX? or there is impossible to get this kind of license which is listed in official license guide. if you want to start to learn QNX, you have to buy a commercial license?

I am a little confused about QNX license. Thank you very much in advance.

Br,

Daniel

post110733: Re: Using GNU Library functions with QNX Momentics

2014-06-17T23:19:29Z

I wasn't able to find one already ported but I can try and compile it myself.

Thanks

post110720: Re: Using GNU Library functions with QNX Momentics

2014-06-17T19:05:45Z

First you need to compile this library for qnx, or find if somebody else

ported it already.

Then you just follow standard docs on how to include library in your

build system

On 14-06-17 02:23 PM, Kevin Lynch wrote:

> The GNU Scientific Library, specifically the functions for creating polynomial fits to data sets.

>

> https://www.gnu.org/software/gsl/manual/html_node/Multi_002dparameter-fitting.html

>

> The problem I am addressing right now is determining the a,b,c values of a least squares polyfit

> y=ax^2+bx+c

>

> for a set of ten x and y data points. This is part of a control loop running at 1000 Hz, so the computation needs to be done pretty quickly.

>

>

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post110719

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post110719: Re: Using GNU Library functions with QNX Momentics

2014-06-17T18:23:57Z

The GNU Scientific Library, specifically the functions for creating polynomial fits to data sets.

https://www.gnu.org/software/gsl/manual/html_node/Multi_002dparameter-fitting.html

The problem I am addressing right now is determining the a,b,c values of a least squares polyfit

y=ax^2+bx+c

for a set of ten x and y data points. This is part of a control loop running at 1000 Hz, so the computation needs to be done pretty quickly.

post110717: Re: Using GNU Library functions with QNX Momentics

2014-06-17T17:18:01Z

What GNU Library you are talking about?

On 14-06-17 01:09 PM, Kevin Lynch wrote:

> I have a C project where I would like to use some of the functions from the GNU Library in an embedded system. How might I set up QNX Momentics so that I can access the GNU Library functions?

>

> Thanks

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post110716

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post110716: Using GNU Library functions with QNX Momentics

2014-06-17T17:09:32Z

I have a C project where I would like to use some of the functions from the GNU Library in an embedded system. How might I set up QNX Momentics so that I can access the GNU Library functions?

Thanks

post110656: Re: QNX SDP 6.5.0SP1 Installation issue (couldn't find appropriate JVM)

2014-06-11T09:44:19Z

Ähm sorry, it seems i've got something wrong here.

The installation I've needed the SDP 6.5.0 installation installed beforehand and I didn't know this.

Sorry for this, I didn't see in the download notes that this was necessary.

Yours sincerely

Adrian

post110655: QNX SDP 6.5.0SP1 Installation issue (couldn't find appropriate JVM)

2014-06-11T09:28:56Z

Hello everyone,

first of all, I hope it's OK that I post my SDP issue here (after all Momentics is part of the SDP) and that this issue wasn't solved and I couldn't find it here.

So my issue is at the beginning of the installation of the QNX SDP 6.5.0SP1 where it can't find the appropriate JVM and it says I should try to install it with the commandline option -is:javahome <JAVA-Outputdirectory> when I tried it with my installed JVM (version 7) the same problem occures.

Here some informations about my systems:

Windows 7 Prof. 64 Bit

Java 7

I hope you can help me. Further I saw in an older thread, that it is possible to create an installation log through the option "-is:log sp1-log.txt" so I want to post the corresponding logfile.

I hope you can help me and if you need further informations I will try to answer all of them.

Yours sincerely

Adrian

post110619: Re: Unable to reinstall QNX6.6. Gettting already installed error

2014-06-06T04:53:55Z

Hi Natalia,

I was able to install 6.6 after removing .com.zerog.registry.xml from Zero G registry. This was not getting located in search box even after enabling show hidden files option. So I manually located xml in Zero G Registry and deleted.

Thanks a lot for your support.

Regards

Thushara Jayakumar

post110604: Re: Unable to reinstall QNX6.6. Gettting already installed error

2014-06-05T14:03:13Z

Hi,

There is no cleanup utility for 6.6.

The only reason you would get an installer error about the product being already installed is if you have another instance of .com.zerog.registry.xml somewhere on your system.   Sometimes this files is placed into "Zero G Regsitry" folder, which is also a hidden folder.

> Hi Natalia

>

> I've followed those steps you mentioned. But still I'm getting same error. I'm

>  wondering if there is any QnxWinCleanup.exe for 6.6 version also like the one

>  for 6.5.

>

> Thanks and Regards

> Thushara.

post110602: Re: TCP/IP Socket listener

2014-06-05T10:35:58Z

You need to link against libsocket.

Sent from my BlackBerry 10 smartphone on the Rogers network.

Original Message

From: Cart Mc'Cormick

Sent: Thursday, June 5, 2014 2:06 AM

To: momenticsgs-community

Reply To: momenticsgs-community@community.qnx.com

Subject: Re: TCP/IP Socket listener

OK so wit this basic tutorial of UNIX

http://cs.ecs.baylor.edu/~donahoo/practical/CSockets/WindowsSockets.pdf

If I compile in QnX6.5 I get the following error.

UNixHeader.o: In function `main':

UNixHeader.c:(.text+0x92): undefined reference to `socket'

UNixHeader.c:(.text+0x10e): undefined reference to `connect'

UNixHeader.c:(.text+0x154): undefined reference to `send'

UNixHeader.c:(.text+0x1a2): undefined reference to `recv'

cc: /usr/qnx650/host/qnx6/x86/usr/bin/ntox86-ld error 1

As you can see they are pretty normal functions that it can refers too..Why cant it compile ?

I use " cc -o xxx xxx.c "

I have tried to UNspaghetti it from the tutorial but got exactly the same results:/

_______________________________________________

QNX Momentics Getting Started

http://community.qnx.com/sf/go/post110595

To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post110601: Re: TCP/IP Socket listener

2014-06-05T10:29:36Z

I didnt compile the program with -socket -.-

post110595: Re: TCP/IP Socket listener

2014-06-05T06:06:07Z

OK so wit this basic tutorial of UNIX

http://cs.ecs.baylor.edu/~donahoo/practical/CSockets/WindowsSockets.pdf

If I compile in QnX6.5 I get the following error.

UNixHeader.o: In function `main':

UNixHeader.c:(.text+0x92): undefined reference to `socket'

UNixHeader.c:(.text+0x10e): undefined reference to `connect'

UNixHeader.c:(.text+0x154): undefined reference to `send'

UNixHeader.c:(.text+0x1a2): undefined reference to `recv'

cc: /usr/qnx650/host/qnx6/x86/usr/bin/ntox86-ld error 1

As you can see they are pretty normal functions that it can refers too..Why cant it compile ?

I use " cc -o xxx xxx.c "

I have tried to UNspaghetti it from the tutorial but got exactly the same results:/

post110594: Re: Unable to reinstall QNX6.6. Gettting already installed error

2014-06-05T04:42:53Z

Hi Natalia

I've followed those steps you mentioned. But still I'm getting same error. I'm wondering if there is any QnxWinCleanup.exe for 6.6 version also like the one for 6.5.

Thanks and Regards

Thushara.

post110581: Re: Unable to reinstall QNX6.6. Gettting already installed error

2014-06-04T13:17:31Z

from the installation notes:

---------------------------------

Note: If the uninstaller doesn't fully remove all the components, do the following:

    Delete the folder where you installed QNX SDP.

    Delete the "QNX Momentics" desktop shortcut and the link in the Start menu.

    Find and delete all occurrences of .com.zerog.registry.xml. This is a hidden file, so you must enable the Show hidden files and folders option.

    Delete the QNX SDP entries from the Add/Remove Program list by choosing Control Panel > Programs and Features from the Start menu, right-clicking on each QNX SDP entry, and then choosing Delete from the list.

-----------------------------

That should fix the problem.

post110571: QNX 6.5.0 runtime installation error

2014-06-04T05:55:46Z

Hi everyone!

Im getting kernel dump when im trying to install my runtime. My PC is Advantech ARK-1122-C-S6A1E. I included photo on that dump to this message. Can anyone help what might be wrong?? :/

post110570: Unable to reinstall QNX6.6. Gettting already installed error

2014-06-04T05:39:51Z

Hi ,

I've already installed the latest version of QNX6.6 in my pc but due to some reasons I had unistalled it . But later when I am trying to re install it I'm getting error message "You must uninstall QNX 6.6 before reinstalling it". I cant get the 6.6 exe listed in my programs list and Ive removed all assoxiated folders for 6.6 from my pc.

Any suggestions in fixing this issue will be greatly appreciated.

Regards

Thushara Jayakumar

post110562: Re: Where i can find screen.h and libscreen.so

2014-06-03T12:32:33Z

BTW.

On Qt5 site, said "Building Qt 5 requires QNX SDP 6.5.0 SP1 from the QNX website and the new QNX UI Core graphics framework (contact QNX for access)."

If so, where can I contact if I have a non-commercial end-user license, to obtain "new QNX UI Core graphics framework"?

post110561: Re: TCP/IP Socket listener

2014-06-03T10:33:37Z

You're running an ancient version of qnx. socketpair() has been available for ‎a long time.

-seanb

Sent from my BlackBerry 10 smartphone on the Rogers network.

Original Message

From: Cart Mc'Cormick

Sent: Tuesday, June 3, 2014 3:24 AM

To: momenticsgs-community

Reply To: momenticsgs-community@community.qnx.com

Subject: Re: TCP/IP Socket listener

Apparently the QnX Libraries are bare minimum.

For instance my "sys/socket.h" in QnX doesn't have the "socketpair" function.

SO even a basic tutorial written for QnX wont work.

Any idea?

_______________________________________________

QNX Momentics Getting Started

http://community.qnx.com/sf/go/post110559

To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post110559: Re: TCP/IP Socket listener

2014-06-03T07:24:38Z

Apparently the QnX Libraries are bare minimum.

For instance my "sys/socket.h" in QnX doesn't have the "socketpair" function.

SO even a basic tutorial written for QnX wont work.

Any idea?

post110554: Re: TCP/IP Socket listener

2014-06-02T14:46:56Z

It is standard Posix API. Any tutorial online will be applicable.

post110553: Re: TCP/IP Socket listener

2014-06-02T13:37:33Z

I am using C and I dont have the QnX library so I code in Eclipse in windows.

Thanks!

post110552: TCP/IP Socket listener

2014-06-02T13:35:31Z

Hi

It there a tutorial for the QnX 6.5 to Code a simple Socket listener using TCP/IP?

I already have the server side up I just need to know more about the libraries QnX uses.

A tutorial would be great!

Thanks and kind regards.

cart

post110551: "Is not a valid C file" on AppBuilder Callback?

2014-06-02T09:20:10Z

Hi

Im having trouble with the AppBuilder.

I create a file in the Browser TAB and choose the template "Callback" it creates a file that generally looks like the callback code.

So now I wan to link it to an ARM event and it want to choose it,it just says that theres nothing there and if I type in the file path to the file it says that its not a valid C file.

Even if I change the file extension to .c it still says the same thing.

post110538: Re: Where i can find screen.h and libscreen.so

2014-05-30T10:49:30Z

> You need to install QNX SDP 6.6, not 6.5.

Thanks.

post110530: Re: 6.5.0 AppBuilder starting nudge

2014-05-29T18:28:05Z

If you want to use the IDE, you'll have to install QNX SDP on a Windows or Linux development host because we don't include the IDE in self-hosted Neutrino systems.

The Photon Programmer's Guide should help you attach your code to the user interface that PhAB (the Photon AppBuilder) creates. This guide includes some tutorials to help you get started, plus lots of information on developing Photon applications.

post110528: Re: QNX neutrino RTOS 6.6 installation issue on VMWare

2014-05-29T18:09:46Z

Probably something is not right with your virtual machine. Can you please go through the process of creating a new one and letting the installer from the QNX iso run? Please tell us exactly what options you are choosing in vmware as you create the VM.

-Chris

post110526: Re: Where i can find screen.h and libscreen.so

2014-05-29T17:18:50Z

You need to install QNX SDP 6.6, not 6.5.

post110524: Where i can find screen.h and libscreen.so

2014-05-29T11:38:55Z

Sorry for noob question.

I have installed QNX SDP 6.5 and SDP 6.5SP1

But when i tried compile Qt5 for QNX i've got error "screen/screen.h: No such file or directory"

I searched the entire contents of /opt/qnx650 but none screen.h no libscreen.so there was not.

post110519: QNX neutrino RTOS 6.6 installation issue on VMWare

2014-05-29T05:10:55Z

Hi,

I have installed QNX SDP6.6 and SDK for Apps and Media1.0 on windows 7. I have downloaded the VMWare image of QNX

neutrino runtime system and tried to install it on VMWare. Currently I am getting some error while installing QNX

neutrino RTOS on VMWare. Here I am attaching the screenshots of the error and the VMWare details FYI.

Please find the documents attached.

Any solution for this will greatly appreciated.

Thanks in advance.

post110507: 6.5.0 AppBuilder starting nudge

2014-05-28T13:53:27Z

Hi Guy

Im having a problem with the QnX App Builder. Im completely new to the QnX environment.

I currently have the qnxsdp-6.5.0SP1-2012xxx-nto.sh Installed and I cant seem to find the Momentics IDE lanucher All I have is the App Builder.

So I decided that ill try and use the APp builder to build the GUI and then just manually add the code.Problem is the App Builder generates the code so cryptic that I have no idea where to start.

If I BUILD the code and I go have a look in it theres literally nothing that indicates an EVEN LISTENER when a button is clicked or radio button are marked ? Could someone please just nudge in the right direction here.

How do I generate code for WHEN a button is clicked?

To be honest the QnX user manual/Tutorial is a bit cryptic for a new QnX user.

Thanks

post110477: Re: RE: No _IO_CONNECT not being sent to server on name_open()

2014-05-23T17:36:37Z

This is the correct behaviour, _IO_CONNECT is only received when gns is running.

The current recommendation is to check for message type when a message is received, if it is an _IO_CONNECT message, reply to it with an EOK, no data to allow the connect to succeed. After that message is handled, go back to your Msg_Receive() , your message from that client will be waiting (possibly with messages from other clients as well).

If you know that you will never do message passing over the QNET network (and gns will not be running), then you can ignore the _IO_CONNECT message.

The 6.6.0 documentation has been clarified for this behaviour.

Dave

post110311: Re: Cannot link to source files in project sub-folders?

2014-05-13T19:09:59Z

Awesome. That is exactly what I needed. Thanks

post110310: Re: Cannot link to source files in project sub-folders?

2014-05-13T19:09:22Z

You can edit makefile manually. Do one folder and see what it generates.

Just add stuff to the same make variable

(will be in common.mk)

On 14-05-13 03:07 PM, Ariosto Ferro wrote:

> Okay, cool I can do that, except I am working on a project that will have close to on hundred folders each with sub folders? Will I have to add every folder manually with that method?

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post110309

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post110309: Re: Cannot link to source files in project sub-folders?

2014-05-13T19:07:51Z

Okay, cool I can do that, except I am working on a project that will have close to on hundred folders each with sub folders? Will I have to add every folder manually with that method?

post110308: Re: Cannot link to source files in project sub-folders?

2014-05-13T19:06:35Z

I right click on the project in the project explorer window and select "new source folder"

post110307: Re: Cannot link to source files in project sub-folders?

2014-05-13T19:05:00Z

Ok it does not smart enough to add them automatically. Go to project properties, select QNX C/C++ Project

Select Compiler tab, in drop down select Extra source paths, click Project... - add your folder

post110306: Re: Cannot link to source files in project sub-folders?

2014-05-13T18:59:32Z

How did you create "source folder"? Looks like it does not think it is a

source folder

On 14-05-13 01:27 PM, Ariosto Ferro wrote:

> Hello,

>

> I am just getting started with the QNX momentics IDE. I started creating a simple project but I am running into the

> problem where the QNX Momentics IDE cannot seem to link against source files in sub folders of my project.

>

> I have created a very small simple project, it is a QNX C/C++ project. It has the following structure: In the root

> folder: MyTest.cc, and a source folder called asdf. In the /asdf/ folder: asdf.h and asdf.cpp exist.

>

> MyTest.cc is as follows:

>

> #include <cstdlib>

> #include <iostream>

>

> #include "asdf/asdf.h"

>

> int main()

> {

>      doStuff();

> }

>

> asdf.cpp is as follows:

>

> /*

>   * asdf.cpp

>   */

>

> #include "asdf.h"

> #include <stdio.h>

>

> void doStuff()

> {

>      printf ("hello, world.\n");

> }

>

> and asdf.h:

>

> /*

>   * asdf.h

>   */

>

> #ifndef ASDF_H_

> #define ASDF_H_

>

> void doStuff();

>

> #endif /* ASDF_H_ */

>

>

>

> As you can see, this is a very simple example. The project compiles against the header correctly then gives me the

> linker error: "undefined reference to doStuff"... I am new to QNX and a rather novice programmer, but this still strikes

>   me as something the IDE should be able to manage? What am I missing?

>

> I can simply compile this example from command line with

>

> g++     MyTest.cpp asdf/asdf.cpp   -o MyTest

>

> and it works just fine, so I am very confused why I cannot get the IDE to do the same.. Any advice?

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post110305

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post110305: Cannot link to source files in project sub-folders?

2014-05-13T17:27:56Z

Hello,

I am just getting started with the QNX momentics IDE. I started creating a simple project but I am running into the

problem where the QNX Momentics IDE cannot seem to link against source files in sub folders of my project.

I have created a very small simple project, it is a QNX C/C++ project. It has the following structure: In the root

folder: MyTest.cc, and a source folder called asdf. In the /asdf/ folder: asdf.h and asdf.cpp exist.

MyTest.cc is as follows:

#include <cstdlib>

#include <iostream>

#include "asdf/asdf.h"

int main()

{

    doStuff();

}

asdf.cpp is as follows:

/*

* asdf.cpp

*/

#include "asdf.h"

#include <stdio.h>

void doStuff()

{

    printf ("hello, world.\n");

}

and asdf.h:

/*

* asdf.h

*/

#ifndef ASDF_H_

#define ASDF_H_

void doStuff();

#endif /* ASDF_H_ */

As you can see, this is a very simple example. The project compiles against the header correctly then gives me the

linker error: "undefined reference to doStuff"... I am new to QNX and a rather novice programmer, but this still strikes

me as something the IDE should be able to manage? What am I missing?

I can simply compile this example from command line with

g++     MyTest.cpp asdf/asdf.cpp   -o MyTest

and it works just fine, so I am very confused why I cannot get the IDE to do the same.. Any advice?

post110288: Re: RE: No _IO_CONNECT not being sent to server on name_open()

2014-05-13T05:35:49Z

Hi,

Has this issue been resolved yet? I'm experiencing the exact same thing.

I don't have "gns" running, so should I just ignore this _IO_CONNECT message?

Best regards,

Deniz

post110026: BD-SL i.MX6 screen issue

2014-04-24T12:38:40Z

Hi,

I hooked up the BD-SL i.MX6 board to a 7" touch screen (http://boundarydevices.com/products/7-800x480-display/) and used the latest BSP for it to build the appsmedia-sample image.

When I try to launch this image I get the screen calibration screen, only its colors are off (blue backgroud instead of white) and the touch screen isn't working (I'm unable to "touch" the target).

I have used this BSP:

http://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/FreescaleImx6QSabreLite

without any modifications.

The U-Boot text upon boot is looking good (white) on the screen.

Below is the boot serial output, and a photo of the screen is attached.

Can anyone please help?

Thanks!

U-Boot 2013.10-00101-ge20f07c (Jan 22 2014 - 13:30:39)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz

CPU:   Temperature 53 C, calibration data: 0x5a05017d

Reset cause: POR

Board: SABRE Lite

DRAM:  1 GiB

MMC:   FSL_SDHC: 0, FSL_SDHC: 1

SF: Detected SST25VF016B with page size 256 Bytes, erase size 4 KiB, total 2 MiB

auto-detected panel wvga-rgb

Display: wvga-rgb (800x480)

In:    serial

Out:   serial

Err:   serial

Net:   using phy at 6

FEC [PRIME]

Hit any key to stop autoboot:  0

mmc1 is current device

reading QNX-IFS

44339764 bytes read in 1964 ms (21.5 MiB/s)

## Starting application at 0x10800000 ...

SCU_CONFIG = 00005503, 4 cpus

Enabling Dcache and MMU

L2 cache enabled

CPU0: L1 Icache: 1024x32

CPU0: L1 Dcache: 1024x32 WB

CPU0: VFP-d32 FPSID=41033094

CPU0: NEON MVFR0=10110222 MVFR1=01111111

CPU0: 412fc09a: Cortex A9 MPCore rev 10 792MHz

Detected i.MX6 Dual/Quad, revision TO1.2

PLL1 - System     : 792MHz

PLL2 - System Bus : 528MHz

PLL3 - OTG USB    : 480MHz

PLL4 - Audio      : 36MHz

PLL5 - Video      : 339MHz

PLL7 - Host USB   : 480MHz

PLL8 - Enet       : 50MHz

IPG clock     : 66000000Hz

IPG per clock : 66000000Hz

UART clock    : 80000000Hz

CSPI clock    : 60000000Hz

AHB clock     : 132000000Hz

AXI clock     : 264000000Hz

EMI_SLOW clock: 29333333Hz

DDR clock     : 528000000Hz

USDHC1 clock  : 198000000Hz

USDHC2 clock  : 198000000Hz

USDHC3 clock  : 198000000Hz

USDHC4 clock  : 198000000Hz

ENFC clock    : 24000000Hz

decompressing...done

CPU1: L1 Icache: 1024x32

CPU1: L1 Dcache: 1024x32 WB

CPU1: VFP-d32 FPSID=41033094

CPU1: NEON MVFR0=10110222 MVFR1=01111111

CPU1: 412fc09a: Cortex A9 MPCore rev 10 792MHz

CPU2: L1 Icache: 1024x32

CPU2: L1 Dcache: 1024x32 WB

CPU2: VFP-d32 FPSID=41033094

CPU2: NEON MVFR0=10110222 MVFR1=01111111

CPU2: 412fc09a: Cortex A9 MPCore rev 10 792MHz

CPU3: L1 Icache: 1024x32

CPU3: L1 Dcache: 1024x32 WB

CPU3: VFP-d32 FPSID=41033094

CPU3: NEON MVFR0=10110222 MVFR1=01111111

CPU3: 412fc09a: Cortex A9 MPCore rev 10 792MHz

cpu_startnext: cpu1 -> fc411bd4

cpu_startnext: cpu2 -> fc411bd4

cpu_startnext: cpu3 -> fc411bd4

System page at phys:10023000 user:fc410000 kern:fc410000

Starting next program at vfe067e3c

cpu_startnext: cpu0 -> fe067e3c

VFPv3: fpsid=41033094

coproc_attach(10): attach fe083c34 (fe085b68)

coproc_attach(11): attach fe083c34 (fe085b68)

Welcome to QNX Neutrino 6.6.0 on the Freescale i.MX6Q Sabrelite (ARM Cortex-A9 MPCore)

Starting I2C1,2,3 driver (/dev/i2c1,2,3)...

Starting SD3 memory card driver...

Starting SD4 (microSD connector) memory card driver...

Path=0 - FREESCALE USDHC

Process 11 (dev-can-mx35) terminated SIGBUS code=3 fltno=5 ip=0106d0f8(/usr/lib/ldqnx.so.2@__generic_memset+0x58) mapaddr=0006d0f8. ref=28001080

Starting rtc utility...

Starting SATA driver...

Starting Ethernet driver

Starting USB host1 and OTG port (host mode)...

Path=0 - FREESCALE USDHC

target=0 lun=0     Direct-Access(0) - SD:65 SD4GB Rev: 3.0

setting env variables.

Starting Logging services...

Creating ram disk...

Path=0 - AHCI (generic)

Path=0 -

target=0 lun=0     Direct-Access(0) - ram  Rev:

Ram disk Created.

Starting dumper

Starting PPS

pps: NOTICE: PPS initializing

pps: NOTICE: PPS attaching /pps

pps: NOTICE: PPS starting

Starting QDB

Starting network...

Starting SSH...

Starting screen...

Mempool Map addr range[28100000-37f00000]

Mempool Map paddr range[38500000-48300000]

[Interrupt] Attached irqLine 41 with id 13.

[Interrupt] Attached irqLine 42 with id 14.

[Interrupt] Attached irqLine 43 with id 15.

Attached resmgr to /dev/galcore with id:0.

Starting touch input...

Starting keyboard...

Error: No such file or directory - cannot open calibration file for absolute filter module(/etc/system/config/calib.localhost)

Starting calibration...

Setting Volume...

"Headphone",0 - Playback Group

Capabilities -  Volume Jointly-Mute

Channels - Front-Left Front-Right

Volume Range - minimum=0, maximum=127

Channel 0 Front-Left   -  50 ( 39%)

Channel 1 Front-Right  -  50 ( 39%)

Successfully loaded DLL "/lib/dll/pubs/pp-generic.so".

Successfully loaded DLL "/lib/dll/pubs/pp-mediafs.so".

Unable to access /pps/services/certmgr/control?nopersist

INFO: Installing browser app

Run the following to launch the browser:

launch sys.browser

post109917: Re: DVD Installer partition bug?

2014-04-15T15:30:41Z

Sorry, but i am not very good user, so can you explain me how to do this? :( (i mean fix the problem with header 0 etc, i have tryed to use google but it didnt help)

i have windows7 pc: ssd and hdd disks ...

error is the same: unable to access /dev/hd(0,1,2,...)t(78/79..)

my cd works good (i successfully installed qnx to my netbook).

could you make small simple guide for me please

post109906: Linux Java version

2014-04-12T19:26:38Z

I am trying to install Momentics in Ubunbtu 12.0.4-32 bit.

I have the Open JDK 6 and 7 installed. The installation indicates that an appropriate JVM cannot be found.

I have tried putting the path to my JVM folder using is:javajhome, but it still reports that it is not able to find an appropriate JVM.

post109901: Re: RE: Creating Bootable File System with QNX 6.6

2014-04-11T16:32:19Z

figured it out - you just need to point directly to the directory with pc1 and pc2 located in /boot/sys when using the dloader utility

post109881: Re: RE: Creating Bootable File System with QNX 6.6

2014-04-09T22:43:57Z

Thank you for the above steps - could you please elaborate a little? After setting up the partitions on the USB mass device how did you transfer the primary and secondary boot loaders ipl-diskpc1 and ipl-diskpc2 to the umass? I keep getting the error unable to load pc1...

thanks for the help!

post109857: Re: RE: Creating Bootable File System with QNX 6.6

2014-04-08T17:49:48Z

Having investigated further, I don't think there is a good way without using a QNX 6.6 system.

This would create a chicken and egg problem except that QNX has provided a 6.6 VM system.

Once you have installed and started the VM you need to make your media available to the VM. The easiest way is via a USB device. Fortunately most media, EIDE, SATA, Compact Flash or SD can be attached this way with an adapter. Assuming you have your media visible as a device, the steps are.

1) create a partition using fdisk

2) mount the partition using "mount -e"

3) Initialize the partition using mkqnx6fs

4) create a mount point for the partition using mount

5) create directories using mkdir

6) copy the boot file, qnx utilities, startup scripts and your application to the media using cp

post109849: Re: RE: Creating Bootable File System with QNX 6.6

2014-04-08T13:26:30Z

So can you please let me know step by step method to create bootable massstorage device ??

post109623: Re: Problems with remote debugging

2014-03-26T22:59:51Z

I am having the same problem as well since upgrading from QNX 6.5.0 SP1 to 6.6.0.

Tom

post109329: Re: Problems with remote debugging

2014-03-11T02:58:50Z

I'm having the same problem

post109124: RE: Creating Bootable File System with QNX 6.6

2014-03-02T15:31:40Z

I wouldn't know how. I would have to use the vmware download. I guess for arm which uses flash devices it`s a different story has one can create the raw image and dump it on the flash device. But for x86 and the requirement posed by the BIOS I`d be stump.

At the moment we use a QNX6 Vmware image and connect the device to it via USB. Next we format and partition the disk and install our custom "distribution" of QNX. Luckly we will be able to use the same idea with 6.6. OS wise I don`t care for the 6.6 new features, there are so little of them ;-( But we are in need of C++11 compiler.

-----Message d'origine-----

De : Mitchell Schoenbrun [mailto:community-noreply@qnx.com]

Envoyé : Sunday, March 02, 2014 9:35 AM

À : momenticsgs-community

Objet : Creating Bootable File System with QNX 6.6

There probably is a Duh! answer to this question, but it is not obvious to me.

If I were to download QNX 6.6 Momentics for Windows and install it, and then I wanted to create a QNX 6 (or QNX 4) file system that I can boot the QNX 6.6 OS off of.

Assume for a moment that I have no other access to a QNX 6 system, eg. the VMWare download.

How do I do this using just Windows and Momentics?

_______________________________________________

QNX Momentics Getting Started

http://community.qnx.com/sf/go/post109123

To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post109123: Creating Bootable File System with QNX 6.6

2014-03-02T14:34:42Z

There probably is a Duh! answer to this question, but it is not obvious to me.

If I were to download QNX 6.6 Momentics for Windows and install it, and then I wanted to create a QNX 6 (or QNX 4) file system that I can boot the QNX 6.6 OS off of.

Assume for a moment that I have no other access to a QNX 6 system, eg. the VMWare download.

How do I do this using just Windows and Momentics?

post109005: Sound card not working

2014-02-24T15:00:02Z

I have installed QNX 6.4.0 neutrino on an unused x86 box. It's all working fine, I can run my test code on there via the network connection (qconn).

However the sound does not work. When I click the audio settings I get an error, similarly if I run my code it can't find an audio card.

I had an on-board sound card (built-in). Running io-audio, I was not able to detect it. So I went a purchased a new off the shelf PCI sound card (CMI-8738), this also failed to be recognized by QNX.

When I run "pci -vvv | less" I am able to see both audio devices are connected (and I can see in the BIOS as well).

I read somewhere that I need to get some driver called deva-ctrl-cmpci.so, but I can't find that anywhere.

What can I do?

post108840: Re: qconfig.mk file disappears after installing the 6.5 service pack

2014-02-17T10:00:12Z

Hi!

New to QNX aswell.

I'm having the same problem above, using ubuntu 12.04.

The uninstallation script (runUninstall.sh) is missing for me, so i had to find:

/opt/qnx650/_uninstall/qnxsdp/6.5.0/uninstaller.bin

by hand.

post107839: Problems with remote debugging

2014-01-09T19:31:00Z

Hello folks,

currently, I'm trying to remote debug an application that is running on a remote target connected via network from my host desktop. I create a dummy Makefile object and create a launch configuration for it with the unstripped binary from the target and some library paths all located on my host desktop. The target seems to connect. However, after pressing the "debug" button in the launch configuration I get the error „Error in final launch sequence Cannot set share library paths binary object cannot be null“. Do you know what that means?

Regards

post106649: Re: qconfig.mk file disappears after installing the 6.5 service pack

2013-11-10T22:17:50Z

It happens to me as well. It thought it had to do with having low space on my installation directory so I cleaned some stuff in it, reinstalled and still have that problem.

post106513: Re: Serial target (Momentics 6.5.0SP1 on Linux)

2013-11-04T15:59:48Z

As Elena indicated, QConn is expecting to connect over a TCPIP connection. If the target has no other options, you _could_ setup PPP over serial. This of course would be a slow TCPIP connection but is workable is there is no network interface available.

post106491: Re: tracing user events

2013-11-02T14:25:46Z

I use 6.5.0 SP1.

Adding the explicity flush solves the problem. Thanks.

> Which version of tracelogger are you using?  There was a fix made in

> 2011 that addressed this.

>

> Try adding TraceEvent(_NTO_TRACE_FLUSHBUFFER) to your app...

>

> On 2013-11-02 10:13 AM, Sebastian Fischmeister wrote:

> >> How many user events did you emit?  Did you stop tracelogger? Sounds

> >> like the buffer wasn't flushed.

> > I emitted about 12 user events. However, since I run tracelogger with the

> option of '-s 3', I assume that it would force a buffer flush before it

> terminates, woudn't it?

> >

> >    Sebastian

> >

> >

> >

> > _______________________________________________

> >

> > QNX Momentics Getting Started

> > http://community.qnx.com/sf/go/post106489

> > To cancel your subscription to this discussion, please e-mail momenticsgs-

> community-unsubscribe@community.qnx.com

>

post106490: Re: tracing user events

2013-11-02T14:18:45Z

Which version of tracelogger are you using?  There was a fix made in

2011 that addressed this.

Try adding TraceEvent(_NTO_TRACE_FLUSHBUFFER) to your app...

On 2013-11-02 10:13 AM, Sebastian Fischmeister wrote:

>> How many user events did you emit?  Did you stop tracelogger? Sounds

>> like the buffer wasn't flushed.

> I emitted about 12 user events. However, since I run tracelogger with the option of '-s 3', I assume that it would force a buffer flush before it terminates, woudn't it?

>

>    Sebastian

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post106489

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post106489: Re: tracing user events

2013-11-02T14:13:40Z

> How many user events did you emit? Did you stop tracelogger? Sounds

> like the buffer wasn't flushed.

I emitted about 12 user events. However, since I run tracelogger with the option of '-s 3', I assume that it would force a buffer flush before it terminates, woudn't it?

Sebastian

post106488: Re: tracing user events

2013-11-02T14:08:57Z

How many user events did you emit? Did you stop tracelogger? Sounds

like the buffer wasn't flushed.

On 2013-11-01 10:05 PM, Sebastian Fischmeister wrote:

> When running tracelogger with these filter options, it seems that the USREVENTS are not captured. This seems incorrect, because USREVENT is different class than the ones that get filtered with F1 to F7. Enabling one of the options also starts recording the USREVENT class.

>

> Test it with:

>

> tracelogger -F1 -F2 -F3 -F4 -F6 -F7 -s 3

> ./start_your_program_that_uses_trace_logi_while_trace_gets_logged

> traceprinter | grep USREVENT

>

>

>

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post106486

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post106486: tracing user events

2013-11-02T02:05:38Z

When running tracelogger with these filter options, it seems that the USREVENTS are not captured. This seems incorrect, because USREVENT is different class than the ones that get filtered with F1 to F7. Enabling one of the options also starts recording the USREVENT class.

Test it with:

tracelogger -F1 -F2 -F3 -F4 -F6 -F7 -s 3

./start_your_program_that_uses_trace_logi_while_trace_gets_logged

traceprinter | grep USREVENT

post106433: Re: qconfig.mk file disappears after installing the 6.5 service pack

2013-10-31T04:53:56Z

I seriously think it is a bug, it happens to me to, under ubuntu 12.04.

post106169: Re: Serial target (Momentics 6.5.0SP1 on Linux)

2013-10-23T13:10:22Z

You cannot create qnx target using serial port because we can only do a limited interface though it.

You can open serial terminal, which allows file transfer OR you can do debugging over serial.

> Hi,

>

> I got my target running, I get pdebug running, but now I need to connect to

> the target through Momentics. I can't seem to create a target that uses a

> serial port (/dev/ttyS1). New target only gives me the option for networked

> targets. Am I doing anything wrong or is debugging through the serial port not

> supported on Momentics 6.5.0SP1?

>

> Thanks,

> Sebastian

post106157: Serial target (Momentics 6.5.0SP1 on Linux)

2013-10-23T02:37:43Z

Hi,

I got my target running, I get pdebug running, but now I need to connect to the target through Momentics. I can't seem to create a target that uses a serial port (/dev/ttyS1). New target only gives me the option for networked targets. Am I doing anything wrong or is debugging through the serial port not supported on Momentics 6.5.0SP1?

Thanks,

Sebastian

post105673: Re: qconfig.mk file disappears after installing the 6.5 service pack

2013-10-05T09:27:50Z

Hello,

I get exactly the same problem on Ubuntu 13.04 x86_64.

1. sudo -E ./qnxsdp-6.5.0-201007091524-linux.bin

2. logout and login

3. /opt/qnx650/target/qnx6/usr/include/mk/ contains many files including qconf-linux.mk

4. sudo -E ./qnxsdp-6.5.0SP1-201206271006-linux.bin

5. logout and login

6. ls /opt/qnx650/target/qnx6/usr/include/mk/ only contains nto_mips.mk

Is this user error or should I report it as a bug?

Many thanks

Saul Hazledine

post105671: Re: QNX post-installation problem

2013-10-04T23:21:55Z

Hi,

I am not sure if you figured this out or if any future QNX newbie runs into the same problem...

We had the same issue with an i86 machine; the symptoms were the same as Hieronim posted. The problem was in our /etc/rc.d/rc.local file. We were trying to mount some NFS directories that were moved since the original system was installed. I had to update the NFS mount point to the new location and I see the GUI and all is well with this QNX system :)

Hope this helps anyone else that runs into this error.

Abhi

post105327: Re: qconfig.mk file disappears after installing the 6.5 service pack

2013-09-23T17:53:57Z

I have been using Ubuntu 12.04 and have the same issue. The qconfig.mk symbolic link points to files that don't exist after installing SP1.

I have found a solution. After speaking with our local QNX FAE, I uninstalled everything and re-installed from the console. I logged into Ubuntu with the recovery console (so no GUI) and did the install that way, always using "sudo -E <qnx-installer>.bin -console". You need the -console flag since you are at a console. Then I logged out and back in and repeated for SP1.

Now all qconfig.mk files are are there and I can build from Momentics or from the command line.

post104689: Re: qconfig.mk file disappears after installing the 6.5 service pack

2013-08-30T04:16:58Z

I am having the exact same problem and I did install sp1 using the -E option but it did not help. I still have this issue :(

post104552: Re: QNX 6.5.0 Corrupted File System (ALWAYS)

2013-08-27T05:05:08Z

Thanks, that worked. Very grateful for your quick reply!

Eric

post104549: Re: QNX 6.5.0 Corrupted File System (ALWAYS)

2013-08-27T03:30:37Z

You must run dinit on the partition. You will see a /dev/hd1t79 which is the partition device.

Sent from my BlackBerry 10 smartphone on the Rogers network.

From: Eric Franz

Sent: Monday, August 26, 2013 11:01 PM

To: momenticsgs-community

Reply To: momenticsgs-community@community.qnx.com

Cc: ricanz@san.rr.com; ricanz58@yahoo.com

Subject: QNX 6.5.0 Corrupted File System (ALWAYS)

Hello,

I'm new to the forum and I thought I posted this already but I don't see my post added to the list, so hopefully this is not a duplicate.  I'm desperately trying to just create a QNX partition on a hard drive but I always get "Corrupted file system detected".  I've installed the QNX SDP 6.5.0 on my x86 Advantech PCM-9389 onto the primary SATA hard drive via the SATA CDROM.  I replace the CDROM with a new SATA hard drive. Then observe the new drive is mounted on /dev/hd1.  Then I:

1) fdisk -z /dev/hd1 to zero the partition table and enter interactive mode.

2) I change partition 1 to type 79, start at cyl 0, end at 4799, set the partition bootable, save, quit.

3) mount -e /dev/hd1

4) fdisk /dev/hd1 show  this shows the drive as expected:

QNX type 79 start cyl 0 end 4799 size 37652 MB  * (bootable)

5) I restart the system via "shutdown" command expecting QNX to automatically detect the new drive and partition and mount it for me.

6) I see "mount: Can't mount /fs/hd1-qnx4 (type qnx4)"

             "mount: possible reason Corrupted file system detected"

I have also tried manually mounting  after step 4 via "mount -t qnx4 /dev/hd1t79 /fs/hd1" and I get the same error as in step 6.

Please help and my apologies if this is a duplicate post.  Thanks,

Eric Franz

_______________________________________________

QNX Momentics Getting Started

http://community.qnx.com/sf/go/post104544

To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post104544: QNX 6.5.0 Corrupted File System (ALWAYS)

2013-08-27T03:01:46Z

Hello,

I'm new to the forum and I thought I posted this already but I don't see my post added to the list, so hopefully this is not a duplicate.  I'm desperately trying to just create a QNX partition on a hard drive but I always get "Corrupted file system detected".  I've installed the QNX SDP 6.5.0 on my x86 Advantech PCM-9389 onto the primary SATA hard drive via the SATA CDROM.  I replace the CDROM with a new SATA hard drive. Then observe the new drive is mounted on /dev/hd1.  Then I:

1) fdisk -z /dev/hd1 to zero the partition table and enter interactive mode.

2) I change partition 1 to type 79, start at cyl 0, end at 4799, set the partition bootable, save, quit.

3) mount -e /dev/hd1

4) fdisk /dev/hd1 show  this shows the drive as expected:

QNX type 79 start cyl 0 end 4799 size 37652 MB  * (bootable)

5) I restart the system via "shutdown" command expecting QNX to automatically detect the new drive and partition and mount it for me.

6) I see "mount: Can't mount /fs/hd1-qnx4 (type qnx4)"

             "mount: possible reason Corrupted file system detected"

I have also tried manually mounting  after step 4 via "mount -t qnx4 /dev/hd1t79 /fs/hd1" and I get the same error as in step 6.

Please help and my apologies if this is a duplicate post.  Thanks,

Eric Franz

post104531: Touchscreen_monitor_qnx65

2013-08-26T16:31:56Z

I have usb touchscreen monitor and qnx65. I need to specify the click sensitive area.

I tried combinations of the /usr/photon/bin/Photon parameters U, T, C; but haven't effect.

Eg.

Photon-g-U5-T10-C50

input manager:

/usr/photon/bin/devi-hid touch mouse kbd

thanks,

Andres

post104265: Need help to create QNX image for Crownbay Board

2013-08-19T04:29:59Z

Need help to create QNX image for Crownbay Board, i have managed to start a console using the [pri=10o] PATH=/proc/boot diskboot -b1 -D0 -odevc-con,-n1 -odevc-con-hid,-n1 -v command in boot file. However, when the board is booted, control doesn't go to the terminal. Kindly do let me know the exact steps to start console from boot file. I am using QNX IDE 4.7.

post104078: Re: Can't Install tdk-efsys-1.1.0 0n Windows 7 enterprise

2013-08-09T13:43:57Z

Why would you want to do that? Which version of QNX are you using? If you are trying to use QNX 6.3 tools on Windows 7 - AFAIK this is not supported.

- Malte

post103605: Re: Can't Install tdk-efsys-1.1.0 0n Windows 7 enterprise

2013-07-25T20:14:59Z

it's hard to tell what the problem is without seeing the error message.

Try downloading older version of java (for example: windows-sun-1.4.2.exe) and starting your installer from command line:

C:\Users\root\Desktop>tdk-efsys-1.1.0-20052861500-win32.exe -is:javahome "C:\Users\root\Desktop"

post103586: RE: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T16:57:47Z

Read the documentation, it`s explained in the section QNX Momentics IDE User's Guide > Launch Configurations Reference > Setting execution options -> Upload tab .

-----Message d'origine-----

De : AIRAN LEON [mailto:community-noreply@qnx.com]

Envoyé : Thursday, July 25, 2013 8:19 AM

À : momenticsgs-community

Objet : Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

Thanks Aleksandar,

I don't know why the program change the name of file. The project's name is only 'Prueba1', and the file in /tmp folder is Prueba1AUTOMATIZACIÓNxxx... Adjunct new capture screen, but now i'm running system from CD.

AUTOMATIZACIÓN is the name of user in this pc, i try change it and try again without boot from CD.

_______________________________________________

QNX Momentics Getting Started

http://community.qnx.com/sf/go/post103575

To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

post103581: Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T16:09:57Z

On 13-07-25 12:02 PM, AIRAN LEON wrote:

> Thank you so much, Aleksandar.

>

> At the end was the "use unique names" option. Now i can run application without problems, but during load program console show this warning:

>

> warning: Host file C:/QNX650/target/qnx6/x86/usr/lib/ldqnx.s0.2 does not match target file /user/lib/ldqnx.so.2

You need to match VM and NDK versions you are using.

>

> Is necesary replace the file in C:/QNX650/target/qnx6/x86/usr/lib/ folder with /user/lib/ldqnx.so.2 ??

>

> On another hand, do you know any good tutorial or guide to learn develop real-time applications or related. I will try to guide by QNX examples, they aren`t very simple.

That is a very big topic, and there is a lot of information you can (and

should) read. You can start with the examples and read QNX documentation.

Maybe you want to read QNX Neturino Programmer's Guide:

http://www.qnx.com/download/feature.html?programid=20966

>

> Thanks again and greetings.

Good luck,

Aleksandar

post103580: Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T16:02:01Z

Thank you so much, Aleksandar.

At the end was the "use unique names" option. Now i can run application without problems, but during load program console show this warning:

warning: Host file C:/QNX650/target/qnx6/x86/usr/lib/ldqnx.s0.2 does not match target file /user/lib/ldqnx.so.2

Is necesary replace the file in C:/QNX650/target/qnx6/x86/usr/lib/ folder with /user/lib/ldqnx.so.2 ??

On another hand, do you know any good tutorial or guide to learn develop real-time applications or related. I will try to guide by QNX examples, they aren`t very simple.

Thanks again and greetings.

post103578: Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T15:28:37Z

There should be an option in your debug configuration that says "use

unique names" you can uncheck that and the name of the binary on the

target should remain "as-is" without adding "unique" portion.

On 13-07-25 11:19 AM, AIRAN LEON wrote:

> Thanks Aleksandar,

>

> I don't know why the program change the name of file. The project's name is only 'Prueba1', and the file in /tmp folder is Prueba1AUTOMATIZACIÓNxxx... Adjunct new capture screen, but now i'm running system from CD.

>

> AUTOMATIZACIÓN is the name of user in this pc, i try change it and try again without boot from CD.

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post103575

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

>

post103576: Can't Install tdk-efsys-1.1.0 0n Windows 7 enterprise

2013-07-25T15:24:40Z

I am trying to run the Installer for tdk-efsys-1.1.0 on my new PC with Windows 7 Enterprise, but the setup window just comes up Blank with the button. No text or place to type in info. Any Ideas?

post103575: Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T15:19:20Z

Thanks Aleksandar,

I don't know why the program change the name of file. The project's name is only 'Prueba1', and the file in /tmp folder is Prueba1AUTOMATIZACIÓNxxx... Adjunct new capture screen, but now i'm running system from CD.

AUTOMATIZACIÓN is the name of user in this pc, i try change it and try again without boot from CD.

post103574: Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T14:52:57Z

But in the screenshot you see that the name on the target is

concatenated with a "unique" string (I think it may be drived from your

host name). I suspect 'O' with the accent is confusing it.

On 13-07-25 10:40 AM, AIRAN LEON wrote:

> I think that the name isn't the problem, because i have tried run the examples projects and i have the same error.

>

> I think that the problem is on QNX neutrino, because if i boot system directly from CD, in this case, i can run and debug all projects without problems but the project's files not saved on system.

>

> Thank you, Aleksandar.

>

>

>

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post103573

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

>

post103573: Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T14:40:58Z

I think that the name isn't the problem, because i have tried run the examples projects and i have the same error.

I think that the problem is on QNX neutrino, because if i boot system directly from CD, in this case, i can run and debug all projects without problems but the project's files not saved on system.

Thank you, Aleksandar.

post103567: Re: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T13:32:07Z

Try with plain ASCII file names?

On 13-07-25 06:15 AM, AIRAN LEON wrote:

> Hello,

>

> This is the first time that i face a RTOS, and i'm very lost. I have followed the steps of guide: "10 Steps to Developing a QNX Program: Quickstart Guide [6.5.0]", and when i go to do the step 9 "Starting and debugging" i find a error during "Donwloading and starting application" process. (i add a capture screen)

>

> My intention is, in the future, integrate QNX neutrino on a beaglebone black board, but, for now, i'm using virtual machine. Following the steps of guide, i use VMware Player (last versión 5.0.2) and i downloaded and installed, in VM, the iso with x86 host for this version. Did I need to do some configuration on QNX , that is not indicated in the guide?

>

> As I have said i'm a newbie, and i would like to know if you know a good tutorial to learn how to program real-time applications. I've seen a lot of documentation but QNX has no good tutorials that showing step by step how to program. Basically I need a QNX for dummies.

>

> Thank you very much and greetings.

>

>

>

> _______________________________________________

>

> QNX Momentics Getting Started

> http://community.qnx.com/sf/go/post103556

> To cancel your subscription to this discussion, please e-mail momenticsgs-community-unsubscribe@community.qnx.com

>

post103556: My first steps with QNX and my first problems: Error .gdbinit: No such file or directory

2013-07-25T10:15:57Z

Hello,

This is the first time that i face a RTOS, and i'm very lost. I have followed the steps of guide: "10 Steps to Developing a QNX Program: Quickstart Guide [6.5.0]", and when i go to do the step 9 "Starting and debugging" i find a error during "Donwloading and starting application" process. (i add a capture screen)

My intention is, in the future, integrate QNX neutrino on a beaglebone black board, but, for now, i'm using virtual machine. Following the steps of guide, i use VMware Player (last versión 5.0.2) and i downloaded and installed, in VM, the iso with x86 host for this version. Did I need to do some configuration on QNX , that is not indicated in the guide?

As I have said i'm a newbie, and i would like to know if you know a good tutorial to learn how to program real-time applications. I've seen a lot of documentation but QNX has no good tutorials that showing step by step how to program. Basically I need a QNX for dummies.

Thank you very much and greetings.