Provide network access, and then follow the product documentation to set up the iLO firmware or Remote iLO Card.
Note: Make sure that your Lights-Out firmware is a recent version. Lab Management has
been tested with versions of Lights-Out firmware going back to 2001 but you
must be certain to use the most recent firmware versions.
-
Set up network access to the Integrated Lights-Out (iLO) firmware or to the
Remote iLO Card (RILOE).
-
Follow the procedure for setting up the iLO firmware or the RILOE card for
network access.
Consult the product documentation that came with your system or the RILOE
card for instructions on making it available to the network.