Dell PowerEdge 840 BASE Desktop/server#
The officially supported Dell PowerEdge 840 configuration is as follows. Note that you should always test your indivdual hardware configuraiton as delivered by the vendor as chipsets and configuration options change and support cannot be guaranteed. For specific details pertaining to any of the individual interfaces, see the QNX driver documentation.
| Component | Description | Supported |
|---|
| Model Number | 840 | N/A |
| Base Unit | Dual-Core Intel PentiumD | Y |
| Bridge Chip | Intel 3000 (consists of Intel E7230 Memory Controller Hub, with Intel 82801G (ICH7) I/O Controller) | Y |
| Display | External Analog 1280x1024 | Y |
| Memory | 1GB DDR2 | Y |
| Keyboard | Dell USB keyboard and Microsoft optical USB wheel mouse | Y |
| Video Card | ATI ES1000 (PCI Vendor ID 0x1002, PCI Device ID 0x515E) | Y |
| Networking | on-board single Gigabit Network Adapter - Broadcom NetXtreme BCM5721 Gigabit Ethernet PCI express (PCI Vendor ID 0x14E4, PCI Device ID 0x1659) | Y |
| Wireless | N/A | N/A |
| Hard Drive | 80 GB SATA 3.5-inch, 7200 RPM hard drive on-board SATA | Y (no RAID support) |
| Touchpad | N/A | Y |
| USB | I/O Ports 4 USB 2.0 | Y |
| Firewire | 1x IEEE 1394 Firewire | N |
| Serial port | 1 9-pin RS232 port | Y |
| Floppy Disk Drive | No Floppy Drive | N/A |
| CD / DVD-ROM Drive | N/A | N/A |
| Audio | Not tested | N/A | |
Releases#
QNX Neutrino 6.4#
The binaries are included in QNX Momentics 6.4.0 distribution.
QNX Neutrino 6.3.2/6.3.0 SP3#
Features#
| Feature | Planned Availability | Format | Notes |
|---|
| Graphics | Completed | BIN | . |
QNX Neutrino 6.3.2/6.3.0 SP3 Change History#
Patch ID 730#
- Support for graphics devices
Search Keywords: 86, x86, power, edge, 840, desktop, server, Dell, X86, Power, Edge, DESKTOP, SERVER
Hide Details
