We are trying to provide ipv6 support on our device.
Currently io-pkt-v4 is running on our device. mpc85xx is the driver provided by QNX.
e.g.
io-pkt-v4 -d mpc85xx pci=0,phy_addr=1,mac=008074001736 -d mpc85xx pci=2,phy_addr=17,mac=008074001737
We have the binary io-pkt-v6-hc (dated on 7/9/2010) that can be downloaded to the device.
Would you please give some instructions about how to run and configure io-pkt-v6-hc?
(1) Does the same driver mpc85xx work with io-pkt-v6-hc? E.g.
Can we issue the same command such as
" io-pkt-v6-hc -d mpc85xx pci=0,phy_addr=1,mac=008074001736 -d mpc85xx pci=2,phy_addr=17,mac=008074001737"
(2) if not, anything else need to be downloaded and configured/linked?
Thanks in advance.
_______________________________________________
Technology
http://community.qnx.com/sf/go/post103080
To cancel your subscription to this discussion, please e-mail technology-networking-unsubscribe@community.qnx.com