################################## # #Booting with new broadcom driver with only one NIC connected # ################################## Time Sev Major Minor Args Feb 08 21:15:48 2 19 1500 devb-ahci 1.00A (Oct 20 2008 23:23:51) Feb 08 21:15:48 2 5 0 libcam.so (Oct 20 2008 23:22:34) bver 6040001 Feb 08 21:15:48 2 5 0 xpt_configure: ahci SIM attach failure Feb 08 21:15:48 2 19 0 devb-eide 1.00A (Oct 20 2008 23:27:28) Feb 08 21:15:48 2 5 0 libcam.so (Oct 20 2008 23:22:34) bver 6040001 Feb 08 21:15:48 2 19 0 eide_identify_devices: Intel 82801GB IDE vid 8086, did 27df, class 1018a rev 1, busno 0, dfunc f9 Feb 08 21:15:48 2 19 0 eide_identify_devices: cmd_addr 1f0, cntl_addr 3f4, irq e, chnl 0, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 0 status 50, error 0 Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 1 status 0, error 0 Feb 08 21:15:48 2 19 0 eide_identify: chk 4 cmd ec, tid 0, status 51, astatus 51, error 4 Feb 08 21:15:48 2 19 0 eide_display_devices: mdl Optiarc DVD RW AD-7220A sn fw 1.01 tid 0, cable 80, max udma 4, cur udma 4, max mdma 2, cur mdma 0, max sdma -1, cur sdma -1, pio 4, mblk 0 Feb 08 21:15:48 2 19 0 eide_init_devices: Optiarc DVD RW AD-7220A path 0, tid 0, udma 4, mdma 2, sdma -1, pio 4, mblk 0 Feb 08 21:15:48 2 19 0 eide_identify_devices: Intel 82801GB IDE vid 8086, did 27df, class 1018a rev 1, busno 0, dfunc f9 Feb 08 21:15:48 2 19 0 eide_identify_devices: cmd_addr 170, cntl_addr 374, irq f, chnl 1, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 0 status 7f, error 7f Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 1 status 7f, error 7f Feb 08 21:15:48 2 19 0 eide_identify_devices: Intel 82801GB SATA vid 8086, did 27c0, class 1018f rev 1, busno 0, dfunc fa Feb 08 21:15:48 2 19 0 eide_identify_devices: cmd_addr e880, cntl_addr e800, irq 5, chnl 0, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 0 status 50, error 0 Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 1 status 0, error 0 Feb 08 21:15:48 2 19 0 eide_display_devices: mdl ST380815AS sn 5QZ4NBK9 fw 3.AAD tid 0, cable 40, max udma 6, cur udma 5, max mdma 2, cur mdma 0, max sdma -1, cur sdma -1, pio 4, mblk 16 Feb 08 21:15:48 2 19 0 eide_init_devices: ST380815AS path 1, tid 0, udma 5, mdma 2, sdma -1, pio 4, mblk 16 Feb 08 21:15:48 2 19 0 eide_identify_devices: Intel 82801GB SATA vid 8086, did 27c0, class 1018f rev 1, busno 0, dfunc fa Feb 08 21:15:48 2 19 0 eide_identify_devices: cmd_addr e480, cntl_addr e400, irq 5, chnl 1, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 0 status 7f, error ff Feb 08 21:15:48 2 19 0 eide_identify_devices: probing dev 1 status 7f, error ff Feb 08 21:15:48 2 5 200 cam-cdrom.so (Oct 20 2008 23:22:38) Feb 08 21:15:48 2 5 100 cam-disk.so (Oct 20 2008 23:22:41) Feb 08 21:15:52 2 19 1600 devb-mvSata 1.00A (Oct 20 2008 23:27:53) Feb 08 21:15:52 2 5 0 libcam.so (Oct 20 2008 23:22:34) bver 6040001 Feb 08 21:15:52 2 5 0 xpt_configure: No mvSata interfaces found Feb 08 21:15:54 5 14 0 tcpip starting Feb 08 21:15:54 3 14 0 Using pseudo random generator. See "random" option Feb 08 21:15:54 5 14 0 initializing IPsec... done Feb 08 21:15:54 5 14 0 IPsec: Initialized Security Association Processing. Feb 08 21:15:54 5 14 0 bge0 at pci1 dev 0 function 0: Broadcom BCM5787M Gigabit Ethernet Feb 08 21:15:54 5 14 0 bge0: interrupting at irq 5 Feb 08 21:15:54 5 14 0 bge0: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:18:7d:03:f4:d4 Feb 08 21:15:54 5 14 0 bge0: setting short Tx thresholds Feb 08 21:15:54 5 14 0 Find PHY, oui = 00000af7, model = 0000000e Feb 08 21:15:54 5 14 0 ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface Feb 08 21:15:54 5 14 0 ukphy0: OUI 0x000af7, model 0x000e, rev. 0 Feb 08 21:15:54 5 14 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto Feb 08 21:15:54 5 14 0 bge1 at pci2 dev 0 function 0: Broadcom BCM5787M Gigabit Ethernet Feb 08 21:15:54 5 14 0 bge1: interrupting at irq 7 Feb 08 21:15:54 5 14 0 bge1: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:18:7d:03:f4:d5 Feb 08 21:15:54 5 14 0 bge1: setting short Tx thresholds Feb 08 21:15:54 5 14 0 Find PHY, oui = 00000af7, model = 0000000e Feb 08 21:15:54 5 14 0 ukphy1 at bge1 phy 1: Generic IEEE 802.3u media interface Feb 08 21:15:54 5 14 0 ukphy1: OUI 0x000af7, model 0x000e, rev. 0 Feb 08 21:15:54 5 14 0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto Feb 08 21:15:55 2 5 0 libcam.so (Oct 20 2008 23:22:34) bver 6040001 ################################## #First Major timeout ################################## Feb 08 21:24:51 2 19 0 eide_command: INTR_WAIT cmd ea, status 50, error 0 Feb 08 21:25:02 2 5 100 cam-disk.so (Oct 20 2008 23:22:41) Feb 08 21:25:02 7 15 0 qnet(L4): qnet_birth(): qnet_init() - calling Feb 08 21:25:02 7 15 0 qnet(L4): try_ifp(): new interface: bge0: index 0 mac addr 00:18:7D:03:F4:D4 Feb 08 21:25:02 7 15 0 qnet(QOS): nd_change_notify(): Node Up: nd 0 EA3f4d4.net.intra Feb 08 21:25:02 7 15 0 qnet(L4): try_ifp(): new interface: bge1: index 1 mac addr 00:18:7D:03:F4:D5 Feb 08 21:25:02 7 15 0 qnet(L4): qnet_birth(): qnet_init() - complete Feb 08 21:25:02 7 15 0 qnet(L4): lr_verify_my_name_and_domain(): starting resolution of our hostname EA3f4d4.ndt.ca to ensure unique Feb 08 21:25:03 7 15 0 qnet(L4): lr_verify_my_name_and_domain(): qnet going online Feb 08 21:25:06 7 15 0 qnet(L4): lr_add_ndb(): adding L4 0 addr to ndb for nd 1 yan-qnx.ndt.ca Feb 08 21:25:06 7 15 0 qnet(QOS): nd_change_notify(): Node Up: nd 1 yan-qnx.ndt.ca Feb 08 21:25:07 cron: started Feb 08 21:25:09 1 8 0 phfont.so: init... Feb 08 21:25:09 1 8 0 phfont.so: initialized. Feb 08 21:25:09 1 8 0 phfont.so: '/dev/phfont[<32|64>]' server installed. Feb 08 21:25:09 6 8 0 VGA primary : bus 0x0 dev/func 0x10 Feb 08 21:25:09 6 8 0 Found 1 PCI/AGP display devices Feb 08 21:25:09 6 8 0 pci_init: found PCI device 8086:2772 Feb 08 21:25:15 3 14 2000 netmanager error: dhcp.client: Network interface is not available Feb 08 21:25:15 3 14 2000 netmanager error: Could not configure DHCP on interface en0 Feb 08 21:25:17 3 14 2000 netmanager error: Could not set route (dest 0.0.0.0): Network is unreachable ################################## #Second Major timeout ################################## Feb 08 21:39:55 5 14 0 bge0: block failed to stop: reg 0x1400, bit 0x00000002 Feb 08 21:40:42 7 15 0 qnet(kif): server_lookup(): invalid scoid 35, 0 Feb 08 21:40:42 7 15 0 qnet(QOS): tx_xmit_init_conn_pkt(): to nd 5 on L4 0 Feb 08 21:40:42 7 15 0 qnet(kif): server_lookup(): invalid scoid 36, 36 Feb 08 21:47:47 7 15 0 qnet(L4): lr_add_ndb(): adding L4 1 addr to ndb for nd 3 qnxmg.ndt.ca ################################## # #Booting with new broadcom driver with Both NICs connected # ################################## Time Sev Major Minor Args Feb 08 21:49:00 2 19 1500 devb-ahci 1.00A (Oct 20 2008 23:23:51) Feb 08 21:49:00 2 5 0 libcam.so (Oct 20 2008 23:22:34) bver 6040001 Feb 08 21:49:00 2 5 0 xpt_configure: ahci SIM attach failure Feb 08 21:49:00 2 19 0 devb-eide 1.00A (Oct 20 2008 23:27:28) Feb 08 21:49:00 2 5 0 libcam.so (Oct 20 2008 23:22:34) bver 6040001 Feb 08 21:49:00 2 19 0 eide_identify_devices: Intel 82801GB IDE vid 8086, did 27df, class 1018a rev 1, busno 0, dfunc f9 Feb 08 21:49:00 2 19 0 eide_identify_devices: cmd_addr 1f0, cntl_addr 3f4, irq e, chnl 0, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 0 status 50, error 0 Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 1 status 0, error 0 Feb 08 21:49:00 2 19 0 eide_identify: chk 4 cmd ec, tid 0, status 51, astatus 51, error 4 Feb 08 21:49:00 2 19 0 eide_display_devices: mdl Optiarc DVD RW AD-7220A sn fw 1.01 tid 0, cable 80, max udma 4, cur udma 4, max mdma 2, cur mdma 0, max sdma -1, cur sdma -1, pio 4, mblk 0 Feb 08 21:49:00 2 19 0 eide_init_devices: Optiarc DVD RW AD-7220A path 0, tid 0, udma 4, mdma 2, sdma -1, pio 4, mblk 0 Feb 08 21:49:00 2 19 0 eide_identify_devices: Intel 82801GB IDE vid 8086, did 27df, class 1018a rev 1, busno 0, dfunc f9 Feb 08 21:49:00 2 19 0 eide_identify_devices: cmd_addr 170, cntl_addr 374, irq f, chnl 1, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 0 status 7f, error 7f Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 1 status 7f, error 7f Feb 08 21:49:00 2 19 0 eide_identify_devices: Intel 82801GB SATA vid 8086, did 27c0, class 1018f rev 1, busno 0, dfunc fa Feb 08 21:49:00 2 19 0 eide_identify_devices: cmd_addr e880, cntl_addr e800, irq 5, chnl 0, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 0 status 50, error 0 Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 1 status 0, error 0 Feb 08 21:49:00 2 19 0 eide_display_devices: mdl ST380815AS sn 5QZ4NBK9 fw 3.AAD tid 0, cable 40, max udma 6, cur udma 5, max mdma 2, cur mdma 0, max sdma -1, cur sdma -1, pio 4, mblk 16 Feb 08 21:49:00 2 19 0 eide_init_devices: ST380815AS path 1, tid 0, udma 5, mdma 2, sdma -1, pio 4, mblk 16 Feb 08 21:49:00 2 19 0 eide_identify_devices: Intel 82801GB SATA vid 8086, did 27c0, class 1018f rev 1, busno 0, dfunc fa Feb 08 21:49:00 2 19 0 eide_identify_devices: cmd_addr e480, cntl_addr e400, irq 5, chnl 1, udma 5, mdma 2, sdma 0, pio 4 Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 0 status 7f, error ff Feb 08 21:49:00 2 19 0 eide_identify_devices: probing dev 1 status 7f, error ff Feb 08 21:49:00 2 5 200 cam-cdrom.so (Oct 20 2008 23:22:38) Feb 08 21:49:00 2 5 100 cam-disk.so (Oct 20 2008 23:22:41) Feb 08 21:49:04 2 19 1600 devb-mvSata 1.00A (Oct 20 2008 23:27:53) Feb 08 21:49:04 2 5 0 libcam.so (Oct 20 2008 23:22:34) bver 6040001 Feb 08 21:49:04 2 5 0 xpt_configure: No mvSata interfaces found Feb 08 21:49:06 5 14 0 tcpip starting Feb 08 21:49:06 3 14 0 Using pseudo random generator. See "random" option Feb 08 21:49:06 5 14 0 initializing IPsec... done Feb 08 21:49:06 5 14 0 IPsec: Initialized Security Association Processing. Feb 08 21:49:06 5 14 0 bge0 at pci1 dev 0 function 0: Broadcom BCM5787M Gigabit Ethernet Feb 08 21:49:06 5 14 0 bge0: interrupting at irq 5 Feb 08 21:49:06 5 14 0 bge0: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:18:7d:03:f4:d4 Feb 08 21:49:06 5 14 0 bge0: setting short Tx thresholds Feb 08 21:49:06 5 14 0 Find PHY, oui = 00000af7, model = 0000000e Feb 08 21:49:06 5 14 0 ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface Feb 08 21:49:06 5 14 0 ukphy0: OUI 0x000af7, model 0x000e, rev. 0 Feb 08 21:49:06 5 14 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto Feb 08 21:49:06 5 14 0 bge1 at pci2 dev 0 function 0: Broadcom BCM5787M Gigabit Ethernet Feb 08 21:49:06 5 14 0 bge1: interrupting at irq 7 Feb 08 21:49:06 5 14 0 bge1: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:18:7d:03:f4:d5 Feb 08 21:49:06 5 14 0 bge1: setting short Tx thresholds Feb 08 21:49:06 5 14 0 Find PHY, oui = 00000af7, model = 0000000e Feb 08 21:49:06 5 14 0 ukphy1 at bge1 phy 1: Generic IEEE 802.3u media interface Feb 08 21:49:06 5 14 0 ukphy1: OUI 0x000af7, model 0x000e, rev. 0 Feb 08 21:49:06 5 14 0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto Feb 08 21:49:15 2 5 100 cam-disk.so (Oct 20 2008 23:22:41) Feb 08 21:49:16 1 8 0 phfont.so: init... Feb 08 21:49:16 1 8 0 phfont.so: initialized. Feb 08 21:49:16 1 8 0 phfont.so: '/dev/phfont[<32|64>]' server installed. Feb 08 21:49:16 6 8 0 VGA primary : bus 0x0 dev/func 0x10 Feb 08 21:49:16 6 8 0 Found 1 PCI/AGP display devices Feb 08 21:49:16 6 8 0 pci_init: found PCI device 8086:2772