begin khronos
  begin egl display 1
    egl-dlls = libEGL-mesa.so
    glesv1-dlls = libglapi-mesa.so libGLESv1_CM-mesa.so
    glesv2-dlls = libglapi-mesa.so libGLESv2-mesa.so
  end egl display

  begin wfd device 1
    wfd-dlls = libwfdcfg-sample.so libWFDintel-drm.so

    # Run "drm-probe-displays" to list the available displays and pipelines,
    # and "use $GRAPHICS_ROOT/libWFDintel-drm.so" for more information on
    # these driver-specific settings.
    # Pipeline IDs 1 to 9 are used for DRM CRTCs.  One should be assigned
    # to each display that will be used.
    pipeline1-display = 7
    pipeline2-display = 1
    # Pipeline IDs 10 and above are used for DRM planes.  A plane can only
    # be used on a display with an active CRTC.
    pipeline10-display = 7
    pipeline11-display = 1
  end wfd device
end khronos

begin winmgr
  begin globals
    input = keyboard
    # Adjust the stack size of Screen's resmgr threads.  The default size
    # is insufficient for blitters/compositors using Mesa (e.g., gles2blt).
    stack-size = 32384  # in units of 1024 bytes
    blit-config = gles2blt
  end globals

  begin display 1
    video-mode = 1280 x 1024 @ 60
    # Adjust the stack size of Screen's composition thread; required when the
    # display's framebuffer uses Mesa (e.g. "usage = gles2"), as noted above.
    stack-size = 32384  # in units of 1024 bytes
  end display
  
  begin display 7
    video-mode = 1280 x 1024 @ 60
    stack-size = 32384  # in units of 1024 bytes
  end display

  begin class framebuffer
    # Be sure to configure the "pipeline%d-display" options (above) so the
    # specified display and pipeline are bindable.  Normally a framebuffer
    # will use a CRTC pipeline.
    display = 7
    pipeline = 1
    format = rgba8888
    usage = gles2blt
  end class
  
 #  begin class framebuffer2
    # Be sure to configure the "pipeline%d-display" options (above) so the
    # specified display and pipeline are bindable.  Normally a framebuffer
    # will use a CRTC pipeline.
 #   display = 1
 #   pipeline = 1
 #   format = rgba8888
 #   usage = gles2blt
 # end class
  
end winmgr