Its been a while since I installed QNX 4 in Vmware (and it jsut worked last
time I did it).  Off the top of my head the easiest thing to try is using a
smaller virtual disk.  I don't recall what the limits were but it is easy
enough to try and see if that makes a difference.

Usually when you get just the dots it means the disk geometry is different
between what the bios (virtual bios in this case) thinks and what QNX
thinks.

Hope that helps,

Rick..

On Tue, Jul 20, 2010 at 12:17 AM, Kiran Kumar <community-noreply@qnx.com>wrote:

> Hi,
>
> I have problem after installation. I have selected 2Gb virtual hard disk
> IDE, 512bm RAM, IDE CD/DVD drive, floppy auto detect, Network adapter NAT,
> Sound card auto detect,
> Display Auto detect.
>
> When I reboot the virtual machine it just hangs up with ........dots.
> What is going on I tried to install the virtual machine twice it gives the
> same problem. Am I doing something wrong here. Is there any other process to
> install the QNX 4.25 on vmware.
>
> But on the other hand I have installed the QNX Neutrino 6.3 in vmware it
> works absolutely fine. Because I am working on QNX 4.25 I need this to work
> for me.
>
> Thank you,
> Kumar
>
>
>
> _______________________________________________
>
> Support
> http://community.qnx.com/sf/go/post59906
>
>


-- 
Rick Duff
rgduff@gmail.com