Hello!

I am trying to install GCC 4.8.3 to my QNX6.5 SDP on Linux. I did the follows:

1) Copied already installed version for backup:
# cp -r /opt/qnx650 /opt/qnx650sp1

2) unpaked archive with GCC 4.8.3 (downloaded from here (http://community.qnx.com/sf/frs/do/viewRelease/projects.
toolchain/frs.gcc.gcc_4_8)  to /opt/qnx650:
# tar -xfnto-gcc-4.8.3-qnx65x.tar.gz -C /opt/qnx650

3) unpaked binutils (downloaded from here http://community.qnx.com/sf/frs/do/listReleases/projects.toolchain/frs.
binutils) :
# tar -xfnto-binutils-2.25.tar.gz -C /opt/qnx650

4) Renamed /opt/qnx650sp1-gcc483/host/linux/x86/etc/qcc/gcc/4.4.2 to /opt/qnx650sp1-gcc483/host/linux/x86/etc/qcc/gcc/4.
8.3

5) Launched Momentix IDE 7.0 and created new QNX C++ project: File->New->QNX Project->QNX Executable->C++ CPU x86

When I try to built such project I always get an error below:

qcc -lang-c++ -Vgcc_ntox86 -c -Wp,-MMD,build/x86-debug/src/test.d,-MT,build/x86-debug/src/test.o -o build/x86-debug/src/
test.o  -Wall -fmessage-length=0 -g -O0 -fno-builtin  src/test.cpp
cc: unknown target 'gcc_ntox86+debug'
cc: targets available in /opt/qnx650/host/linux/x86/etc/qcc/gcc:
	4.8.3,gcc_ntomipsle_acpp	
	4.8.3,gcc_ntoarmle_ecpp	
	4.8.3,gcc_ntoarmv7le_acpp-ne	
	4.8.3,gcc_ntoarmle_ecpp-ne	
	4.8.3,gcc_ntoarmv7le_acpp	
	4.8.3,gcc_ntoppcbespe_ecpp-ne	
	4.8.3,gcc_ntoppcbespe_acpp	
	4.8.3,gcc_ntoppcbe_cpp-ne	
	4.8.3,gcc_ntomipsle	
	4.8.3,gcc_ntoarmle_acpp	
	4.8.3,gcc_ntoppcbespe	
	4.8.3,gcc_ntox86_cpp	
	4.8.3,gcc_ntox86_ecpp-ne	
	4.8.3,gcc_ntoarmv7le	
	4.8.3,gcc_ntoppcbe_acpp-ne	
	4.8.3,gcc_ntomipsbe_acpp	
	4.8.3,gcc_ntoppcbe	
	4.8.3,gcc_ntoppcbe_cpp	
	4.8.3,gcc_ntoshle_ecpp-ne	
	4.8.3,gcc_ntoshle_ecpp	
	4.8.3,gcc_ntoarmle_cpp	
	4.8.3,gcc_ntomipsle_cpp-ne	
	4.8.3,gcc_ntomipsle_gpp	
	4.8.3,gcc_ntoppcbe_acpp	
	4.8.3,gcc_ntoshle_cpp-ne	
	4.8.3,gcc_ntomipsbe_cpp	
	4.8.3,gcc_ntomipsbe_cpp-ne	
	4.8.3,gcc_ntoppcbespe_ecpp	
	4.8.3,gcc_ntomipsle_cpp	
	4.8.3,gcc_ntomipsbe_ecpp	
	4.8.3,gcc_ntox86_gpp	
	4.8.3,gcc_ntoarmv7le_cpp	
	4.8.3,gcc_ntoppcbespe_acpp-ne	
	4.8.3,gcc_ntox86_ecpp	
	4.8.3,gcc_ntoshle	
	4.8.3,gcc_ntomipsle_acpp-ne	
	4.8.3,gcc_ntomipsle_ecpp	
	4.8.3,gcc_ntox86_acpp-ne	
	4.8.3,gcc_ntomipsle_ecpp-ne	
	4.8.3,gcc_ntoshle_cpp	
	4.8.3,gcc_ntoppcbe_ecpp-ne	
	4.8.3,gcc_ntoarmle	
	4.8.3,gcc_ntoppcbespe_gpp	
	4.8.3,gcc_ntoarmv7le_gpp	
	4.8.3,gcc_ntoarmv7le_ecpp-ne	
	4.8.3,gcc_ntox86_acpp	
	4.8.3,gcc_ntomipsbe_ecpp-ne	
	4.8.3,gcc_ntoarmle_gpp	
	4.8.3,gcc_ntomipsbe_gpp	
	4.8.3,gcc_ntoarmv7le_cpp-ne	
	4.8.3,gcc_ntoppcbe_ecpp	
	4.8.3,gcc_ntoarmv7le_ecpp	
	4.8.3,gcc_ntoshle_acpp-ne	
	4.8.3,gcc_ntoppcbespe_cpp	
	4.8.3,gcc_ntoshle_gpp	
	4.8.3,gcc_ntoppcbe_gpp	
	4.8.3,gcc_ntoarmle_acpp-ne	
	4.8.3,gcc_ntoarmle_cpp-ne	
	4.8.3,gcc_ntoshle_acpp	
	4.8.3,gcc_ntomipsbe_acpp-ne	
	4.8.3,gcc_ntoppcbespe_cpp-ne	
	4.8.3,gcc_ntox86_cpp-ne	
	4.8.3,gcc_ntox86	
	4.8.3,gcc_ntomipsbe	
make: *** [build/x86-debug/src/test.o] Error 1


What am I doing wrong?