Project Home
Project Home		 Wiki
Wiki		 Discussion Forums
Discussions		 Project Information
Project Info
QNX RTOS v4 [EOL]/Discussion/General/Network problems /List of Posts
Forum Topic - Network problems : (8 Items)
   
Update
Nicholas Fagan(deleted)
03/03/2015 2:41 PM
post113487
Network problems   
We are evaluating an AAEON 6614 Box PC with the following specs:
CPU	Intel® Quad Core 1.83GHz SoC N2930
Memory	DDR3L 1333 SODIMM x 1, Max. 8GB
Display	VGA x 1, HDMI x 1
Ethernet	Gigabit Ethernet, RJ-45 connector x 2 (i211)
Storage        SATA 3.0Gb/s 2.5” HDD/SSD Bay x 1 CFastTM Slot x 1 (W/ cover protection)

Starting the network driver (Net.e1000) causes Net to crash.
We see the following messages
Find device -x1539 - status 0x0
Read status 0x0
//1/bin/Net terminated (SIGSEGV) at 0015:000003D8
Net.e1000 INITIALIZATION ERROR 3
net_reg failed

If Net is started with the -v option, then "Net : Runtime Error 0035  Net: Runtime Error 0007" continually are output to
 the display.

Please help!
Attachment: Text 6614pci.txt 9.36 KB
Hugh Brown
03/03/2015 2:47 PM
post113488
Re: Network problems   
Please try the attached driver.



On 2015/3/3, 2:41 PM, "Nicholas Fagan" <community-noreply@qnx.com> wrote:

>We are evaluating an AAEON 6614 Box PC with the following specs:
>CPU	Intel® Quad Core 1.83GHz SoC N2930
>Memory	DDR3L 1333 SODIMM x 1, Max. 8GB
>Display	VGA x 1, HDMI x 1
>Ethernet	Gigabit Ethernet, RJ-45 connector x 2 (i211)
>Storage        SATA 3.0Gb/s 2.5² HDD/SSD Bay x 1 CFastTM Slot x 1 (W/
>cover protection)
>
>Starting the network driver (Net.e1000) causes Net to crash.
>We see the following messages
>Find device -x1539 - status 0x0
>Read status 0x0
>//1/bin/Net terminated (SIGSEGV) at 0015:000003D8
>Net.e1000 INITIALIZATION ERROR 3
>net_reg failed
>
>If Net is started with the -v option, then "Net : Runtime Error 0035
>Net: Runtime Error 0007" continually are output to the display.
>
>Please help!
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post113487
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com
Attachment: Text Net.e1000 192.51 KB
Nicholas Fagan(deleted)
03/04/2015 7:08 AM
post113491
Re: Network problems   
Here's what I see with the supplied Net..e1000 driver. (Net is version 4.25G July 6, 2010)
Start Net from the command line, then Net.e1000 -v &
Device 1539 - Revision 3
After fix-ups FlowControl is now = 0
Forcing Speed and Duplex
M88E1000 PSCR: 0x3150
Full Duplex
Forcing 10mb
Unable to establish link!!!
Initializing Flow Control address, type and regs.
Masking off all interrupts
NVM word 0x03 is not mapped
NVM word oxo3 is not mapped
Masking off all interrupts
NVM word oxo3 is not mapped

//1/bin/Net terminated (SIGSEGV) at 0015:000003D8
Net.e1000 INITIALIZATION ERROR 3
Hugh Brown
03/04/2015 9:13 AM
post113493
Re: Network problems   
I¹ll have to take a look at the when I get a chance.



On 2015/3/4, 7:08 AM, "Nicholas Fagan" <community-noreply@qnx.com> wrote:

>Here's what I see with the supplied Net..e1000 driver. (Net is version
>4.25G July 6, 2010)
>Start Net from the command line, then Net.e1000 -v &
>Device 1539 - Revision 3
>After fix-ups FlowControl is now = 0
>Forcing Speed and Duplex
>M88E1000 PSCR: 0x3150
>Full Duplex
>Forcing 10mb
>Unable to establish link!!!
>Initializing Flow Control address, type and regs.
>Masking off all interrupts
>NVM word 0x03 is not mapped
>NVM word oxo3 is not mapped
>Masking off all interrupts
>NVM word oxo3 is not mapped
>
>//1/bin/Net terminated (SIGSEGV) at 0015:000003D8
>Net.e1000 INITIALIZATION ERROR 3
>
>
>
> 
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post113491
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com
Nicholas Fagan(deleted)
03/04/2015 9:21 AM
post113494
RE: Network problems   
Hugh,
We are in crisis mode here as our current working model stock  (now EOL)  is quickly being depleted.
Any help would be appreciated.
Thanks,
Nick F.

-----Original Message-----
From: Hugh Brown [mailto:community-noreply@qnx.com] 
Sent: Wednesday, March 04, 2015 9:13 AM
To: general-qnx4@community.qnx.com
Subject: Re: Network problems

I¹ll have to take a look at the when I get a chance.



On 2015/3/4, 7:08 AM, "Nicholas Fagan" <community-noreply@qnx.com> wrote:

>Here's what I see with the supplied Net..e1000 driver. (Net is version 
>4.25G July 6, 2010) Start Net from the command line, then Net.e1000 -v 
>& Device 1539 - Revision 3 After fix-ups FlowControl is now = 0 Forcing 
>Speed and Duplex
>M88E1000 PSCR: 0x3150
>Full Duplex
>Forcing 10mb
>Unable to establish link!!!
>Initializing Flow Control address, type and regs.
>Masking off all interrupts
>NVM word 0x03 is not mapped
>NVM word oxo3 is not mapped
>Masking off all interrupts
>NVM word oxo3 is not mapped
>
>//1/bin/Net terminated (SIGSEGV) at 0015:000003D8
>Net.e1000 INITIALIZATION ERROR 3
>
>
>
> 
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post113491
>To cancel your subscription to this discussion, please e-mail 
>general-qnx4-unsubscribe@community.qnx.com





_______________________________________________

General
http://community.qnx.com/sf/go/post113493
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
Hugh Brown
03/04/2015 9:29 AM
post113495
Re: Network problems   
Unfortunately I’m busy with very high priority work right now, so cannot
look at anything else.
Your best bet is to contact your sales rep to escalate this problem.



On 2015/3/4, 9:21 AM, "Nick Fagan" <community-noreply@qnx.com> wrote:

>Hugh,
>We are in crisis mode here as our current working model stock  (now EOL)
>is quickly being depleted.
>Any help would be appreciated.
>Thanks,
>Nick F.
>
>-----Original Message-----
>From: Hugh Brown [mailto:community-noreply@qnx.com]
>Sent: Wednesday, March 04, 2015 9:13 AM
>To: general-qnx4@community.qnx.com
>Subject: Re: Network problems
>
>I¹ll have to take a look at the when I get a chance.
>
>
>
>On 2015/3/4, 7:08 AM, "Nicholas Fagan" <community-noreply@qnx.com> wrote:
>
>>Here's what I see with the supplied Net..e1000 driver. (Net is version
>>4.25G July 6, 2010) Start Net from the command line, then Net.e1000 -v
>>& Device 1539 - Revision 3 After fix-ups FlowControl is now = 0 Forcing
>>Speed and Duplex
>>M88E1000 PSCR: 0x3150
>>Full Duplex
>>Forcing 10mb
>>Unable to establish link!!!
>>Initializing Flow Control address, type and regs.
>>Masking off all interrupts
>>NVM word 0x03 is not mapped
>>NVM word oxo3 is not mapped
>>Masking off all interrupts
>>NVM word oxo3 is not mapped
>>
>>//1/bin/Net terminated (SIGSEGV) at 0015:000003D8
>>Net.e1000 INITIALIZATION ERROR 3
>>
>>
>>
>> 
>>
>>
>>
>>_______________________________________________
>>
>>General
>>http://community.qnx.com/sf/go/post113491
>>To cancel your subscription to this discussion, please e-mail
>>general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post113493
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>_______________________________________________
>
>General
>http://community.qnx.com/sf/go/post113494
>To cancel your subscription to this discussion, please e-mail
>general-qnx4-unsubscribe@community.qnx.com
Harry Qualls(deleted)
03/16/2015 1:35 PM
post113556
Re: Network problems   
How are you starting the Ethernet card driver? I have a laptop that had a similar problem and I ended up manually 
starting the driver using the options to specify the vendor and the ID. Then after running that I put in a sleep 5 
command. for some reason it takes a little longer for the driver to finish initializing.

  Hope it helps
Nicholas Fagan(deleted)
03/17/2015 6:42 AM
post113561
RE: Network problems   
Hi Harry,

Here's the network starting sequence from sysinit

~~~~~~~~~~~~~~~~~~
Net &
Net.e1000 -l1 &
 sleep 5 
 netboot &
 
nameloc &

~~~~~~~~~~~~~~~~~~


-----Original Message-----
From: Harry Qualls [mailto:community-noreply@qnx.com] 
Sent: Monday, March 16, 2015 1:35 PM
To: general-qnx4
Subject: Re: Network problems

How are you starting the Ethernet card driver? I have a laptop that had a similar problem and I ended up manually 
starting the driver using the options to specify the vendor and the ID. Then after running that I put in a sleep 5 
command. for some reason it takes a little longer for the driver to finish initializing.

  Hope it helps




_______________________________________________

General
http://community.qnx.com/sf/go/post113556
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com

Return


  A subsidiary of BlackBerry             All content ©2004-2013, QNX Software Systems