Pete Mackereth(deleted)
01/02/2015 11:43 AM
post112804
|
Hello,
We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
We are having a problem with the graphics driver.
From show_pci:
PCI version = 3.00
Class = Display (VGA)
Vendor ID = 8086h, INTEL CORPORATION
Device ID = 29b2h,
PCI index = 0h
MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
PCI Int Pin = INT A
Interrupt line = 10
Does anyone have any ideas?
Thanks,
Pete Mackereth
|
|
|
Oleg Bolshakov
01/02/2015 1:07 PM
post112805
|
Hi Pete,
What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and Pg.
i915.
Respectfully,
Oleg
> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>
> Hello,
>
> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>
> We are having a problem with the graphics driver.
>
> From show_pci:
>
> PCI version = 3.00
>
> Class = Display (VGA)
> Vendor ID = 8086h, INTEL CORPORATION
> Device ID = 29b2h,
> PCI index = 0h
> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
> PCI Int Pin = INT A
> Interrupt line = 10
>
> Does anyone have any ideas?
>
> Thanks,
> Pete Mackereth
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112804
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Pete Mackereth(deleted)
01/12/2015 7:32 AM
post112903
|
Hi Oleg,
Did you get the chance to look at the Pg.i830 driver for the 29b2h, I am still having problems.
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 02 January 2015 18:07
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and Pg.
i915.
Respectfully,
Oleg
> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>
> Hello,
>
> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>
> We are having a problem with the graphics driver.
>
> From show_pci:
>
> PCI version = 3.00
>
> Class = Display (VGA)
> Vendor ID = 8086h, INTEL CORPORATION
> Device ID = 29b2h,
> PCI index = 0h
> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
> PCI Int Pin = INT A
> Interrupt line = 10
>
> Does anyone have any ideas?
>
> Thanks,
> Pete Mackereth
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112804
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
_______________________________________________
General
http://community.qnx.com/sf/go/post112805
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Oleg Bolshakov
01/12/2015 8:31 AM
post112904
|
Hi Pete,
Sorry for the delay with my answer. I've noticed that you tested only 8-bit colour modes with Pg.i830. Try 32-bit mode.
To do this place 32-bit mode line at the top of crt.$NODE, restart the PC and launch ph script. Try different modes like
800x600x32, 1024x768x32, etc. Don't forget to place each line at the top of your crt.$NODE and restart the PC before
launch ph to perform neat testing.
Respectfully,
Oleg
12 янв. 2015 г., в 15:31:23, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> Did you get the chance to look at the Pg.i830 driver for the 29b2h, I am still having problems.
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 02 January 2015 18:07
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>
> Respectfully,
> Oleg
>
>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>
>> Hello,
>>
>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>
>> We are having a problem with the graphics driver.
>>
>> From show_pci:
>>
>> PCI version = 3.00
>>
>> Class = Display (VGA)
>> Vendor ID = 8086h, INTEL CORPORATION
>> Device ID = 29b2h,
>> PCI index = 0h
>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>> PCI Int Pin = INT A
>> Interrupt line = 10
>>
>> Does anyone have any ideas?
>>
>> Thanks,
>> Pete Mackereth
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112804
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112805
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112903
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Pete Mackereth(deleted)
01/12/2015 8:42 AM
post112905
|
Hi Oleg,
That's done the trick, thank you!
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 12 January 2015 12:31
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
Sorry for the delay with my answer. I've noticed that you tested only 8-bit colour modes with Pg.i830. Try 32-bit mode.
To do this place 32-bit mode line at the top of crt.$NODE, restart the PC and launch ph script. Try different modes like
800x600x32, 1024x768x32, etc. Don't forget to place each line at the top of your crt.$NODE and restart the PC before
launch ph to perform neat testing.
Respectfully,
Oleg
12 янв. 2015 г., в 15:31:23, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> Did you get the chance to look at the Pg.i830 driver for the 29b2h, I am still having problems.
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 02 January 2015 18:07
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>
> Respectfully,
> Oleg
>
>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>
>> Hello,
>>
>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>
>> We are having a problem with the graphics driver.
>>
>> From show_pci:
>>
>> PCI version = 3.00
>>
>> Class = Display (VGA)
>> Vendor ID = 8086h, INTEL CORPORATION
>> Device ID = 29b2h,
>> PCI index = 0h
>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>> PCI Int Pin = INT A
>> Interrupt line = 10
>>
>> Does anyone have any ideas?
>>
>> Thanks,
>> Pete Mackereth
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112804
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112805
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112903
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
_______________________________________________
General
http://community.qnx.com/sf/go/post112904
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Oleg Bolshakov
01/12/2015 9:06 AM
post112906
|
Pete,
I'm glad to hear that your problem has been solved. Can you also try 32-bit modes with Pg.i915?
Respectfully,
Oleg
12 янв. 2015 г., в 16:42:37, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> That's done the trick, thank you!
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 12 January 2015 12:31
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> Sorry for the delay with my answer. I've noticed that you tested only 8-bit colour modes with Pg.i830. Try 32-bit mode
. To do this place 32-bit mode line at the top of crt.$NODE, restart the PC and launch ph script. Try different modes
like 800x600x32, 1024x768x32, etc. Don't forget to place each line at the top of your crt.$NODE and restart the PC
before launch ph to perform neat testing.
>
> Respectfully,
> Oleg
>
> 12 янв. 2015 г., в 15:31:23, Pete Mackereth <community-noreply@qnx.com> написал:
>
>> Hi Oleg,
>>
>> Did you get the chance to look at the Pg.i830 driver for the 29b2h, I am still having problems.
>>
>> Regards,
>> Pete
>>
>> -----Original Message-----
>> From: Олег Большаков [mailto:community-noreply@qnx.com]
>> Sent: 02 January 2015 18:07
>> To: general-qnx4@community.qnx.com
>> Subject: Re: Advantech IPC-610H
>>
>> Hi Pete,
>>
>> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>>
>> Respectfully,
>> Oleg
>>
>>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>>
>>> Hello,
>>>
>>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>>
>>> We are having a problem with the graphics driver.
>>>
>>> From show_pci:
>>>
>>> PCI version = 3.00
>>>
>>> Class = Display (VGA)
>>> Vendor ID = 8086h, INTEL CORPORATION
>>> Device ID = 29b2h,
>>> PCI index = 0h
>>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>>> PCI Int Pin = INT A
>>> Interrupt line = 10
>>>
>>> Does anyone have any ideas?
>>>
>>> Thanks,
>>> Pete Mackereth
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> General
>>> http://community.qnx.com/sf/go/post112804
>>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112805
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112903
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112904
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
> _______________________________________________
>
> General
>...
|
|
|
Pete Mackereth(deleted)
01/13/2015 12:47 PM
post112922
|
Hi Oleg,
Pg.i915 also works at 1024x768x32.
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 12 January 2015 13:06
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Pete,
I'm glad to hear that your problem has been solved. Can you also try 32-bit modes with Pg.i915?
Respectfully,
Oleg
12 янв. 2015 г., в 16:42:37, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> That's done the trick, thank you!
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 12 January 2015 12:31
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> Sorry for the delay with my answer. I've noticed that you tested only 8-bit colour modes with Pg.i830. Try 32-bit mode
. To do this place 32-bit mode line at the top of crt.$NODE, restart the PC and launch ph script. Try different modes
like 800x600x32, 1024x768x32, etc. Don't forget to place each line at the top of your crt.$NODE and restart the PC
before launch ph to perform neat testing.
>
> Respectfully,
> Oleg
>
> 12 янв. 2015 г., в 15:31:23, Pete Mackereth <community-noreply@qnx.com> написал:
>
>> Hi Oleg,
>>
>> Did you get the chance to look at the Pg.i830 driver for the 29b2h, I am still having problems.
>>
>> Regards,
>> Pete
>>
>> -----Original Message-----
>> From: Олег Большаков [mailto:community-noreply@qnx.com]
>> Sent: 02 January 2015 18:07
>> To: general-qnx4@community.qnx.com
>> Subject: Re: Advantech IPC-610H
>>
>> Hi Pete,
>>
>> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>>
>> Respectfully,
>> Oleg
>>
>>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>>
>>> Hello,
>>>
>>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>>
>>> We are having a problem with the graphics driver.
>>>
>>> From show_pci:
>>>
>>> PCI version = 3.00
>>>
>>> Class = Display (VGA)
>>> Vendor ID = 8086h, INTEL CORPORATION
>>> Device ID = 29b2h,
>>> PCI index = 0h
>>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>>> PCI Int Pin = INT A
>>> Interrupt line = 10
>>>
>>> Does anyone have any ideas?
>>>
>>> Thanks,
>>> Pete Mackereth
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> General
>>> http://community.qnx.com/sf/go/post112804
>>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112805
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112903
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
>...
|
|
|
Oleg Bolshakov
01/14/2015 9:31 AM
post112938
|
Thank you.
Respectfully,
Oleg
13 янв. 2015 г., в 20:46:58, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> Pg.i915 also works at 1024x768x32.
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 12 January 2015 13:06
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Pete,
>
> I'm glad to hear that your problem has been solved. Can you also try 32-bit modes with Pg.i915?
>
> Respectfully,
> Oleg
>
> 12 янв. 2015 г., в 16:42:37, Pete Mackereth <community-noreply@qnx.com> написал:
>
>> Hi Oleg,
>>
>> That's done the trick, thank you!
>>
>> Regards,
>> Pete
>>
>> -----Original Message-----
>> From: Олег Большаков [mailto:community-noreply@qnx.com]
>> Sent: 12 January 2015 12:31
>> To: general-qnx4@community.qnx.com
>> Subject: Re: Advantech IPC-610H
>>
>> Hi Pete,
>>
>> Sorry for the delay with my answer. I've noticed that you tested only 8-bit colour modes with Pg.i830. Try 32-bit
mode. To do this place 32-bit mode line at the top of crt.$NODE, restart the PC and launch ph script. Try different
modes like 800x600x32, 1024x768x32, etc. Don't forget to place each line at the top of your crt.$NODE and restart the PC
before launch ph to perform neat testing.
>>
>> Respectfully,
>> Oleg
>>
>> 12 янв. 2015 г., в 15:31:23, Pete Mackereth <community-noreply@qnx.com> написал:
>>
>>> Hi Oleg,
>>>
>>> Did you get the chance to look at the Pg.i830 driver for the 29b2h, I am still having problems.
>>>
>>> Regards,
>>> Pete
>>>
>>> -----Original Message-----
>>> From: Олег Большаков [mailto:community-noreply@qnx.com]
>>> Sent: 02 January 2015 18:07
>>> To: general-qnx4@community.qnx.com
>>> Subject: Re: Advantech IPC-610H
>>>
>>> Hi Pete,
>>>
>>> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>>>
>>> Respectfully,
>>> Oleg
>>>
>>>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>>>
>>>> Hello,
>>>>
>>>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>>>
>>>> We are having a problem with the graphics driver.
>>>>
>>>> From show_pci:
>>>>
>>>> PCI version = 3.00
>>>>
>>>> Class = Display (VGA)
>>>> Vendor ID = 8086h, INTEL CORPORATION
>>>> Device ID = 29b2h,
>>>> PCI index = 0h
>>>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>>>> PCI Int Pin = INT A
>>>> Interrupt line = 10
>>>>
>>>> Does anyone have any ideas?
>>>>
>>>> Thanks,
>>>> Pete Mackereth
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>> General
>>>> http://community.qnx.com/sf/go/post112804
>>>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> General
>>>...
View Full Message
|
|
|
Oleg Bolshakov
01/02/2015 1:07 PM
post112806
|
Hi Pete,
What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and Pg.
i915.
Respectfully,
Oleg
> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>
> Hello,
>
> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>
> We are having a problem with the graphics driver.
>
> From show_pci:
>
> PCI version = 3.00
>
> Class = Display (VGA)
> Vendor ID = 8086h, INTEL CORPORATION
> Device ID = 29b2h,
> PCI index = 0h
> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
> PCI Int Pin = INT A
> Interrupt line = 10
>
> Does anyone have any ideas?
>
> Thanks,
> Pete Mackereth
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112804
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Pete Mackereth(deleted)
01/05/2015 6:29 AM
post112815
|
Hi Oleg,
Thanks for the quick reply.
I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
I have attached some diagnostic information, I hope it helps.
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 02 January 2015 18:07
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and Pg.
i915.
Respectfully,
Oleg
> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>
> Hello,
>
> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>
> We are having a problem with the graphics driver.
>
> From show_pci:
>
> PCI version = 3.00
>
> Class = Display (VGA)
> Vendor ID = 8086h, INTEL CORPORATION
> Device ID = 29b2h,
> PCI index = 0h
> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
> PCI Int Pin = INT A
> Interrupt line = 10
>
> Does anyone have any ideas?
>
> Thanks,
> Pete Mackereth
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112804
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
_______________________________________________
General
http://community.qnx.com/sf/go/post112806
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Oleg Bolshakov
01/05/2015 9:17 AM
post112817
|
Hi Pete,
Sorry for my mistake, I meant Pg.i830 instead of Pg.i810. Please try Pg.i830. Also try Hydra.ms / Pg.flat*. What type of
connection (VGA, HDMI) do you use? I’ll examine your diagnostic information.
Respectfully,
Oleg
5 янв. 2015 г., в 14:27, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> Thanks for the quick reply.
>
> I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
>
> When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
>
> I have attached some diagnostic information, I hope it helps.
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 02 January 2015 18:07
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>
> Respectfully,
> Oleg
>
>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>
>> Hello,
>>
>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>
>> We are having a problem with the graphics driver.
>>
>> From show_pci:
>>
>> PCI version = 3.00
>>
>> Class = Display (VGA)
>> Vendor ID = 8086h, INTEL CORPORATION
>> Device ID = 29b2h,
>> PCI index = 0h
>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>> PCI Int Pin = INT A
>> Interrupt line = 10
>>
>> Does anyone have any ideas?
>>
>> Thanks,
>> Pete Mackereth
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112804
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112806
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112815
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
> <Diags.tar>
|
|
|
Pete Mackereth(deleted)
01/05/2015 9:24 AM
post112820
|
Hi Oleg,
It's VGA.
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 05 January 2015 14:18
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
Sorry for my mistake, I meant Pg.i830 instead of Pg.i810. Please try Pg.i830. Also try Hydra.ms / Pg.flat*. What type of
connection (VGA, HDMI) do you use? I’ll examine your diagnostic information.
Respectfully,
Oleg
5 янв. 2015 г., в 14:27, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> Thanks for the quick reply.
>
> I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
>
> When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
>
> I have attached some diagnostic information, I hope it helps.
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 02 January 2015 18:07
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>
> Respectfully,
> Oleg
>
>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>
>> Hello,
>>
>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>
>> We are having a problem with the graphics driver.
>>
>> From show_pci:
>>
>> PCI version = 3.00
>>
>> Class = Display (VGA)
>> Vendor ID = 8086h, INTEL CORPORATION
>> Device ID = 29b2h,
>> PCI index = 0h
>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>> PCI Int Pin = INT A
>> Interrupt line = 10
>>
>> Does anyone have any ideas?
>>
>> Thanks,
>> Pete Mackereth
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112804
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112806
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112815
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
> <Diags.tar>
_______________________________________________
General
http://community.qnx.com/sf/go/post112817
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Pete Mackereth(deleted)
01/05/2015 10:35 AM
post112824
|
Hi Oleg,
See attached for a list of the drivers I've tried, the only one that works is the safe mode.
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 05 January 2015 14:18
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
Sorry for my mistake, I meant Pg.i830 instead of Pg.i810. Please try Pg.i830. Also try Hydra.ms / Pg.flat*. What type of
connection (VGA, HDMI) do you use? I’ll examine your diagnostic information.
Respectfully,
Oleg
5 янв. 2015 г., в 14:27, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> Thanks for the quick reply.
>
> I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
>
> When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
>
> I have attached some diagnostic information, I hope it helps.
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 02 January 2015 18:07
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>
> Respectfully,
> Oleg
>
>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>
>> Hello,
>>
>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>
>> We are having a problem with the graphics driver.
>>
>> From show_pci:
>>
>> PCI version = 3.00
>>
>> Class = Display (VGA)
>> Vendor ID = 8086h, INTEL CORPORATION
>> Device ID = 29b2h,
>> PCI index = 0h
>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>> PCI Int Pin = INT A
>> Interrupt line = 10
>>
>> Does anyone have any ideas?
>>
>> Thanks,
>> Pete Mackereth
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112804
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112806
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112815
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
> <Diags.tar>
_______________________________________________
General
http://community.qnx.com/sf/go/post112817
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Pete Mackereth(deleted)
01/06/2015 12:35 PM
post112840
|
Hi Oleg,
Did you manage to find anything?
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 05 January 2015 14:18
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
Sorry for my mistake, I meant Pg.i830 instead of Pg.i810. Please try Pg.i830. Also try Hydra.ms / Pg.flat*. What type of
connection (VGA, HDMI) do you use? I’ll examine your diagnostic information.
Respectfully,
Oleg
5 янв. 2015 г., в 14:27, Pete Mackereth <community-noreply@qnx.com> написал:
> Hi Oleg,
>
> Thanks for the quick reply.
>
> I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
>
> When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
>
> I have attached some diagnostic information, I hope it helps.
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 02 January 2015 18:07
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>
> Respectfully,
> Oleg
>
>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>
>> Hello,
>>
>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>
>> We are having a problem with the graphics driver.
>>
>> From show_pci:
>>
>> PCI version = 3.00
>>
>> Class = Display (VGA)
>> Vendor ID = 8086h, INTEL CORPORATION
>> Device ID = 29b2h,
>> PCI index = 0h
>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>> PCI Int Pin = INT A
>> Interrupt line = 10
>>
>> Does anyone have any ideas?
>>
>> Thanks,
>> Pete Mackereth
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112804
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112806
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112815
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
> <Diags.tar>
_______________________________________________
General
http://community.qnx.com/sf/go/post112817
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
|
|
|
Oleg Bolshakov
01/06/2015 12:48 PM
post112841
|
Hi Pete,
Did you try resolutions other than 1024x768? Try 640x480 and 800x600 too.
Respectfully,
Oleg
> 6 янв. 2015 г., в 20:34, Pete Mackereth <community-noreply@qnx.com> написал:
>
> Hi Oleg,
>
> Did you manage to find anything?
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 05 January 2015 14:18
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> Sorry for my mistake, I meant Pg.i830 instead of Pg.i810. Please try Pg.i830. Also try Hydra.ms / Pg.flat*. What type
of connection (VGA, HDMI) do you use? I’ll examine your diagnostic information.
>
> Respectfully,
> Oleg
>
> 5 янв. 2015 г., в 14:27, Pete Mackereth <community-noreply@qnx.com> написал:
>
>> Hi Oleg,
>>
>> Thanks for the quick reply.
>>
>> I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
>>
>> When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
>>
>> I have attached some diagnostic information, I hope it helps.
>>
>> Regards,
>> Pete
>>
>> -----Original Message-----
>> From: Олег Большаков [mailto:community-noreply@qnx.com]
>> Sent: 02 January 2015 18:07
>> To: general-qnx4@community.qnx.com
>> Subject: Re: Advantech IPC-610H
>>
>> Hi Pete,
>>
>> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>>
>> Respectfully,
>> Oleg
>>
>>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>>
>>> Hello,
>>>
>>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>>
>>> We are having a problem with the graphics driver.
>>>
>>> From show_pci:
>>>
>>> PCI version = 3.00
>>>
>>> Class = Display (VGA)
>>> Vendor ID = 8086h, INTEL CORPORATION
>>> Device ID = 29b2h,
>>> PCI index = 0h
>>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>>> PCI Int Pin = INT A
>>> Interrupt line = 10
>>>
>>> Does anyone have any ideas?
>>>
>>> Thanks,
>>> Pete Mackereth
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> General
>>> http://community.qnx.com/sf/go/post112804
>>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112806
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112815
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>> <Diags.tar>
>
>
>
>
>
> _______________________________________________
>
> General
> http://community.qnx.com/sf/go/post112817
> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>
>
>
>
>...
|
|
|
Pete Mackereth(deleted)
01/07/2015 6:59 AM
post112852
|
Hi Oleg,
I've tried all the combinations shown in the attached file without success.
Any other ideas?
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 06 January 2015 17:49
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
Did you try resolutions other than 1024x768? Try 640x480 and 800x600 too.
Respectfully,
Oleg
> 6 янв. 2015 г., в 20:34, Pete Mackereth <community-noreply@qnx.com> написал:
>
> Hi Oleg,
>
> Did you manage to find anything?
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 05 January 2015 14:18
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> Sorry for my mistake, I meant Pg.i830 instead of Pg.i810. Please try Pg.i830. Also try Hydra.ms / Pg.flat*. What type
of connection (VGA, HDMI) do you use? I’ll examine your diagnostic information.
>
> Respectfully,
> Oleg
>
> 5 янв. 2015 г., в 14:27, Pete Mackereth <community-noreply@qnx.com> написал:
>
>> Hi Oleg,
>>
>> Thanks for the quick reply.
>>
>> I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
>>
>> When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
>>
>> I have attached some diagnostic information, I hope it helps.
>>
>> Regards,
>> Pete
>>
>> -----Original Message-----
>> From: Олег Большаков [mailto:community-noreply@qnx.com]
>> Sent: 02 January 2015 18:07
>> To: general-qnx4@community.qnx.com
>> Subject: Re: Advantech IPC-610H
>>
>> Hi Pete,
>>
>> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>>
>> Respectfully,
>> Oleg
>>
>>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>>
>>> Hello,
>>>
>>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>>
>>> We are having a problem with the graphics driver.
>>>
>>> From show_pci:
>>>
>>> PCI version = 3.00
>>>
>>> Class = Display (VGA)
>>> Vendor ID = 8086h, INTEL CORPORATION
>>> Device ID = 29b2h,
>>> PCI index = 0h
>>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>>> PCI Int Pin = INT A
>>> Interrupt line = 10
>>>
>>> Does anyone have any ideas?
>>>
>>> Thanks,
>>> Pete Mackereth
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> General
>>> http://community.qnx.com/sf/go/post112804
>>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112806
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112815
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>...
View Full Message
|
|
|
Pete Mackereth(deleted)
01/08/2015 7:19 AM
post112871
|
Hi Oleg,
I have still not had any success, any other suggestions?
Regards,
Pete
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 06 January 2015 17:49
To: general-qnx4@community.qnx.com
Subject: Re: Advantech IPC-610H
Hi Pete,
Did you try resolutions other than 1024x768? Try 640x480 and 800x600 too.
Respectfully,
Oleg
> 6 янв. 2015 г., в 20:34, Pete Mackereth <community-noreply@qnx.com> написал:
>
> Hi Oleg,
>
> Did you manage to find anything?
>
> Regards,
> Pete
>
> -----Original Message-----
> From: Олег Большаков [mailto:community-noreply@qnx.com]
> Sent: 05 January 2015 14:18
> To: general-qnx4@community.qnx.com
> Subject: Re: Advantech IPC-610H
>
> Hi Pete,
>
> Sorry for my mistake, I meant Pg.i830 instead of Pg.i810. Please try Pg.i830. Also try Hydra.ms / Pg.flat*. What type
of connection (VGA, HDMI) do you use? I’ll examine your diagnostic information.
>
> Respectfully,
> Oleg
>
> 5 янв. 2015 г., в 14:27, Pete Mackereth <community-noreply@qnx.com> написал:
>
>> Hi Oleg,
>>
>> Thanks for the quick reply.
>>
>> I have now tried Pg.i810 and Pg.i915 and they both fail, Pg.i810 seems to crash the PC whilst i915 shows only a black
screen.
>>
>> When running Pg.i915 the driver runs and I can attach using a phindows session as expected.
>>
>> I have attached some diagnostic information, I hope it helps.
>>
>> Regards,
>> Pete
>>
>> -----Original Message-----
>> From: Олег Большаков [mailto:community-noreply@qnx.com]
>> Sent: 02 January 2015 18:07
>> To: general-qnx4@community.qnx.com
>> Subject: Re: Advantech IPC-610H
>>
>> Hi Pete,
>>
>> What kind of problem do you have? What driver do you try? Intel Q35 (8086h:29b2h) should be supported by Pg.i810 and
Pg.i915.
>>
>> Respectfully,
>> Oleg
>>
>>> 2 янв. 2015 г., в 19:43, Pete Mackereth <community-noreply@qnx.com> написал:
>>>
>>> Hello,
>>>
>>> We have purchased an Advantech IPC-610H unit and have loaded QNX4.25 using the 2011 Product suite.
>>>
>>> We are having a problem with the graphics driver.
>>>
>>> From show_pci:
>>>
>>> PCI version = 3.00
>>>
>>> Class = Display (VGA)
>>> Vendor ID = 8086h, INTEL CORPORATION
>>> Device ID = 29b2h,
>>> PCI index = 0h
>>> MEM @ fea80000h IO @ dc00h MEM @ d0000000h MEM @ fe900000h
>>> PCI Int Pin = INT A
>>> Interrupt line = 10
>>>
>>> Does anyone have any ideas?
>>>
>>> Thanks,
>>> Pete Mackereth
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>>
>>> General
>>> http://community.qnx.com/sf/go/post112804
>>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112806
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>>
>>
>>
>>
>> _______________________________________________
>>
>> General
>> http://community.qnx.com/sf/go/post112815
>> To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
>> <Diags.tar>
>
>
>
>...
|
|
|
Oleg Bolshakov
01/02/2015 1:07 PM
post112807
|
|
|
|
|