Honey S(deleted)
|
Framebuffer concept in QNX4.25
|
Honey S(deleted)
12/16/2014 12:51 AM
post112696
|
Framebuffer concept in QNX4.25
Dear all,
Is there any framebuffer concept in QNX4.25?
We need to check if any graphics applications can be run in QNX4.25 without using Photon GUI toolkit support
and by accessing framebuffer directly.
We understood that QNX6.4.x supports SDL (libSDL) and using this we can get a framebuffer interface.
But is SDL supported in QNX4.25?
Thanking you,
Honey S
________________________________
Confidentiality Statement / Disclaimer : This message and any attachments is intended for the sole use of the intended
recipient. It may contain confidential information. Any unauthorized use, dissemination or modification is strictly
prohibited. If you are not the intended recipient, please notify the sender immediately then delete it from all your
systems, and do not copy, use or print. Internet communications are not secure and it is the responsibility of the
recipient to make sure that it is virus/malicious code exempt.
The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If you
require any form of confirmation of the contents, please contact the company/sender. The company/sender is not liable
for any errors or omissions in the content of this message.
________________________________
|
|
|
Oleg Bolshakov
|
Re: Framebuffer concept in QNX4.25
|
Oleg Bolshakov
12/17/2014 8:20 AM
post112714
|
Re: Framebuffer concept in QNX4.25
Hello,
I have answered here:
http://community.qnx.com/sf/discussion/do/listPosts/projects.community/discussion.qnx4_community_support.topc25889
Respectfully,
Oleg
16 дек. 2014 г., в 8:50:33, Honey S. <community-noreply@qnx.com> написал:
> Dear all,
> Is there any framebuffer concept in QNX4.25?
> We need to check if any graphics applications can be run in QNX4.25 without using Photon GUI toolkit support
> and by accessing framebuffer directly.
> We understood that QNX6.4.x supports SDL (libSDL) and using this we can get a framebuffer interface.
> But is SDL supported in QNX4.25?
>
> Thanking you,
> Honey S
>
> Confidentiality Statement / Disclaimer : This message and any attachments is intended for the sole use of the intended
recipient. It may contain confidential information. Any unauthorized use, dissemination or modification is strictly
prohibited. If you are not the intended recipient, please notify the sender immediately then delete it from all your
systems, and do not copy, use or print. Internet communications are not secure and it is the responsibility of the
recipient to make sure that it is virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If
you require any form of confirmation of the contents, please contact the company/sender. The company/sender is not
liable for any errors or omissions in the content of this message.
>
|
|
|
Honey S(deleted)
|
RE: Framebuffer concept in QNX4.25
|
Honey S(deleted)
12/19/2014 12:26 AM
post112746
|
RE: Framebuffer concept in QNX4.25
Dear Oleg,
Thank you for the information.
I shall check this possibility of using framebuffer with QNX 4.25 though I have to explore much in this direction. :(
Not fully understood what you are trying to point out as I am a newbie in this concept.
Can you also give some more pointers on how to configure Photon to use framebuffer or just give any references ?
(like links, QNX manuals so that I can refer them in more detail)
By the way, our exact requirement is to port a rendering engine with HTML 4 support to QNX 4.25.
One of the rendering engines under our analysis is having support for framebuffer front end.
We are just analyzing if such a software can be ported to QNX 4.25 by using framebuffer concept in QNX 4.25.
Is there any SDL support in QNX 4.25?
Do you think using framebuffer or using SDL in QNX 4.25 is comparatively easier.
Please share your valuable thoughts on our concern.
Thanks,
Honey S
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 17 December 2014 18:51
To: general-qnx4@community.qnx.com
Subject: Re: Framebuffer concept in QNX4.25
Hello,
I have answered here:
http://community.qnx.com/sf/discussion/do/listPosts/projects.community/discussion.qnx4_community_support.topc25889
Respectfully,
Oleg
16 дек. 2014 г., в 8:50:33, Honey S. <community-noreply@qnx.com> написал:
> Dear all,
> Is there any framebuffer concept in QNX4.25?
> We need to check if any graphics applications can be run in QNX4.25 without using Photon GUI toolkit support
> and by accessing framebuffer directly.
> We understood that QNX6.4.x supports SDL (libSDL) and using this we can get a framebuffer interface.
> But is SDL supported in QNX4.25?
>
> Thanking you,
> Honey S
>
> Confidentiality Statement / Disclaimer : This message and any attachments is intended for the sole use of the intended
recipient. It may contain confidential information. Any unauthorized use, dissemination or modification is strictly
prohibited. If you are not the intended recipient, please notify the sender immediately then delete it from all your
systems, and do not copy, use or print. Internet communications are not secure and it is the responsibility of the
recipient to make sure that it is virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If
you require any form of confirmation of the contents, please contact the company/sender. The company/sender is not
liable for any errors or omissions in the content of this message.
>
_______________________________________________
General
http://community.qnx.com/sf/go/post112714
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
________________________________
Confidentiality Statement / Disclaimer : This message and any attachments is intended for the sole use of the intended
recipient. It may contain confidential information. Any unauthorized use, dissemination or modification is strictly
prohibited. If you are not the intended recipient, please notify the sender immediately then delete it from all your
systems, and do not copy, use or print. Internet communications are not secure and it is the responsibility of the
recipient to make sure that it is virus/malicious code exempt.
The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If you
require any form of confirmation of the contents, please contact the company/sender. The company/sender is not liable
for any errors or omissions in the content of this message.
________________________________
|
|
|
Oleg Bolshakov
|
HA: Framebuffer concept in QNX4.25
|
Oleg Bolshakov
12/21/2014 4:18 PM
post112753
|
HA: Framebuffer concept in QNX4.25
Hello,
I’ll try to answer your question in general. I guess that the best way in your situation is use simple Photon PtRaw-
based application as a framebuffer. Many customers have choosed this option when they ported their framebuffer-based
apps to QNX.
As for SDL. Personally I didn’t hear about any actual working SDL ports to QNX4.
Respectfully,
Oleg
________________________________________
От: Honey S. [community-noreply@qnx.com]
Отправлено: 19 декабря 2014 г. 8:26
Кому: general-qnx4@community.qnx.com
Тема: RE: Framebuffer concept in QNX4.25
Dear Oleg,
Thank you for the information.
I shall check this possibility of using framebuffer with QNX 4.25 though I have to explore much in this direction. :(
Not fully understood what you are trying to point out as I am a newbie in this concept.
Can you also give some more pointers on how to configure Photon to use framebuffer or just give any references ?
(like links, QNX manuals so that I can refer them in more detail)
By the way, our exact requirement is to port a rendering engine with HTML 4 support to QNX 4.25.
One of the rendering engines under our analysis is having support for framebuffer front end.
We are just analyzing if such a software can be ported to QNX 4.25 by using framebuffer concept in QNX 4.25.
Is there any SDL support in QNX 4.25?
Do you think using framebuffer or using SDL in QNX 4.25 is comparatively easier.
Please share your valuable thoughts on our concern.
Thanks,
Honey S
-----Original Message-----
From: Олег Большаков [mailto:community-noreply@qnx.com]
Sent: 17 December 2014 18:51
To: general-qnx4@community.qnx.com
Subject: Re: Framebuffer concept in QNX4.25
Hello,
I have answered here:
http://community.qnx.com/sf/discussion/do/listPosts/projects.community/discussion.qnx4_community_support.topc25889
Respectfully,
Oleg
16 дек. 2014 г., в 8:50:33, Honey S. <community-noreply@qnx.com> написал:
> Dear all,
> Is there any framebuffer concept in QNX4.25?
> We need to check if any graphics applications can be run in QNX4.25 without using Photon GUI toolkit support
> and by accessing framebuffer directly.
> We understood that QNX6.4.x supports SDL (libSDL) and using this we can get a framebuffer interface.
> But is SDL supported in QNX4.25?
>
> Thanking you,
> Honey S
>
> Confidentiality Statement / Disclaimer : This message and any attachments is intended for the sole use of the intended
recipient. It may contain confidential information. Any unauthorized use, dissemination or modification is strictly
prohibited. If you are not the intended recipient, please notify the sender immediately then delete it from all your
systems, and do not copy, use or print. Internet communications are not secure and it is the responsibility of the
recipient to make sure that it is virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized alterations or modifications made to the contents. If
you require any form of confirmation of the contents, please contact the company/sender. The company/sender is not
liable for any errors or omissions in the content of this message.
>
_______________________________________________
General
http://community.qnx.com/sf/go/post112714
To cancel your subscription to this discussion, please e-mail general-qnx4-unsubscribe@community.qnx.com
________________________________
Confidentiality Statement / Disclaimer : This message and any attachments is intended for the sole use of the intended
recipient. It may contain confidential information. Any unauthorized use, dissemination or modification is strictly
prohibited. If you are not the intended recipient, please notify the sender immediately then delete it from all your
systems, and do not copy, use or print. Internet communications are not secure and it is the responsibility of the
recipient to make sure that it is virus/malicious code exempt.
The company/sender cannot be responsible for any...
View Full Message
|
|
|
|